Convert-A-Ball Pintle Hook Combo with 3 Stainless Steel Balls - Bolt On - 10,000 lbs

Convert-A-Ball Ball Mounts - ph1

Strength, versatility and Convert-A-Ball quality combine in this bolt-on pintle hitch/ball mount combo. It includes 3 interchangeable, nickel-plated hitch balls (GTW is 3,500 lbs to 10,000 lbs) and a pintle sleeve adapter (GTW is 10,000 lbs).

Features:

• Offers towing convenience and versatility
  • Converts quickly and easily from pintle to standard ball mount - no tools needed
• Equipped with a double-engagement, rust-resistant locking system to secure lunette ring
• Bolts to standard pintle mounts, Convert-A-Ball cushioned mounts and reinforced bumpers on utility trucks
• Includes 3 interchangeable hitch balls, 1 pintle sleeve and mounting hardware
• Manufactured with stainless steel trailer hitch balls, shank and pintle sleeve on a black powder coated steel base
• Made in USA

Specs:

• Pintle hitch
  • Works with lunette rings that have:
    • Inner diameter: 3"
    • Maximum outer diameter: 6-3/8"
    • Maximum ring cross section: 1-5/8"
  • Towing capacity: 25,000 lbs
  • Tongue weight capacity: 5,000 lbs
• Ball hitch
  • Ball shank diameter: 1"
  • Ball sizes: 1-7/8", 2" and 2-5/16"
  • Towing capacity for 2" and 2-5/16" hitch balls: 10,000 lbs
  • Towing capacity for 1-7/8" hitch ball: 3,500 lbs
  • Tongue weight capacity: 5,000 lbs
• 2-Year limited warranty

To use the unit as a pintle hitch, simply slip the stainless steel pintle sleeve over the 1" diameter hitch ball shank. Once in place, the sleeve accepts the lunette ring on the trailer, and the handle comes over and locks in place to create a strong, reliable pintle hitch with a towing capacity of 25,000 lbs. Backed up by the security of a double-locking system, this pintle hook combo offers safety, versatility and performance for those towing with a lunette ring.

To use the unit as a ball hitch, simply slip any size Convert-A-Ball stainless steel hitch ball onto the ball shank after the pintle sleeve has been removed. As a ball hitch, the PH1 maintains its strong performance, with a towing capacity up to 10,000 lbs.

Step by Step

To Install Pintle Sleeve:
First, remove manual safety pin. Next, pull out silver knob on lower, left-hand side of unit while lifting up on handle - this will disengage the pintle lock. Place the pintle sleeve over the ball shank. Now that both locks have been unlatched, you can rotate handle to a position directly above the pintle sleeve. Release silver knob, and handle's spring-loaded lock will snap down on sleeve, automatically engaging. Re-insert safety pin for extra security, and you're set to go.

To Remove Pintle Sleeve:
Remove safety pin, pull out silver knob and lift pintle handle while rotating it 90 degrees to the side. The handle will automatically snap into place in "self-parked" position. Last, remove sleeve and re-insert safety pin.

To Install Hitch Ball:
Remove the manual safety pin, move pintle handle to "self-park" position and double-check that it is fully engaged. Note: Do not try to latch the handle when using a ball coupler because this will interfere with and possibly damage the ball mount and coupler.

After re-installing safety pin, choose appropriate ball size. Locate dimple on ball's side and push integrated pin completely through ball. Place ball on ball mount shank, line up pin with shank hole, and push pin back through. Coupler will completely cover ball during travel, ensuring that pin cannot work loose. To remove, simply reverse the process.
This Convert-A-Ball pintle hook combo is certified V-5 by the THMA and meets SAE standard J-847.

PH-1 Convert-A-Ball Pintle-Hitch, 3 Ball Combo - Stainless Steel - Bolt-On - 3,500 to 10,000 lbs GTW

Customers Who Purchased This Ball Mounts Also Bought...

E-Track Tie-Off Ring, 4K $4.95

E-Track Plastic End Cap $3.19

Convert-A-Ball Cushioned, Adjustable Pintle Mounting Bar for 2" Hitches - 8 Holes - 10,000 lbs $76.95

E-Track Trailer Cargo Control - Horizontal - 5 Foot Long $13.95

Trailer Hitch Receiver Lock - Padlock Style for Class III, IV and V Trailer Hitch Receiver $12.95

Ask the Experts about this Convert-A-Ball Ball Mounts
Do you have a question about this Ball Mounts?

• What are the Dimensions of the Convert-A-Ball Pintle Hook Combo # PH1
  
• The left to right mounting holes on Convert-A-Ball Pintle Hook Combo, # PH1, are 3.375 inches apart, center to center. Top to bottom they are 1-3/4 inches apart center to center. From the bottom of the bottom mounting hole to the bottom most part of the assembly is 2-7/8 inches. From the top, back of the mounting plate downward to the bottom corner of the front it measures 7-1/2 inches (diagonally). The mounting plate is 4 inches tall by 5 inches wide. From the top of the loop to the bottom o
  view full answer...