Put me down as another satisfied customer. My trailer hitch & bike rack arrived ahead of schedule and in perfect condition. You had the lowest price I could find on the internet - and a hell of a lot cheaper than in my local stores - and the items were just as promised. Thanks for delivering EXACTLY what I wanted without any hassle at all. Richard
Today on 2012 Ford E-350 full-sized van, we're going to do a test fit of product number S64665 from Swagman. This is the XTC 4 Bike Carrier. We'll start off with our bicycle rack already assembled according to the instructions. And one quick note, that is designed for 2-inch receiver hitches only. Let's go ahead and install the bike rack into the hitch. First, we'll install the anti-rattle bolt and then tighten it down.
Alright today on this 2012 Ford e350 full size van, were going to do a test fit of part number y02425 from Yakima. This is a double down 5 bike carrier. Were going to start off with the bike rack already assembled according to instructions and Ill give you a few notes about this bicycle rack. It is designed for class 2 hitches and with the included spacer this will work on class 3 and class 4 hitches. Alright lets go ahead and install the bike rack into the hitch. First were going to install the anti rattle bolt and tighten it down.
All right today on this 2012 Ford e350 full size van. We are going to test fit part number y02433-02435 from Yakima, the holdup bike rack. Okay we are going to start off with the bicycle rack assembled according to the instructions, so lets go ahead and install the bike rack into the hitch. First well install the anti-rattle bolt and tighten it down. The bike rack does have a tool to tighten the bolt, however; a wrench or a socket will work better. Once the anti-rattle bolt is tightened down, well go ahead and install the lock on the other side.
Alright, today, on this 2012 Ford E-350 full-size van, were gonna do a test fit of the Kuat Bicycle Rack part number N 101-103.Okay, were gonna start off with the bicycle rack already assembled according to the instructions. One thing about this hitch-mounted back rack is that its designed for 2-inch receivers only.Lets go ahead and install the bike rack into the hitch. Were gonna install a locking hitch pin and then well pull back on the bike rack just a little bit and then well go ahead and tighten down the anti-rattle device at the end of the bicycle rack shaft.Now we can give you some measurements that will give you an idea of clearance between the back rack and the van and ground clearance. Between the bike rack and rear doors, the measurement is going to be 11 inches. Our ground clearance lowest point will be 17 inches. Right now, we can unfold the rack and get a measurement at the end of the rack.
Do you have a question?
Have a question about the best bike rack for your Ford Van? click here.