Top 20 Most Popular 2012 Kia Sorento Bike Rackschange vehicle

Kuat Sherpa Hitch Bike Rack Review - 2012 Kia Sorento

Thule Apex 4 Hitch Bike Rack Review - 2012 Kia Sorento

Today on our 2012 Kia Sorento well be test fitting part number TH9025, the Thule Apex four bike carrier. To begin our test fit well slide the bike rack shank into the hitch and allow the integrated locking hitch pin to fall into place. We can then move to the anti-rattle knob where well tighten it down, securing our bike rack tot eh vehicle. Well now go ahead and give you a few clearance measurements. Our ground clearance at the back of the bike rack measures 11 inches, and from the closest part of the bike rack at the anti-rattle knob to the closest part of the vehicle measure one and three quarter inches. Well now check for rear vehicle access.

Thule Vertex 4 Hitch Bike Rack Review - 2012 Kia Sorento

Today on our 2012 Kia Sorento will be test fitting the Thule Vertex 4 Hitch Mounted Bike Carrier, part number TH9029. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll add up our hitch pinholes, thread our anti-rattle bolt, and tighten it down using a wrench. Next, we'll go over a handful of clearance measurements. We've got about 10-1/2 inches of ground clearance and 2-1/2 inches of clearance between the closest part of the carrier and the closest part of the bumper. Overall, we've added about 13 inches of length to the rear of our vehicle with the carrier arms folded down.

Pro Series Eclipse 4 Hitch Bike Rack Review - 2012 Kia Sorento

Today on our 2012 KIA Sorrento well be test fitting the Pro Series Eclipse four hitch mounted bike carrier, part number 63124. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin holes, thread in our anti-rattle bolt and tighten it down using a wrench. Next well go over a handful of clearance measurements. Weve got about 10 inches of ground clearance and 4 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall weve added about 31 inches of length to the rear of the vehicle.

Yakima HighLite 2 Hitch Bike Rack Review - 2012 Kia Sorento

Today on our 2012 Kia Sorento, we'll be test fitting the Yakima Highlite aluminum-tube bike carrier, part number Y02438. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll line up our hitch pinholes, and secure the bike rack with the safety pin. Then, we'll use the hand knob at the base of the rack to tighten the anti-rattle wedge inside the receiver tube. Next, we'll go over a handful of clearance measurements. We've got about 10 inches of ground clearance, and about 3-1/2 inches of clearance between the closest part of the carrier and the closest part of the vehicle.

Yakima DoubleDown Ace Hitch Bike Rack Review - 2012 Kia Sorento

Today on our 2012 Kia Sorento, we'll be test fitting the Yakima Doubledown Ace IV, part number Y02451. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll line up the pinhole, and secure our bike rack with the safety pin. Then, we'll use the hand knob at the base of the rack to tighten up the anti-rattle wedge inside the receiver tube. Now, we'll go over a handful of clearance measurements. We've got about 10 inches of ground clearance, and about 4-1/2 inches of clearance between the closest part of the carrier and the closest part of our bumper.

Thule Parkway 2 Hitch Bike Rack Review - 2012 Kia Sorento

Today on our 2012 Kia Sorento, we'll be test fitting the Thule Parkway 2 Hitch Mounted Bike Carrier, part number TH958. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll line up our hitch pin hole, thread in our anti-rattle bolt, and tighten it down with a wrench. Next, we'll go over a handful of clearance measurements. We've got about 10-1/2 inches of ground clearance and 1 inch of clearance between the closest part of the carrier and the closest part of the vehicle. Overall, we've added about 21 inches of length to the rear of the vehicle.

Thule Hitching Post Pro Hitch Bike Rack Review - 2012 Kia Sorento

Today on our 2012 Kia Sorento, we'll be test fitting the Thule Hitching Post Pro, part number TH934XTR. To mount the Hitching Post Pro to our vehicle, we'll insert the shank of the carrier into the receiver tube of our hitch. We'll line up the hitch pinholes, thread in our anti-rattle bolt, and tighten it down using a wrench. Next, we'll go over a handful of clearance measurements. We've got about 10-1/2 inches of ground clearance, and 6 inches of clearance between the closest part of the bumper and the closest part of the bike carrier. Overall, we've added about 15 inches of length to the rear of the vehicle, with the carrier's arms folded down.

Swagman XTC2 Wheel Mount Hitch Bike Rack Review - 2012 Kia Sorento

Today on our 2012 Kia Sorento, we'll be test fitting the Swagman XTC II hitch mounted bike carrier, part number S64670. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll line up our hitch pinhole, thread in our anti-rattle bolt, and tighten it down with a wrench. Next, we'll go over a handful of clearance measurements. We've got about 11 inches of ground clearance, and about 4 inches of clearance between the closest part of the bumper and the closest part of the carrier. Overall, we've added about 20 inches of length to the rear of our vehicle.

Swagman Titan Hitch Bike Rack Review - 2012 Kia Sorento

Today on our 2012 Kia Sorento, we'll be test fitting the Swagman Titan IV hitch mounted bike carrier, part number S63410. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll line up our hitch pinhole, thread in our anti-rattle bolt, and tighten it down with a wrench. Next, we'll go over a hand full of clearance measurements. We've got about 11 inches of ground clearance, and about 7 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall, we've added about 21 inches of length to the vehicle, with the carrier arms folded down.

SportRack EZ Hitch Bike Rack Review - 2012 Kia Sorento

Today on our 2012 Kia Sorento, we'll be test fitting the Sport Rack II hitch mounted bike carrier, part number A30901. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll line up our hitch pinhole, thread in our anti-rattle bolt, and tighten it down using a wrench. Next, we'll go over a handful of clearance measurements. We've got about 11-1/2 inches of ground clearance, and about 7 inches of clearance between the closest part of the vehicle and the closest part of the carrier. Overall, we've added about 27 inches of length to the rear of our vehicle.

SportRack Escape 3 Hitch Bike Rack Review - 2012 Kia Sorento

Today on our 2012 Kia Sorrento well be test fitting the Sportrack Escape 3 hitch mounted bike carrier, part number A30403. To mount our carrier to the vehicle well insert the shank of the carrier into the receiver tube of the hitch. Well line up our hitch pin hole, thread in our anti-rattle bolt and tighten it down using a wrench. Now well go over a handful of clearance measurements. Weve got about 10 inches of ground clearance and about 6 inches of clearance between the closest part of the carrier and the closest part of the vehicle. Overall weve added about 14 inches of length to the rear of the vehicle with the carriers arms folded down.

Rhode Gear Highway Hitch Bike Rack Review - 2012 Kia Sorento

Today we have a 2012 Kia Sorento and were going to test fit the Rhode Gear Highway 2 Bike Carrier for 11/4 inch and 2 inch hitches, part number RG8015220. First were going to insert the rack into our receiver and line up the bolt holes. We have a 2 inch hitch on our Kia Sorento so we will be keeping the 2 inch adaptor thats installed on our Rhode Gear rack. Next well take the threaded hitch pin and feed it through our pin hole on our receiver and thread it into the bike rack. Then we will tighten it down using either the included range or a 31/4 inch range. We will secure the pin on the other side with our clamp.

Thule T2 Platform Style Hitch Bike Rack Review - 2012 Kia Sorento

Today on this 2012 on this Kia Sorento, were going to do a test fit of part number th916xtr from Thule. This is Thules t2 platform bike rack. This bike rack will fit only 2 inch receiver hitches as shown here. Well install it in the hitch and line up the hitch pin holes and then install the anti rattle bolt. Now it does come with a tool to tighten down the bolt, however a 3 inch wrench works just as well. Going to install a lock on the other side, next well give you some measurements.