Class V Ball Mount1-1/2" Rise or 3" Drop for Trailer Hitches with 2-1/2" Opening

Valley Ball Mounts - V76922

Valley Power Pull Xtreme Trailer Hitch Ball Mount for Class V Hitches with 2-1/2" x 2-1/2" Receiver Opening

• Measures 9" from center of hitch pin hole to center of ball hole
• 2-1/2" x 2-1/2" square shank that slides into a trailer hitch with a 2-1/2" x 2-1/2" opening
• 3" drop
• 1-1/2" rise
• Uses hitch ball with 1-1/4" hole
• Rated for 12,000 lbs gross trailer weight; 1,200 lbs tongue weight

Customers Who Purchased This Ball Mounts Also Bought...

Titan Trailer Hitch Pin and Clip for 2-1/2" Trailer Hitches $7.49

Hitch Ball with 2" Diameter and Medium Shank, 10,000 lbs GTW - Chrome $15.95

Sealed, Thin Line LED Trailer Clearance, Side Marker Light, 6 Diode - Amber $9.50

Sealed, Thin Line LED Trailer Clearance, Side Marker Light, 6 Diode - Red $9.50

Rectangular LED Trailer Clearance, Side Marker Light, 4 Diode - Amber $10.95

Ask the Experts about this Valley Ball Mounts
Do you have a question about this Ball Mounts?

• Will the # V76922 Ball Mount fit in the Receiver on a 2011 F350 with a Factory 2-1/2 inch Hitch
  
• Yes, the Class V Ball Mount, item # V76922, for trailer hitches with a 2-1/2 inch opening should fit nicely in the receiver of on your 2011 F350 with a factory installed 2-1/2 hitch. This ball mount requires an appropriately sized hitch ball with a 1-1/4 inch shank. If your trailer has a 2 inch coupler you can use the Curt Ball, item # A-90, and if your trailer has a 2-5/16 inch hitch ball you can use the Tow Ready Ball, item # 19286. I recommend the DeadBolt Locks Trailer Hitch Receiver L
  view full answer...