Trailer Hitch Receiver Mounted Tow Strap Loop

Video Transcript for Superwinch Receiver Shackle Bracket Review

Today we are going to show you part number SW2546 from Superwinch. This is their Receiver Shackle Bracket. And what this does is, it makes any receiver a tie-off point for any winching application or pulling application. You can use this in the front receiver or the back receiver. The only main thing you have to worry about is do not exceed the capacity of your receiver hitch itself. And this will fit all 2-inch receiver hitches. We will go ahead and show you the parts that come with the unit.

This is the unit itself, obviously. And it comes in three pieces. You have the part that goes into the hitch, the shackle itself and then the bolt for the shackle. You take it apart and you can install any type of winch strap onto that shackle, you can run a tow loop right across or through it, you can hook onto it. Anything you can just strap onto it or hook on, you can use it. All right, just to show you what it looks like in a typical receiver hitch. It slides right in. It uses any hitch pin you have. And it is ready for use. And there you have it for part number SW2546 from Superwinch.

Superwinch Ball Mounts Reviews