Top 20 Most Popular Chevrolet Colorado Bike Rackschange vehicle

SportRack EZ Hitch Bike Rack Review - 2012 Chevrolet Colorado

Yakima StickUp 2 Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on 2012 Chevrolet Colorado well be test fitting part number y02420, the Yakima StickUp 2 folding Bike Rack. To begin our test fit, weve already installed our bike rack shank into the hitch, lined up the hitch fin hole and installed anti-rattle bolt so our bike rack is secure to the vehicle. Now well go ahead and give you a few measurements. Now our ground clearance at this bike rack is 16 inches and from the closest point of the bike rack to the back of the vehicle is 6 inches. Now well go ahead and fold the platform down and open our tailgate. Now our tailgate does hit the bike rack before it opens up completely.

Yakima SwingDaddy 4 Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our this 2012 Chevrolet Colorado well be test fitting part number y02422 Yakima Swing Daddy 4 Hitch Bike mounted bike rack. Now to begin our test fit well install our bike rack shank into the hitch, line up the hitch pin hold and install our anti-edible. With bow tight, our bike rack is secured to the vehicle. At this point, we can give you a few measurements. Our ground clearance at the bike rack is 16 inches. From the closest point, the bike rack to the back of the vehicle is 6 inches.

Pro Series Eclipse 4 Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our this 2012 Chevrolet Colorado with are going to be testing fitting part 63124, the tow ready four bike hitch mounted bike rack. Now to begin our test fit well simply bike rack shink into the hitch, right up the hitch bin hole and install our anti-retable and that will secure our bike rack to the vehicle. Now well go ahead and pull the pin at the bottom of he mast of our bike rack and well tilt the mast out of the way. We can then attempt to open our tail tailgate and then as you can see we can open the tailgate getting access to our cargo area. Well now undo the straps exposing our cradles. We can place the bike into the cradles and the straps around securing it to the bike rack.

Thule Vertex 4 Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevrolet Colorado we'll be test fitting part number TH9029 the Thule Vertex 4 Bike Carrier. Now to begin our test fit we'll simply slide the bike rack shank into the hitch, line up the hitch pin hole and install our anti rattle bolt. This will secure it to the vehicle. At this point we'll give you a few measurements. Our ground clearance at the bike rack is 16 inches and from the closest point of the bike rack to the back of the vehicle is 6 inches. Now we'll go ahead and pull the hitch switch on the bottom of the bike rack to tilt the mast down.

Thule T2 Platform Style Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevrolet Colorado we'll be test fitting the Thule T2 Platform Style Bike Carrier, part number TH916XTR. Now we've already gone ahead and installed our bike rack into the hitch, line up the hitch pin hole and install our anti-rattle bolt so our bike rack is secured to the vehicle. We'll now go ahead and give you a few measurements. Our ground clearance at the bike rack is 15-1/2 inches and from the closest point of the bike rack to the back of the vehicle is 4-1/2 inches. We can now go ahead and pull our platform down and attempt to open the tailgate. And as you can see, we can open the tailgate completely with this bike rack.

Thule Parkway 2 Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevrolet Colorado we'll be test fitting the Thule Parkway 2 Bike Carrier, part number TH958. Now to begin our test fit we'll simply slide the bike rack shank into the hitch, line up the hitch pin hole and install our anti-rattle bolt. With our bolt right, our bike rack is secured to the vehicle. At this point we'll give you a few measurements. Our ground clearance at the bike rack is 16 inches and from the closest point of the bike rack to the back of the vehicle is 5 inches. Now we'll go ahead and pull the pin at the bottom of the mast to tilt the mast the down.

Thule Hitching Post Pro Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevrolet Colorado we'll be test fitting part number TH934XTR the Thule Hitching Post Pro. Now to begin our test fit we'll simply slide the bike rack into the hitch, line up the hitch pin hole and install our anti-rattle bolt. That will secure our bike rack to the vehicle. We can next go ahead and pull the pin at the bottom of the bike rack mast to tilt the mass the down. With the mast down we can open our tailgate. And as you can see, we can gain full access to the cargo area opening the tailgate completely with this bike rack.

Thule Helium Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevrolet Colorado we'll be test fitting the Thule Helium Aluminum 2 Bike Carrier part number TH970XT. Now to begin our test fit we'll simply slide the bike rack shank into the hitch, line up the hitch pin hole and then install the attached hitch pin. We can then give the bike rack a slight tug and tighten down our anti-rattle knob on the back of the bike rack. This will secure it to the vehicle. Now we'll go ahead and pull the hitch switch on the bottom of the mast to tilt the bike rack down. We can then open our tailgate.

Thule Doubletrack Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevy Colorado we'll be test fitting part number TH990XT the Thule Doubletrack Platform Style 4 Bike Carrier. Now to begin our test fit we'll install the bike rack shank into the hitch, line up the hitch pin hole and install our anti-rattle bolt. With our bolt tight our bike rack is secured to the vehicle. Now we'll give you a few measurements. And with our platform in the stored position our bike rack ground clearance is 15 inches and from the closest point of the bike rack to the back of the vehicle is 8 inches. We'll now go ahead and fold the platform down and attempt to open the tailgate.

Thule Apex 4 Swing Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevrolet Colorado we'll be test fitting the Thule Apex Swing 4 Bike Carrier, part number TH9027. Now to begin our test fit we'll simply slide the bike rack shank into the hitch, we'll slide our integrated locking hitch pin over and as we slide the shank into the hitch the pin will latch into place in the hitch pin hole. After giving it a slight tug we'll tighten down our anti-rattle knob securing the bike rack it to the vehicle. And now we can go ahead and give you a few measurements. Our ground clearance at the bike rack is 17-1/2 inches and from the anti-rattle knob to the bumper is 3-1/2 inches. We'll now go ahead and pull the hitch switch at the top of the bike rack to bring out our dual arms.

Thule Apex 4 Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevrolet Colorado we'll be test fitting part number TH9025 the Thule Apex 4 Bike Carrier. Now to begin our test fit we'll simply slide the bike rack shank into the hitch, we'll pull the integrated locking hitch pin on the bike rack and slide the shank the rest of the way in. The locking hitch pin will slide into the hitch pin hole when it reaches that point. After giving the bike rack a slight tug we'll go ahead and tighten down the anti-rattle knob on the back of the bike rack securing it to our vehicle. Now we can go ahead and pull the hitch switch at the bottom of the bike rack mast and open our tailgate. And as you can see, we can gain full access opening the tailgate completely with this bike rack.

Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevrolet Colorado we'll be test fitting the Swagman XTC2, part number S64670. Now to begin our test fit we'll simply slide the bike rack shank into the hitch, line up the hitch pin hole and install our anti-rattle bolt. With our bolt tight our bike rack is secured to the vehicle. At this point we can give you a few measurements. At our bike rack our ground clearance is 19 inches and from closest point of the bike rack to the back of the vehicle is 9 inches. Now go ahead and fold the platform down and open our tailgate.

Swagman Titan Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevy Colorado we'll be test fitting part number S63410 the Swagman Titan 4 Bike Carrier. Now to begin our test fit we'll simply slide the bike rack shank into the hitch, line up the hitch pin hole and secure our anti-rattle bolt. With our bolt tight our bike rack is secured to the vehicle. Next we'll pull the hitch switch at the bottom of the bike rack to tilt the mast down. We can then attempt to open our tailgate. And as you can see, we can open the tailgate completely with this bike rack.

SportRack Escape 3 Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevrolet Colorado we'll be test fitting the SportRack Escape 3 Bike Rack, part number A30403. Now to begin our test fit we'll slide the bike rack shank into the hitch, line up the hitch pin hole and install our anti-rattle bolt. And with our bolt tight our bike rack is secured to the vehicle. At this point we can give you a few measurements. Our ground clearance at the bike rack is 16 inches and from the bike rack mast to the back of the vehicle is 9-1/2 inches. We'll now go ahead and pull the pin at the bottom of the mast to allow the mast to tilt down and we'll open our tailgate.

Pro Series Q-Slot Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevrolet Colorado we'll be test fitting the Pro Series Q-Slot Platform Style Bike Carrier, part number PS63134. Now to begin our test fit we'll simply slide the bike rack shank into the hitch, line up the hitch pin hole and install our hitch pin. And that will secure our bike rack to the vehicle. Well now go ahead and fold the fold the platform down and open our tailgate. And as you can see, we can gain full access opening the tailgate completely with this bike rack. We're now almost ready to load our bike.

Kuat Sherpa Hitch Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevrolet Colorado we'll be test fitting the Kuat Aluminum Hitch Mounted 2 Bike Carrier, part number S102. This is the Sherpa by Kuat. To begin our test fit we'll simply slide the bike rack shank into the hitch, line up the hitch pin hole and install our locking hitch pin. With our lock on the other side of the hitch pin we'll give the bike rack a slight tug and tighten down our anti-rattle knob here on the back of the bike rack. And that will secure our bike rack to the vehicle. Now we can go ahead give you a few measurements.

Yakima FrontLoader Roof Bike Rack Review - 2012 Chevrolet Colorado

Today on our this 2012 Chevrolet Colorado we are going to be testing the Yakama front loader roof mounted bike carrier for part number y02103. To mount this bike area up on top of our vehicle we are going to set it on top of the front crossbars. Well the hand know on the front of the bike rack to tightened down the front clamp around the cross bar. In the rear, we are going to use the wing nut, T-Bolt and clamp to secure the rear half of the bike rack around our rear bar. With both clamps secure, our bike rack is mounted and we are ready to load up. To load our bike rack the first thing we need to do is open up the front wheel hoop all the way.

RockyMounts PitchFork Roof Bike Rack Review - 2012 Chevrolet Colorado

Today on this 2012 Chevrolet Colorado we're going to be test fitting the RockyMounts Pitch Fork Roof Mounted Bike Carrier, part number RKY0438. We've already got our carrier assembled according to the instructions and now we're ready to fit it up on top of our roof rack. To mount the bike carrier we'll set it up on top of our crossbars. We'll fit the front clamp around our front crossbar and use the included Allen wrench to tighten it down. In the rear, we'll fit the black clamp around our rear crossbar and use the wing nut to tighten it down. Once we have the bike rack secured, we can reinstall our skewer and head cover and then we'll move to the back and undo our wheel strap.

Thule Truck Bed-Rider Bike Rack Review - 2012 Chevrolet Colorado

Today on our 2012 Chevy Colorado we'll be test fitting part number TH822XT the Thule Bed-Rider Locking Aluminum 2 Bike Carrier. To begin our test fit we'll simply set the bed-rider into the bed making sure the bed rail clamps are even on both the left and the right. We can then clamp it down using the clamp on the passenger's side to lock it into place. With it locked in place our bed-rider's ready to be loaded. To load it we'll simply make sure that the skewer is opened up and ready for our front fork on our bike. We can then place the fork of the bike into the skewer and clamp it down.