view cartView Cart

Select Your Vehicle


Top 20 Most Popular Ford Edge Bike Rackschange vehicle


Choose Your Year


Filter Racks by Type

Number of Bikes

All Other Bike Racks

Need a base rack?

What our customers are saying:

Quick delivery...Thank you. I placed the order on Sunday evening and we received the bike rake on Tuesday...free of charge. Cant beat that.

Kimberly

Sugar Grove, IL






Ford Edge Hitch Bike Racks Videos

Saris Thelma 3 Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge we'll be test fitting the Saris Thelma hitch mounted 3 Bike Rack for inch and a quarter inch, 2 inch hitches, part number SA4239B. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up our pin holes we'll thread in our anti-rattle bolt, tighten it down using a wrench, and then secure with a clip on the other side.With the bike rack secured we'll go over a few clearance measurements to see how the two fit together. Closest part of the bike rack to the closet part of the vehicle is about 2 inches away and we've added about 12 and a 1/2 inches to the overall length of our Ford. 3We can now remove the gold pin at the base of the bike rack and fold down the platform. With the platform down we have about 15 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 3 inches away and we've added about 36 inches to the overall length of our edge. With the platform down you can see that we do have access to the rear hatch.



Softride Hang2 Tilting Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge, we'll be test fitting the Softride Hang2 Hitch Mounted 2-Bike Rack, part number SR27041. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes, we'll thread in our anti-rattle bolt, and tighten it down using the wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 11" of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 2-3/4" away, and we've added about 21" to the overall length of our vehicle. To load up a bike, we'll need to remove the two silver pins at the top of the mast. This will allow us to swing the top bar of the bike rack out. When unfolding the top bar of the bike rack, you want to make sure that you keep a steady hold on it, as it could slide back and hit the back of your vehicle. After lining up the holes, we'll then re-insert the silver pin to secure it in place.



Softride Element Hitch Mounted Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge we'll be test fitting the Softride Element Parallelogram Hitch Mounted Hanging 4-Bike Rack, part number SR26248. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes, we'll thread in our anti-rattle bolt and then tighten it down using a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 11 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle's about two inches away and we've added about 11 inches to the overall length of our Ford. We'll now go ahead and remove the two silver pins at the top of the mast. We'll swing the cradle arms outward and line up the pin holes to reinsert the sliver pins.



Saris Freedom Hitch Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge, well be test fitting the Saris Freedom Hitch Mounted Platform Style Four Bike Rack for 2 inch hitches, part number SA4414B. Well begin our test by sliding the shank of the bike rack into the opening of the hitch. After lining up our pin holes, well thread in our anti-rattle bolt, tighten it down with a wrench, and then secure it with the clip on the other side. With the bike rack secured, well go over a few clearance of measurements to see how the two fit together. We have about 13 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about 2 inches away.



Saris Freedom 2 Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge, we'll be test fitting the Saris Freedom platform style hitch mounted two bike rack for 1 1/4 and 2 inch hitches, part number SA4412B. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes, we'll thread in our anti-rattle bolt, tighten it down using a wrench and then secure it with the clip on the other side. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 14 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 9 inches away and we've added about 24 inches to the overall length of our Edge.



Saris Axis 3 Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge, we'll be test fitting the Saris Axis, Aluminum Hitch Mounted, Hanging 3-Bike Rack, part number SA843B. We'll begin our test fit by sliding the shank of the bike rack into the opening the hitch. After lining up our pin holes, we'll thread in our anti-rattle bolt and tighten it down using a wrench. You then secure the lock on the other side. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 11 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about four and a half inches away and we've added about 13 inches to the overall length of our Ford. We can now lift up on the yellow levers on the upper left and right hand corner of the back rack. This allows us to slide the arms off the grooves, onto the smooth part and raise the cradle arms up.



Saris Axis Tilting 2 Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge, we'll be test fitting the Saris Axis Hitch Mounted 2 Bike Rack For 1-1/4" and 2" Hitches, part number SA832B. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pin holes, we'll thread in our anti-rattle bolt, tighten it down with a wrench, and then secure it with a clip on the other side. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have 11" ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 5" away, and we've added about 13" to the overall length of our Ford. We can now loosen up the black knobs on the upper left and right hand corner of the mast. This will allow us to slide the cradle arms off the grooves onto the smooth portion of the rack. We'll raise the cradle arms up and slide them back over the grooves.



Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2011 Ford Edge

Today on our 2011 Ford Edge we'll be test fitting the Swagman XTC2, 2-bike platform bike rack for 1 1/4 and 2 inch hitches, part #S64670. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of the hitch. We'll line up the pin holes and thread in our anti-rattle bolt, tightening it with a wrench. Now we'll go over a few clearance measurements. We have a ground clearance of about 14 1/2 inches. The closest point of the bike rack to the rear of our SUV is about 4 1/4 inches and we've added about 19 inches to the overall length of our Ford Edge. We'll pull the three pins at the base of the bike rack and allow the different parts to unfold. This gives us full access to our rear hatch door.



Swagman Titan Hitch Bike Rack Review - 2011 Ford Edge

Today on our 2011 Ford Edge, we'll be test-fitting the Swagman Titan four bike rack for inch and a quarter and 2 inch hitches, part number S63410. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of the hitch. We'll line up the pin hole and thread in our anti-rattle bolt tightening it with a wrench. Now we'll go ahead and go over a few clearance measurements. We have a ground clearance of about 14 inches. The closest point of the bike rack to the rear of our Ford Edge is about 6 1/2 inches. We've added about 18 inches to the overall length of our vehicle. We'll pull the lever at the base of our bike rack on the back side of the mast.



Rhino-Rack 4 Hitch Bike Rack Review - 2011 Ford Edge

Today on our 2011 Ford Edge, we'll be test-fitting the Rhino Rack four bike rack for 2 inch hitches, part number RBC038. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of the hitch. We'll line up the pin hole and thread in our anti-rattle bolt, tightening it with a wrench, then we can install our lock on the same side. Now we'll go over a few clearance measurements. We have about 11 inches of ground clearance. The closest point of the bike rack to the rear of our Ford Edge is about 3 1/2 inches. We've added about 10 1/2 inches to the overall length of our vehicle. We'll pull the pin at the base of the bike rack and allow it to tilt away from our Ford Edge. This gives us full access to our rear hatch door.



Rhino-Rack 4 Hitch Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge we'll be test fitting the Rhino Rack hitch-mounted 4-bike rack for 2 inch hitches, part number RBC038. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti-rattle bolt, tighten it down with a wrench and secure it with the lock. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. From the back of the bike rack, we have about 17 inches of ground clearance. Lowest point of the bike rack is about 12 inches from the ground. The closest part of the bike rack to the closest part of the vehicle is about 1 3/4 inches away.



Swagman XTC4 Wheel Mount Hitch Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge, well be test fitting the Swagman XTC4 Platform Style Hitch Mounted Four Bike Rack, part number S64665. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well thread in our anti-rattle bolt, and tighten it down using a wrench. With the bike rack secured, well go over some clearance of measurements to see how the two fit together. We have about 11 inches of ground clearance. Now as you can see, the platform when folded up does have a little bit of wiggle room.



Hollywood Racks Traveler Tow n Go Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge we'll be test fitting the Hollywood Racks Traveler Tow N Go three bike rack for two-inch ball mounts, part number HR135. For today's test fit we'll be using the Hidden Hitch ball mount with an extra long shank, part number 80232. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch. After securing it with a pin and clip we're ready to load up our bike. Keep in mind the ball mount, hitch ball and pin and clip are all sold separately. See our web site for more details. We'll remove the black pin at the top of the mast and swing out our dual arms.



SportRack Super EZ Hitch Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge we'll be test fitting the SportRack Super EZ platform style two bike rack, part number SR2901LR. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After threading in our anti rattle bolt we'll tighten it down with a wrench and secure it with a lock on the other side. With the bike rack secured, we'll go over a couple of clearance measurements to see how the two fit together. We have about 13-1/2 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about nine inches away, and we've added about 24 inches to the overall length of our vehicle. To access the rear hatch, we can pull the three black pins at the base of the bike rack and tilt the wheel cradles down as well as the mast. As you can see, we can easily gain access to the rear hatch.



Thule Helium Aero Hitch Bike Rack Review - 2013 Ford Edge

Today, on our 2013 Ford Edge, we'll be test fitting the Thule Helium Aero Hitch-Mount 2 0:05 Bike Rack for 2 inch hitches, part number TH9042. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll allow the integrated hitch pin to fall into place and we'll then turn the black knob at the back of the shank to engage the anti-rattle device. With the back rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 17 inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about 3-1/4 of an inch away. With the cradle arms down, we've added about 16-1/2 inches to the overall length of our Ford.



Yakima StickUp 2 Hitch Bike Rack Review - 2011 Ford Edge

Speaker: Today on our 2011 Ford Edge we'll be test fitting the Yakima Stickup Two Bike Hitch Mountain Bike Rack for inch and a quarter and two inch hitches Part No. Y02420. To begin our test fit we'll slide the shank of the bike rack into the receiver tube of the hitch. Line up the pinhole and thread in our anti-radical tightening it with a wrench. Now we'll go over a few clearance measurements. We have about 11 and a half inches of ground clearance. The closest point of the bike rack to the rear of our Ford Edge is about an inch and we've added about 10 inches to the overall length of our vehicle. We'll pull the pin with the red knob at the base of our bike rack and allow our bike rack to unfold. With the bike rack in this position we have full access to our rear hatch door.



Yakima HoldUp 2 Hitch Bike Rack Review - 2011 Ford Edge

Today on our 2011 Ford Edge, we will be test fitting the Yakima Holdup, two bike rack for 2 inch hitches, part number Y02443.To begin our test fit, we will slide the shank of the bike rack into the receiver tube of the hitch. We will line up the pin holes and thread in our anti-rattle bolt, tightening it with a wrench and installing our lock on the other side.Now we will go over a few clearance measurements. We have about 11 inches of ground clearance. The closest forward 00:00:29 of the bike rack to the rear of the vehicle is about 2 inches. We have added about 9 inches to the overall length of our Ford Edge.We will pull the pin with the red knob at the base of our bike rack to allow it to unfold. This gives us full access to our rear hatch door.



Yakima HighLite 2 Hitch Bike Rack Review - 2011 Ford Edge

Today, on our 2011 Ford Edge, well be test fitting the Yakima Highlite Aluminum 2-Bike Rack for inch and a quarter and two inch hitches, part number Y02438. To begin our test fit, well slide the shank of the bike rack into the receiver to the hitch. Well line up the pin hole, install the attached pin and tighten the hand knob here at the rear to secure our bike rack to our vehicle and engage our anti-rattle device. Now, well go over a few clearance measurements. We have about 11 inches of ground clearance. The closest part of the bike rack to the rear of our edge is about three and a half inches. Weve added about 10 inches to the overall length of our Ford Edge. Well pull the pin with the red knob on the back side of the mast. This will allow the bike rack to tilt away from the vehicle.



Thule Vertex 4 Hitch Bike Rack Review - 2011 Ford Edge

Speaker: Today on our 2011 Ford Edge we'll be test fitting the Thule Vertex Four Bike Rack four inch and a quarter and two inch hitches Part No. TH9029. To begin our test fit we'll slide the shank of the bike rack into the receiver tube of the hitch. Line up the pinhole and thread in our anti-rattle bolt tightening it down with a wrench. Now, we'll go over a few clearance measurements. We have about 11 and a half inches of ground clearance. The closest point of the bike rack to the rear of our Edge is about 3 inches and we've added about 11 inches to the overall length of our vehicle. We'll pull the lever at the base of our bike rack and allow the bike rack to tilt away from our vehicle.



Thule T2 Platform Style Hitch Bike Rack Review - 2011 Ford Edge

Today on our 2011 Ford Edge we'll be test fitting the Thule T2 platform-style 2-bike rack for 2" hitches, part number TH916XTR. To begin our test fit we'll slide the shank of the bike rack into the receiver tube of the hitch, line up the pinholes, and thread in our anti-rattle bolt, tightening it with a wrench and installing the lock on the other side. Now we'll go over a few clearance measurements. We have a ground clearance of about 11". The closest point of the bike rack to the rear of the vehicle is here at one of our wheel cradles. This distance is within 1/8". We've added about 11" to the overall length of our Ford Edge.





Ford Edge Roof Bike Racks Videos

Thule Domestique Roof Bike Rack Review - 2011 Ford Edge

Today on our 2011 Ford Edge we'll be test fitting the Thule Domestique Fork Mounted Bike Carrier, part number th513. With a roof rack system already assembled onto our vehicle we'll go ahead and place our carrier directly onto our load bars. We'll take the front clamp and place it around our front load bar feeding the bolts through the top and tightening our bolts with an Allen key.Once we have our front clamp secured we can then move to the rear. We'll fit our clamp around the rear load bar making sure our bolts are in the proper place and then tighten with an Allen key. We'll go back to the front and install our skewer. We'll go ahead and make sure we leave it open for easier loading of our bike.We'll move to the rear and undo the rear wheel strap.



Thule Circuit Roof Bike Rack Review - 2011 Ford Edge

Today on our 2011 Ford Edge we'll be test fitting the Thule Circuit Roof Mounted Bike Carrier, part number th526. With a roof rack system already assembled onto our vehicle we'll begin by placing our carrier directly onto our load bars. We'll take our front clamp and fit it around our front load bar. We'll lift the nose lever and place our T-bolt into our front clamp.We'll go ahead and tighten it with our hand. Once we get it snug we can then close the nose lever which tightens it more and secures our carrier to our front bar. Now we'll move to the rear and we'll bring our rear clamp around our rear bar, fit it around our bolt and tighten with a wing nut.Now we'll move back up to the front of the carrier and install our skewer.



Swagman Fork Down Roof Bike Rack Review - 2011 Ford Edge

Today on our 2011 Ford Edge we'll be test fitting the Fork-Style Roof Mounted Bike Carrier from Swagman, part number s64710. With a roof rack system assembled onto our vehicle we'll begin by placing our carrier directly on top of our load bars. We'll begin at the front. We'll take our U-bolts bring them up through our bracket from underneath our front load bar.We'll secure our U-bolts by tightening down the wing nuts from the top of our carrier. Once we have both the clamps at the front tight we can then move to the rear of the carrier where we'll feed the U-bolt through the top of our carrier around our load bar. We'll bring our clamp up underneath our rear load bar making sure that our U-bolts go through the clamp and tighten with the wing nuts.This secures our carrier to our roof rack system.



RockyMounts TieRod Stretch Roof Bike Rack Review - 2011 Ford Edge

Today on our 2011 Ford Edge, well be test fitting the Rocky Mounts TieRod Stretch Roof Mounted Bike Carrier part number RKY1011. With a roof rack system already assembled on to our vehicle, well go ahead and place our carrier directly on top of the load bars. Well remove the front cover to gain access to the Allen bolt where we can tighten down the straps by using an Allen Key. Once we have the front part of our carrier secured we can go ahead and replace our black plastic cover and then move to the rear. Well fit our bracket around our rear load bar, feed the bolt through, make sure our bolts are in place and tighten down with an Allen key. With our bike rack secured to our roof rack system we can then prepare to load our bike.



Yakima ForkLift Roof Mounted Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge we're going to be test fitting the Yakima Forklift Roof Mounted Bike Carrier, part number y02098. Now our Ford Edge is already equipped with a Yakima roof rack system so we're going to mount our Forklift directly to those crossbars. To do this we'll remove the skewer from the head of the bike rack first. We'll open up the clamp at the head of the bike rack and fit it around our front crossbar, and then we'll tighten it down with the t-bolt and wing nut. We'll slide the cover back into place and then we can reinstall our skewer. At the back we'll need to slide the clamp over our rear crossbar, and again tighten it down with the t-bolt and wing nut.



Yakima FrontLoader Roof Bike Rack Review - 2013 Ford Edge

On our 2013 Ford Edge, were going to be test fitting the Yakima Frontloader Roof Mounted Bike Carrier, part number Y02103. Our Ford Edge is already equipped with the Yakima roof rack system, so were going to go ahead and mount the frontloader directly to the crossbars. Well take the carrier and set it up onto of our crossbars, well fit the head of our bike carrier around the front crossbar and use the hand knob to tighten down the clamp and then well take the clamp on the rear and slide it over our rear crossbar using the T-bolt and included wing nut to tighten it down. With that done our bike rack is now secure to our roof rack and were ready to load up our bike. We want to make sure that the front wheel loop is up and open and that our rear wheel strap is open as well. Well then pick up the bike and sit it in the carrier.



Thule Domestique Roof Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge we'll be test fitting the Thule Domestique Fork Mounted Bike Carrier, part number th513. To begin our test fit we'll let the head of the bike rack directly over the front load bar. We can then use the clamps to go underneath the front load bar and bolt it down using the Allen bolts and wrench provided with the bike rack.After tightening down the head of the bike rack we'll move to the back. We'll bring the clamp around the rear load bar and secure it again and using the Allen bolts included with the bike rack. Now we can go ahead and re-insert our skewer into the head of the bike rack. With our skewer installed we'll undo the rear wheel strap and get ready to load our bike.We'll place the front fork of the bike directly into the skewer and tighten it down.



RockyMounts TieRod Roof Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge we're going to be test fitting the RockyMounts TieRod Roof Mounted Bike Carrier, part number rky1014. To begin our test fit we'll mount the bike rack directly to our load bars. We'll lift up the carrier and set it on top of our load bars. Now we can go ahead and feed the straps at the head of the bike carrier around our front bar, lock them into the head and use an Allen key to tighten them down.Then we can reinstall the cover on the head of the bike rack. At the back of the bike rack we use the clamp and the two Allen bolts to secure the rear of the bike rack to our rear load bar. Once we've done that we're now ready to go ahead and load up our bike.



RockyMounts TieRod Stretch Roof Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge we'll be test fitting the RockyMounts TieRod Stretch Roof Mounted Bike Carrier, part number rky1011. Now with our roof rack system already assembled on our vehicle we'll begin our test fit by placing the carrier onto the vehicle's load bars. We'll then remove the black plastic cap, bring the rubber-coated steel straps around the load bar and hook them into position.We can go ahead and tighten them down tightening the silver bolt. We can then move to the rear where we'll bring the bracket around the underside of the rear load bar. We'll then thread the bolt back into the bracket and tighten it down securing the rear of the carrier to the rear load bar.Now that our carrier is secured to our vehicle we'll loosen up the rear wheel strap and place our bike onto the carrier. We'll slide the forks of the bike into the open skewer and tighten it down.





Ford Edge Trunk Bike Racks Videos

Thule Raceway Trunk Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge we'll be test fitting the Thule Raceway Trunk Mounted Two Bike Carrier, part number th9001. Now to begin our test fit we'll first need to refer to the Thule Fit Guide or the included instructions to determine what number our Fit Dial should be at. According to the Thule Fit Guide our Fit Dial should be set at nine.After setting our Fit Dial we'll place the carrier onto the vehicle. Again, referring to the Thule Fit Guide it states that our lower arm of the carrier should rest at the bottom of the license plate well. We'll go ahead and put the top hooks to the top part of the trunk above the spoiler and then we'll put the bottom hooks to the bottom part of the trunk.You may need to open up the cargo door to get the bottom hooks in place. Now we can go ahead and turn the knobs on the left and right hand side of the carrier to tighten down the straps to secure the carrier to our vehicle.



Thule Passage Trunk Mounted Bike Rack Review - 2013 Ford Edge

Today, on our 2013 Ford Edge, we'll be test fitting the Thule Passage Truck-Mounted Two-Bike Carrier, Part Number TH910XT. Before we begin our test fit, we'll first need to refer to the Thule fit guide or the included instructions to determine what number or fit dial should be set at. After getting our fit dial, which in this case is nine, we'll set the carrier on to our vehicle.We'll go ahead and put the top hooks to the top part of the cargo door above the spoiler. The bottom hooks to the bottom part of the trunk and the side hooks to the side part of the trunk, just a little bit above the taillights. You may need to open up the cargo door to position the bottom hooks in place. Once you have all the hooks in place, we'll then go ahead and tighten down each strap to secure the carrier to our vehicle. Once we have the carrier secured, we're ready to load up our bike.



Thule Gateway Trunk Mount Bike Rack Review - 2013 Ford Edge

Today on our 2013 Ford Edge we'll be test fitting the Thule Gateway Trunk Mounted Two Bike Carrier, part number th9006xt. Now before we begin our test fit we'll first need to refer to the Thule Fit Guide or the included instructions to see which number we need to set our Fit Dial to. For this vehicle we'll set our Fit Dial to number nine and go ahead and prepare to set the carrier onto the vehicle.The bottom part of the carrier needs to be sitting on the cargo door just below the license plate. We'll hook the top hooks to the top part of the cargo door, the side straps to the side of the cargo door just above the taillights and the bottom hooks to the bottom of the cargo door. You may need to open your cargo door to get the hooks to fit in properly without damaging your vehicle.Now we can go ahead and tighten down our straps. Once the straps are tight the carrier is now secured to the vehicle and we're ready to load up our bike.





Ford Edge Hitch Bike Racks Questions



Ford Edge Roof Bike Racks Questions



Ford Edge Trunk Bike Racks Questions









Stay Connected


Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email






etrailer.com reviewsetrailer.com reviews

All images, layout and content copyright etrailer.com