The Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier is a rugged yet affordable hitch mounted cargo carrier with a great look and great price. The carrier simply slides into existing 1-1/4" (Class II only) or 2" receiver hitches and makes loading and unloading your gear easy and convenient as it's done at lower height. Having the carrier in the back of the vehicle is also more fuel efficient than a roof mounted carrier. With its tilt-down design, you can easily access the back of your vehicle in seconds. The carrier includes a lock to secure the items inside it. Included is a license plate light with holder and pre-wired taillights with a standard four-pin trailer connector ready to plug in and go. Carries up to 13 cu. ft. and 150 lbs. A plug/valve in the bottom of the cargo carrier makes clean up quick and easy.
Features:
Mounts to existing trailer hitch
Carrier can tilt down to give more access to the rear of the vehicle
Lid locks in the open position for easy loading and unloading
Includes pre-wired taillights with standard four-pole flat connector ready to plug in and go
License plate holder with light is included
Cargo can be locked inside of cargo box - lock included
One Key Locking System in place for cargo box allows you to match locks with other Thule racks
(1) Lock Cylinder required to lock gear in carrier
Hitch lock (# THSTL2) sold separately
Solid, ABS construction is built to withstand rough conditions associated with travel
Plug/valve makes clean-up easy
Lifetime limited warranty
Made in the USA
Specs:
Works with 1-1/4" (Class II only) and 2" trailer hitch receivers
Cargo box dimensions: 50.5" x 25.5" x 24"
Inside dimensions: 48-1/2" long x 23-1/3" high x 24-1/2" wide
Holds 13 cubic feet
Weight Capacity: 150 lbs
Measures 7-1/2" from the center of the hitch pin hole to the back of the pivot point upright bar
Please Note: Due to the size of this item it ships via truck freight. Additional fees apply. From the drop down list above, please select if the item will be shipped to a residential or business address. Item ships to the contiguous 48 states only.
Video Transcript for Thule Enclosed Hitch Mounted Cargo Carrier Review
Today we are going to be showing you part number 665C from Thule. This is their transporting and tilting enclosed cargo carrier. It slides into an inch and a quarter hitch, class 2, receiver or a 2 inch hitch which due to its lower height makes loading much easier. It has a tilt down design which makes gaining access to the rear of the vehicle that much easier. It also includes a lock for extra security. Now it also has an optional light and holder for a licensee plate for those long trips down the road which requires you to punch holes in the front of the cargo carrier. This carrier has 13 cubic feet of carrying space and has a weight capacity of 150 pounds. There is also a plug on the bottom of the carrier which makes cleaning a cinch.
Now we will demonstrate how this carrier works and show you some of the finer features we have just mentioned. We will start off with the front side of the carrier and work our way back. Now right now you cannot open this carrier as it is locked. Which is like we mentioned before for added security. Now you just need the key that comes with the carrier. Place it in the lock and turn and the carrier opens. If you look in the cargo carrier here you can see how spacious it really is. Also there is the plug valve here which actually makes cleaning a cinch. Moving further down from that you have the 2 tail light assemblies which do connect to a 4 pole connector. Also right underneath the lock you can see these 3 divots here that actually provide the set up point for your license plate holder. Moving on to the back of the cargo carrier. We will show you, this is the 4 pole connector. That will actually feed power to the tail light assemblies on the back of the carrier. You simply plug it in it to the 4 pole flat in your vehicle and it should run just fine.
To do that you probably want to actually wrap this around a couple times just to get it better secure. And then, the carrier comes equipped with a zip tie to tie this down. Then you just simply plug it into your 4 pole flat. Next is probably the most important function of this cargo carrier is the actual tilting function. If you look back here there is actually a pin you have to pull and then you can gentle let it down to gain more access to the rear of your vehicle. Pull it out and now you have more access to the rear of your vehicle. Now we are going to show you some of the tail light functions of this. To operate these lights you simply turn on the power to your lights. Then you can see it comes on. They also have a left turn, as well as a right turn. They also have a brake function. And just about anything that your car can do, these tail lights will do. There you have it for part number 665C from Thule, the transporter and tilting cargo carrier.
Customers Who Purchased This Hitch Cargo Carrier Also Bought...
Easy to access, convenient I bought this a couple of years ago to free up space in our SUVs while traveling and tailgating. I love it and constantly get questions about it from other people. It is easy to access, locks, keeps things dry and protected. Because of the dimensions, I do recommend packing things in duffel bags rather than hard suitcases, and you'll be able to get a lot more in it. It does not interfere with you view or driving. In fact, you may forget it is attached. The only disadvantage of this model (compared to the Terrapin) is that it can be difficult to tilt and get back if it is fully loaded and you need access to the tailgate.3400
Terrible Good! I bought one of these back in 2003. I've used it on my Saab wagon, T&C van and Mazda5. It is great for long trips. We just throw in the cargo we plan to use at the motel stops, and store most other destination baggage in the car or van. Great additional space for a travelling family of 5. I store it by hoisting it to the garage ceiling.2192
Lives up to the Thule name Actual carrier lacked description for installation, but it seemed pretty straightforward. Completed and ready for a trip. Don't trust what the dealer says about the wiring hookup. Mine told me it wasn't there so I purchased the extra wiring kit. After following the instructions for some time, I discovered the factory installed harness underneath the vehicle to the left of receiver. Thankfully, etrailer is taking back the kit as I don't need it. 2096
Extremely Happy The amount of storage capacity, and ease of use with this product is outstanding. Having this has enabled us to use the back of our SUV for the dogs and we have never run out of space yet. Easy to assemble, easy to use, kept our luggage dry in a snow storm, we are very happy we purchased this. We would however suggest getting the locking thule hitch pin, the bolt that comes with it works but you can't lock it and prevent theft of the whole unit without the lock.809
Ask the Experts about this Thule Hitch Cargo Carrier
2 inch hitches are not available for the Mazda 5. The only hitches available for Mazda 5 are Class 1 1-1/4 inch hitches. Class 1 and 2 hitches are both 1-1/4 inch in size, but the hitch pin hole location prevents Class 2 accessories from being used on Class 1 hitches. There are Thule Transporter boxes available for 1-1/4 inch Class 2 hitches, so I am not sure how people are using them on the Class 1 hitches without modifying the carrier, which will void the carrier manufacturer warranty and is a view full answer...
I have spoken with our contacts at Thule. Without knowing the make and model of the vehicle, they could not provide anything specific. The carrier tilts down at an approximate 45 degree angle away from the vehicle. The folks at Thule tell me that the only vehicles that could present a clearance problem are those whose tailgates open to the side. If your vehicle has a liftgate that is hinged at the top, you should have no problems clearing the carrier when it is in its tilted position. view full answer...
The Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier # TH665C will fit 2 inch hitches. It can fit 1-1/4 hitches but the hitch must be a Class II hitch. Class II hitches can carry more weight than Class I hitches.
According to Thule the carrier tilts down at an approximate 45 degree angle away from the vehicle. The folks at Thule tell me that the only vehicles that could present a clearance problem are those whose tailgates open to the side. If your vehicle has a liftgate that is view full answer...
Yes the Thule Snug Tite Hitch Lock, part #THSTL2, is compatible with the Thule Transporter TH665C. Not only do we have the lock listed as an item bought by other customers, but on the right hand side of the page we have it listed as a related product meaning it is meant to be used along with the item you are looking at.
I have included a link below to the THSTL2 as well as a video demo of the Transporter to give you a brief example of how the carrier works. view full answer...
The adapting piece on the shank of the Thule Transporter Enclosed Cargo Carrier, part # TH665C is a sleeve that slides over the shank. This adapting piece does not increase the length of the shank, and would not place the Carrier further away from the vehicle.
The photos in the product description shows the Transporter installed on a Nissan Pathfinder with a 2 inch receiver, a similar sized vehicle to yours. view full answer...
To know if the Thule Transporter Cargo Carrier, # TH665C, will work on your 2010 Toyota RAV4 you will need to check your owners manual or the car dealer to find out what class of hitch you have and what the weight capacity is on the hitch and on your vehicle.
The Thule Cargo Carrier only works on a 1-1/4 Inch Class II or 2 inch Class III trailer hitch. If you have the Class II or Class III hitch with the right capacity on your Toyota, then you can take some measurements to see if it will cle view full answer...
The Thule Transporter Enclosed Cargo Carrier, part # TH665C does not have an adapter such as you describe. We offer the Curt Multi-Purpose Ball Mount, part # D210 that provides a receiver for mounting the cargo carrier along with a ball mount for towing the trailer. The Ball Mount receiver has a 350 lb tongue weight capacity, which means that the cargo carrier, its contents and the tongue weight of the trailer can weigh no more than 500 lbs.
You will want to confirm that the vehicle being u view full answer...
The Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier, # TH665C, will fit on your Dodge Dakota if it has at least a Class II hitch. You will need to check the tongue weight capacity of your hitch and the capacities of the truck in your owners manual.
If you do have a Class II or higher hitch, then the 150 pounds capacity plus 70 pounds of the carrier will equal 220 pounds. A Class II hitch can typically handle 300 to 350 pounds of tongue weight capacity; more than enough for this view full answer...
The Thule Transporter Hitch Mounted Cargo Carrier may fit your Wrangler, but you will need to do some measuring.
The cargo carrier measures about 7 inches from the hitch pin hole to the carrier. Take a dowel rod or yard stick and lay it against your spare. Measure from the center of the hitch pin hole out to the stick and if the measurement is less that 7 inches, it should fit.
If you are close to that measurement, write back and let me know what it is and I will see if I can find a soluti view full answer...
We have not yet had a chance to test the Thule Transport Combi Cargo Carrier, item # TH665C, on a 2001 Mazda MPV DX, so I cannot say for sure if it will provide enough clearance. Thule was very thorough in making the design as universal as possible. It extends 7-1/2 inches from the center of the hitch pin hole to the back of the pivot point upright bar and tilts down at a 45 degree angle. When tilted down it should provide enough clearance to open the rear hatch. Again since we have not had the view full answer...
First, the Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier, # TH665C, extends out 7 inches from the center of the hitch pin hole, so unless the spare tire is removed from the back of the RV, it will not clear the tire.
The standard hitch pin hole size for a 2 inch receiver (Class III or higher) is 5/8 inch diameter. For a 1-1/4 inch receiver (Class II and lower) it is 1/2 inch diameter. Since this cargo carrier can be used in either size, it uses a 1/2 inch design but it also ha view full answer...
The Thule Transporter Enclosed Tilting Cargo Carrier, part # TH665C offers 7-1/2 inches of clearance from the hitch pin hole to the closest portion of the carrier. The Rola Tilting Cargo Carrier, part # 59110 provides 12 inches of clearance. Your best bet to determine the necessary clearance would be to measure rearward from the hitch pin hole of your receiver. Then measure how far out the door extends when open.
We also offer the Rola Swinging Enclosed Cargo Carrier, part # 59109, which wil view full answer...
The Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier, # TH665C, extends from the center of the hitch pin hole 7-1/2 inches to the back of the carrier. When tilted, the carrier will tilt down at a 45 degree angle. This provides enough clearance for vehicles with a rear hatch that opens up but not enough for vehicles with a rear door that opens to the side. The Transporter does not comes with a cargo net. view full answer...
Provided that your 2010 Subaru Outback has a Class II or Class III trailer hitch, you will be able to carry the Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier, # TH665C. Thule has stated that the only vehicles that could present a clearance problem are those whose tailgates open to the side. If your vehicle has a liftgate that is hinged at the top, you should have no problems clearing the carrier when it is in its tilted position. I have included a link to a video review of this ca view full answer...
As long as you have at least a Class III 2 inch hitch on your 2008 Honda Odyssey EX-L, you will be able to use the Thule Transporter Hitch Mounted Cargo Carrier, part # TH665C.
The Thule Transporter tilts down to allow access to the hatch on your Odyssey. You will also want to measure from the center of the hitch pin hole on the vehicle out to the distance needed to clear the rear bumper. If that distance is less than 7-1/2 inches the carrier will clear the rear of the vehicle.
If you do n view full answer...
The Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier, # TH665C, has a limited lifetime warranty. basically for each Thule product, the warranty is: Subject to the limitations and exclusions described in the
warranty, THULE will remedy defects in materials or workmanship by repairing or replacing, at its option, a defective product without charge for parts or labor.
Damage that is done to the box by the user is not covered under the warranty so if you somehow broke it or modified view full answer...
In order to use the Thule enclosed cargo carrier, # TH665C, you would need to have a Class II trailer hitch on your 2001 Dodge Stratus. There is a Class II trailer hitch available, # 36301. I have included a link to the installation details and a link to a video showing a typical installation for you.
With this hitch installed you can mount the carrier, however, there will be very little clearance between the rear bumper and the back of the carrier. You will need to keep that in mind when loa view full answer...
by: Steve08/30/2010
by: John O.07/06/2009
