Top 20 Most Popular Chevrolet Silverado Bike Rackschange vehicle

Thule Apex 4 Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado we'll be test fitting the Thule Apex Four Bike Carrier, part number th9025. To begin our test fit we'll slide the shank of the bike rack into the hitch and allow the integrated locking hitch pin to fall into place. We can then move to the anti-rattle knob where we'll tighten it down securing our bike rack to the vehicle.Now we'll go ahead and go over a few clearance measurements. We have a ground clearance of 17 1/2 inches. The closest point of the carrier to the closest point of our vehicle is about four inches. With the bike carrier in its folded position we've added about 13 inches to the overall length of our vehicle.

Yakima HighLite 2 Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on 2013 Chevrolet Silverado, well be test fitting the Yakima Highlite Aluminum two bike carrier, part number y02438. To being to test fit, well slide the shank of the bike rack into our hitch, line up the pin hole, and insert the red safety pin into the pin hole. Then we can move our way to the back and tighten up the black knob on the back of the carrier, this engages the anti-rattle feature and secures our bike carrier to our vehicle.Now lets go over some clearance measurements. We have about 17 of ground clearance. From the closet point of the carrier to the closet point on the rear of the vehicle is about six inches, with the bike carrier in the folded position, weve added about 11 to the overall length of our vehicle. Well now go ahead and pull up on the red knob pin on the back of the mast to tilt down our bike carrier.As you can see we can still open our tailgate door with it making little or no contact to the bike carrier.

Yakima DoubleDown Ace Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on 2013 Chevrolet Silverado, well be test fitting the Yakima Doubledown Ace Four bike carrier, part number y02451. To being to test fit, well slide the shank of the carrier into the opening of the hitch, line up the pin hole, and insert the pin with the red knob into the pin hole. Then we can turn the black knob to engage our anti-rattle device.Now with the carrier secured to the vehicle, well go over a few clearance measurements. We have a ground clearance of 17. From the closet point of the carrier to the closet point of the bike rack is about seven inches. With the bike carrier in the folded position weve added about 12 to the overall length of our vehicle.

Thule Vertex 4 Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado, well be test fitting the Thule Vertex for Bike Carrier part number TH9029. To begin our test fit well slide the shank of the carrier into the opening of our hitch, line up the pin holes and then thread in our anti-rattle bolt through the pin hole and tighten with a wrench. Now well go ahead and go over some clearance measurements. We have a ground clearance of about 17 inches. From the closest point on the carrier to the closest point on the rear of the vehicle is about four inches. With the bike rack in its folded position weve added thirteen inches to the overall length of our vehicle.

Thule T2 Platform Style Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado, well be test fitting the Thule T2 Platform Style Bike Carrier part number TH916XTR. To mount the carrier on the vehicle, well insert the shank of the carrier into our receiver tube, line up the hitch pinhole and thread in our anti-rattle bolt, tightening it with a wrench. Once weve done that well go over some clearance measurements. We have about 17 inches of ground clearance. From the closest point of the carrier to the closest point on the rear of our vehicle is about six inches. With the bike carrier folded up, weve added 14 inches to the overall length of our vehicle.

Thule Apex 4 Swing Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be testing the Thule Apex Swing for Bike Carrier part number TH9027. Well begin by sliding the bike rack shank into the hitch and allow the integrated locking hitch pin to fall into place. We can then move to the anti-rattle knob where well tighten down the knob, securing our bike rack to the vehicle. Now we can go ahead and go over some clearance measurements. We have about 17 inches of ground clearance. The closest point of the carrier to the closest point of the rear of our vehicle is about two inches apart.

Softride Dura Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado, well be test fitting the Softride Dura Parallelogram, part number SR26247. Were going to begin by sliding the shank of the carrier into our hitch. Well line up the hitch pinhole and install our anti-rattle bolt. Well go ahead and tighten it with a wrench and then install our lock. At this point well go ahead and go over a few clearance measurements. We have a ground clearance of about 17 inches and the closest point of the carrier to the closest point on the rear of the vehicle is about 7 inches.

Prorack 2 Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado, well be test fitting the Prorack 2 Bike Carrier, part number PR8062403. To begin our test fit, well go ahead and slide the shank of the carrier into the receiver tube of our hitch, line up the hitch pinhole, thread in our anti-rattle bolt, go ahead and tighten it with a wrench and put the clip on the other side. Now well go ahead and go over a few measurements. We have a ground clearance of about 16 inches. The closest point of the vehicle to the closest point of our carrier is about 4 inches. Weve added 27 inches to the overall length of our vehicle. Now go ahead and pull the pin at the base of the mast to allow our bike carrier to tilt down.

Swagman Titan Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the Swagman Titan hitch mounted bike carrier part #: S63410. To mount the carrier to the vehicle well insert the shank of the carrier into the receiver tube of our hitch. Well line up the hitch pinhole and thread in our anti-rattle bolt. Now we can go ahead and tighten it down using a wrench. Next, well go over a few clearance measurements. We have a ground clearance of 17 and a half inches.

Rhino-Rack 4 Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado we're going to be test fitting the Rhino Rack Four Bike Carrier for Two Inch Hitches, part number rbc038. To mount our carrier to the vehicle first we'll go ahead and insert the shank of the carrier into the receiver tube of our hitch. We'll line up the hitch pin hole and thread in our anti-rattle bolt and tighten it down using a wrench and then go ahead and secure it with the lock.Now we'll go over a few clearance measurements. We have a ground clearance here of 19 inches. The closest point of the carrier to the closest point to the rear of the vehicle is about six inches. With the bike rack in its folded position we've added 14 inches to the overall length of our vehicle.

Kuat Sherpa Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado we'll be test fitting the Kuat Sherpa Hitch Mounted Bike Carrier, part number s102. To begin our test fit we'll slide the shank of the bike rack into our hitch. We'll line up the pin hole and slide in the hitch pin. We can then move to the back of our carrier and tighten down the hand knob engaging our anti-rattle device in securing our bike rack to the vehicle.We'll now go ahead and go over a few clearance measurements. Our ground clearance here is about 18 inches and from the closest point of the carrier to the closest point of the rear of our vehicle is about three inches. With the bike rack in its folded position we've added 15 inches to the overall length of our vehicle.

Kuat NV Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the Kuat Aluminum Hitch-Mounted 2-Bike Rack with wheel mount cradles, part number n101. To begin our test fit well slide the bike rack shank into our hitch, line up the pin hole and slide in the hitch pin. Well then move to back of the shank and slide in the hitch pin. Well then move to the back of the shank and tighten the anti-rattle knob securing the bike rack to our vehicle. With that done well go ahead and go over a few clearance measurements. We have a ground clearance of 17 1/2 inches.

Hollywood Racks Traveler Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the Hollywood Racks Traveler four bike carrier part #: HR8500. To begin our test fit well slide the shank of the carrier into the receiver tube of our hitch. Well line up the pinholes and thread in our anti-rattle bolt, tightening it with the wrench. Now with the carrier secured to the vehicle well go ahead and go over a few clearance measurements. We have a ground clearance of about 17 inches. The closest part of the carrier to the closest part of the rear of our vehicle is about two inches.

Hollywood Racks Traveler 5 Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today, on our 2013 Chevrolet Silverado, will be testing the Hollywood Racks Traveler Five-Bike Carrier, part number HR 9200. To begin accessible solution to the carrier in the opening of the hitch one of the panel that threaten rates are readable tiny met with the rich melons over some Christmas gifts we are brothers of the 17 inches from goes for the curtain calls for the vehicle is the detentions with by carrier in the fall that position we've added 16 inches to build release of a vehicle no little bit above the mass tool of accurate to ~ out as you can see we can fully in access until the area of a vehicle without making contact the picture with like you're up once was the top since it was enough to Sonoma crew OPS and go in cycles of that citron occurred was the opposition without some folder that about 42 inches of overall into the vehicle looked like we want me to the crew straps run them so the bike and a singles and secure with the straps with that of a accused element of them were ready to go the complicity assess the full hour were exiled five like your partner HR 9200 or 2013 Chevrolet Silverado.

Hollywood Racks Sport Rider SE2 Bike Rack Review - 2013 Chevrolet Silverado

Today, on our 2013 Chevrolet Silverado, we will be testing the Hollywood Rack Support Rider SE-2 Two-Bike Carrier for 2-inch Hitches, part number HR-1450. To begin our test fit, we will slide the bike rack shank into the hitch, line up the pinhole and slide in the hitch pin. With our hitch pin in, we will move to the back of the shank, we will tighten down the knob, securing our bike rack to the vehicle. Now that our bike rack is secure, we will go ahead and go over a few clearance measurements. We have about 17 inches of ground clearance. From the closest point of the carrier, to the closest point to the rear of the vehicle, is about 8 inches.

Kuat Beta Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the Kuat Beta Aluminum Folding 2-Bike Hitch-Mounted Bike Carrier for 2 inch hitches, part number b202-2. To begin our test fit well slide the shank of the carrier into our hitch, line up the pin hole and install the included hitch pin. Well go ahead and put the clip on the other side of the pin where well move to the back of the shank and tighten the knob down securing the anti-rattle device. At this point well go over a few clearance measurements. Our ground clearance here is 16 inches. From the closest point of the bike rack to the closest point of the carrier is about 5 inches.

Hollywood Racks Sport Rider Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the Hollywood Racks Sport Rider 2-Bike Platform-Style Bike Carrier, part number HR1000. To begin our test fit well slide the shank of the carrier into the receiver tube of our hitch. Well line up the pinholes, and install our anti-rattle bolt tightening it with a wrench. With that our bike rack is now secured to our vehicle. We can go ahead and go over a few clearance measurements. We have a ground clearance of about 17 inches.

Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado, we'll be test fitting the Swagman XTC2 2 Bike Carrier for both 1-1/4-inch and 2-inch hitches, part number S64670. Now to begin the test fit, we'll slide the bike rack shank into the hitch, line up the hitch pin hole, and install and tighten down our anti-rattle bolt. With the bolt tight, our bike rack is secured to the vehicle. Now, we'll go ahead and give you a few measurements. Our ground clearance at the bike rack is 19 inches and from the closest point of the bike rack to the back of the vehicle is 5 inches. We'll next go ahead and unfold the bike rack platform and open our tailgate.

Pro Series Eclipse 4 Hitch Bike Rack Review - 2013 Chevrolet Silverado

Today on our 2013 Chevrolet Silverado well be test fitting the Pro Series Eclipse Four Bike Carrier, part number 63124. To begin our test fit well slide the bike rack shank into the hitch, line up the hitch pin hole, and install and tighten down our inaudible 0:00:15:0. With the bolt tight, our bike rack is secured to the vehicle. Now well go ahead and give you a few measurements. Our ground clearance at the back of the bike rack is 15 inches, and from the closest point of the bike rack mast to the back of the vehicle is five inches. Well now go ahead and pull the pin here at the bottom of the mast to allow the mast to tilt down.

Yakima BedHead Truck Bed Bike Rack Review - 2005 Chevrolet Silverado

Alright today, on our 2005 Chevrolet 2500HD 8-Foot Bed Pickup Truck, we're going to do a test fit of Yakima part number Y01133 for locking bedhead. Alright, one quick note about this bike carrier is that it does grip to the side of the bed of the truck and you cant use it with bed liners. However, if you would accommodate for it, you may have to cut a hole in for a bed liner. In this case, we dont have a bed liner so it will be very easy to see how it operates. We'll start off by positioning the rail clip and then well put the fork lock in position. Once we have it where we want it, we'll go ahead and tighten it down with the provided Allen key.

Topline Truck Bed Bike Rack Review - 2005 Chevrolet Silverado

All right today on Chevrolet 2500 HD a foot bed pick up we are going to do a test fit a part number UG2500 this is from top line. Okay well start of bike carrier loss assemble as according instruction will go ahead and put on a rail. Now this will sit on to side rail of the bed. Now the truck didnt have a bed liner you would have to cut whole lot for that to make an accommodation for the rack. This case the truck does not have the bed liner. Well start up by installing the bed roof clamp assembly.

Thule Truck Bed-Rider Bike Rack Review - 2005 Chevrolet Silverado

Alright today on this 2005 Chevrolet 2500 8-foot bed we're going to do a test fit of product number TH822XT from Thule. This is their Bed Rider Bicycle Rack. Alright, a couple of quick notes about this bike rack. It is designed for two bikes and it's also not recommended to use with over the rail bed liners. Now we've got our bike rack already assembled according to instructions so it's just a matter of finding a place on the truck and clamping it into place. We'll start off with the lock open and then move ahead and adjust the width to match the bed, and then we'll twist the whole rack to expand it so it gets a crib on the bed.

Swagman Pick-Up Truck Bed Bike Rack Review - 2005 Chevrolet Silverado

Alright, today on the 2005 Chevrolet 2500 pickup truck, 8-foot bed, we're going to do a test fit of product number S64702 from Swagman. This is the Pickup Rack 2 Bike Carrier. The rack has already been assembled according to instructions so it's just a matter of finding a place on a truck bed to load it up. Well, a couple of quick notes about this, is that it does not work well with over rail bed liners. Under the rail would be fine. We'll start off with the rack in the open position.

Swagman Pick-Up Truck Bed Bike Rack Review - 2012 Chevrolet Silverado

Alright today on this 2012 Chevrolet Silverado, 8 foot bed, we are going to do a test fit of Swagman Bicycle Rack, part number s64702. Couple quick notes about this bicycle rack is that it mounts to the top of the truck bed, and can fit any size truck bed, and carries up to two bikes. And also there is a integrated lock that secures the rack to the truck bed. Pretty simple device lets go ahead and install it. You want to start off with the bike rack in its open position. You will see how it has a angle to it.