Valley Trailer Hitch Receiver - Custom Fit - Class III - 2"

Valley Trailer Hitch - V81310

Superior engineering and precision testing combine to form a strong, durable vehicle trailer hitch receiver. Unique a-coat provides greater coverage and corrosion protection than a traditional e-coat base.

Features:

• Custom fit is designed specifically for your vehicle
• Superior engineering includes hands-on and computer-aided design
  • Prototypes are rigorously tested to SAE and Valley in-house standards
  • Precision laser analysis ensures the best fit and craftsmanship
• Fully welded steel provides strength and durability
• Easy, bolt-on installation - no welding required
  • Complete hardware kit and installation instructions included
• Lifetime technical support from the experts at etrailer.com
• Environmentally friendly a-coat base and powder coat finish resist rust
  • Advanced technique and composition offer superior coverage and protection even inside the hitch
• Stylish, round-tube design
• Ball mount, pin and clip sold separately
• Made in USA

Specs:

• Receiver opening: 2" x 2"
• Rating: Class III
  • Maximum gross trailer weight: 3,500 lbs
    • Maximum GTW when used with weight distribution: 4,000 lbs
  • Maximum tongue weight: 350 lbs
    • Maximum TW when used with weight distribution: 400 lbs
• Limited lifetime warranty

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

V81310 Valley Class III Trailer Hitch Receiver

Video of Valley Trailer Hitch Receiver - Custom Fit - Class III - 2"

Customers Who Purchased This Trailer Hitch Also Bought...

Ask the Experts about this Valley Trailer Hitch
Do you have a question about this Trailer Hitch?

• Trailer Hitch for a 2007 Toyota Highlander Towing a Boat
  
• All trailer hitches that we carry for a 2007 Toyota Highlander are Class III. I would recommend item number V81310, the Valley 2 inch hitch. This hitch will more than adequately suit your needs to pull your sailboat. I would recommend wiring harness 118413 to use with the hitch.
  view full answer...


• Which Ball Mount is Right for a 2007 Lexus RX350 Towing a Trailer With a 12 Inch Coupler Height
  
• The Valley hitch # V81310 will sit right below the bumper on your 2007 Lexus RX350, so your 17 inch measurement from the underside of the bumper to the ground should be pretty close to the installed hitch height. If you look at the images for the Draw-Tite hitch model # 75153, which is similar in design, you can see some images that show how the hitch would look installed. If you are measuring to the bottom, flat part of your coupler and are getting 12 inches, then yes, a 4 inch ballmoun
  view full answer...


• General Towing Information for a 2004 Toyota Highlander V6
  
• A VIN is not required, just the year, make and model of a vehicle. Sometimes certain configurations need to be stated such as Hybrid engine, 4WD or sport packages. On some vehicles, spare tires need to be removed. The Valley hitch, part # V81310 does not require removal of the spare tire and yes it can still be accessed. The trailer wiring harness for tow package 2004 Highlanders is part # 118248. The port for the tow package vehicles is located behind the driver side cargo access panel an
  view full answer...


• Recommended Receiver Hitch for 2007 Toyota Highlander Sport Non-Hybrid
  
• We currently offer four different hitches available for a 2007 Toyota Highlander Sport. The Curt Class III part # 13530, Valley # V81310, Hidden Hitch # 70778 and Draw-Tite # 75153 would all be good choices. They all offer a similar design and all have the same weight capacities. In this instance, I would prefer the Curt model, due to the high gloss finish Curt uses, and also due to the fact that for your vehicle, the Curt is the more reasonably priced choice. I have confirmed with Cu
  view full answer...


• Trailer Wiring # 119176KIT Recommendation for a 2006 Toyota Highlander Hybrid
  
• For a wiring harness on your 2006 Toyota Highlander Hybrid I would recommend you get a Tow Ready Wiring Harness # 119176KIT. This wiring kit is designed to work specifically on Highlander hybrid models and would work well for you. I attached installation instructions for you to check out as well as an installation video of this product on a vehicle.
  view full answer...


• Trailer Hitch Recommendation for a 2007 Toyota Highlander Hybrid
  
• For your 2007 Toyota Highlander Hybrid, I recommend the Hidden Hitch Trailer Hitch # 70778. This is a Class III trailer hitch with a 2 inch receiver rated for 300 pounds tongue weight and 3,500 pounds gross trailer weight. I have included a link to the installation instructions and a link to a video showing a typical installation for you. If you plan on doing some towing I also recommend the etrailer Ball Mount Kit, # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a
  view full answer...