Top 20 Most Popular Ford Escape Ball Mountschange vehicle

#1Ball Mount 3/4" Rise or 2" Drop, 7,500 lbs

Rating:
259 reviews

2923

Price:$17.20

Draw-Tite Ball Mount Review - 2013 Ford Escape

Questions from Ford Escape owners about this product

• Ball Mount for a 2005 Ford Escape Towing a 17 Bass Boat
  
• We recommend using the Ball Mount 3/4 inch Rise or 2 inch Drop, 6,000 lbs, part # 2923, with your 2005 Ford Escape. This will give you the correct rise or drop for a trailer coupler that sits at 17 inches from the ground when level. In order to tow, you will need the hitch, ballmount, pin & clip, hitch ball, and wiring harness. I would be happy to recommend these parts for you. What size coupler do you have? Does your Escape have the wiring tow package?
  view full answer...


• Can I Swap Hitches from Multiple Vehicles When I need to Tow with a Different Vehicle
  
• Part # 75118 will only fit a 2001-2004 Ford Escape/Mazda Tribute. It is not swappable onto a 1990 Taurus or 1998 Grand Marquis. The best hitch we have for towing a boat with your 1998 Mercurcy Grand Marquis is a Class III hitch, part # 13707. The strongest hitch available for a 1990 Ford Taurus is a Class II. Our most popular Class II for your vehicle is part # 36252. Please note, Class I and II are 1-1/4 inch receiver openings.
  view full answer...


• Receiver Height of Curt Class III # 13650 When Installed on 2009 Ford Escape
  
• Assuming that your Escape uses a stock wheel/tire, the top of the receiver for the Curt # 13650 would be 16 inches above the ground. Getting the trailer to tow so that it is level is not an exact science. If you can get it within 1-1/2 to 2 inches of level, you are doing just fine. It is better to have the coupler height a bit higher than level than lower. In addition to the hitch, wiring harness and ball mount, you might also need the following: Pin and clip, part # PC3 Locking stainl
  view full answer...

#2Class II Drawbar 5-1/2" Rise or 6" Drop

Rating:
61 reviews

BM96

Price:$29.95

Questions from Ford Escape owners about this product

• What Ball Mount Will Fit a 1-1/4 Factory Trailer Hitch on a 2001 Ford Escape
  
• There are two possible reasons why some 1-1/4 inch ball mounts might not fit in the factory trailer hitch on your 2001 Ford Escape. First, if the factory trailer hitch is what is considered a Class I trailer hitch, a Class II, 1-1/4 inch ball mount will not fit. They are designed this way for safety. Check the capacity of your factory trailer hitch. If it is 200 pounds tongue weight capacity and 2,000 pounds gross trailer weight, you have a Class I hitch and will need a Class I ball mount. S
  view full answer...

#3Class II Drawbar 5/8" Rise or 1-1/4" Drop (Kit)

Rating:
13 reviews

36051

Retail:$30.96

Price:$22.95

Questions from Ford Escape owners about this product

• What is the Correct Ball Mount for a Class II Trailer Hitch on a 2012 Ford Escape
  
• On Class I and Class II trailer hitches with a 1-1/4 inch receiver, you must use the ball mount specified by the trailer hitch manufacturer. The hitches have only been tested with those specific ball mounts and the use of any other ball mount will void the trailer hitch warranty. If it is a factory hitch, you can ask the dealer the brand of hitch and if there is a certain ball mount to use. If you are getting a Hidden Hitch trailer hitch, # 90108, or a Curt trailer hitch, # 12060, for your E
  view full answer...

#4Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Chrome Balls - 5-1/2" Drop

Rating:
18 reviews

AM3410

Retail:$189.99

Price:$184.95

#5Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs

Rating:
37 reviews

D210

Retail:$87.55

Price:$52.53

#6Class II Drawbar - 4-3/4" Drop

Rating:
12 reviews

36078

Retail:$57.54

Price:$37.95

#7Ball Mount Adjustable Fits 2" Trailer Hitch Receiver, 6,000 lbs

Rating:
29 reviews

80412

Retail:$136.47

Price:$94.95

#8Class II Drawbar 2-5/8" Rise or 3-1/4" Drop (Kit)

Rating:
25 reviews

36071

Retail:$30.96

Price:$22.95

#9Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

C45521

Retail:$39.03

Price:$23.42

#10Sportframe Drawbar 2-1/8" Rise or 2-3/4" Drop 2000# Kit

Rating:
67 reviews

3593

Retail:$27.97

Price:$21.95

#11Ball Mount 2-3/4" Rise or 4" Drop - 7,500 lbs

Rating:
95 reviews

2753

Price:$21.17

#12Stainless Steel Ball Mount 3/4" Rise or 2" Drop, 6,000 lbs

Rating:
16 reviews

CR-701

Price:$39.95

#13etrailer.com 2-3/4" Rise or 4" Drop Ball Mount Kit - 6,000 lbs

Rating:
43 reviews

EBMK4

Price:$63.22

#14Cushioned Ball Mount for 2" Hitches - 3/4" Rise - 2" Drop - 10,000 lbs

Rating:
23 reviews

AMSC2

Retail:$70.00

Price:$58.95

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Ford Escape

#15Trailer Hitch Ball Mount 3/4" Rise or 2" Drop

Rating:
18 reviews

D-4

Retail:$28.08

Price:$16.85

#16Forged Ball Mount 3" Rise or 4" Drop, 16,000 lbs

Rating:
20 reviews

40331

Retail:$52.65

Price:$42.95

#17Curt Class II Drawbar - 3/4" Rise, 1-1/4" Drop - 6-3/4" Long - 3,500 lbs

Rating:
3 reviews

C45518

Retail:$35.62

Price:$21.37

#18Draw-Tite Class III Ball Mount with 2" Ball - 3/4" Rise, 2" Drop - 6,000 lbs

Rating:
9 reviews

DT40563

Price:$33.48

#19Ball Mount Class III 3/4" Rise or 2" Drop - Super Extra Long, 6,000 lbs

Rating:
68 reviews

80232

Retail:$38.45

Price:$29.95

#20Curt Class II Drawbar - 2-1/8" Rise, 2-3/4" Drop - 7-1/2" Long - 3,500 lbs

Rating:
6 reviews

C45501

Retail:$22.91

Price:$13.75