LED Submersible Trailer Stop, Turn, Tail and License Plate Light, 7-Function, 14 Diode, Left Hand

Optronics Trailer Lights - STL9RB

5-3/16" L x 4-3/4" W x 2-11/16" D; Corrosion resistant; replaceable lens; 2-stud mount on 2" centers; 3-wire; 14 LEDs

LED Trailer Stop, Turn, Tail and License Plate Light, 7-Function, 14-Diode, Left Hand

This is a multifunction LED stop, turn, and tail light. This versatile light serves seven functions: stop, turn, tail, rear reflex, side marker, side reflex, and license plate illuminator. The main red light measures 4-3/4" square x 2-11/16" deep; the attached red marker light makes the total length 5-3/16". The molded plastic housing and durable lens provide all-weather protection against corrosion. This light has 14 light-emitting diodes which draw 0.254/.112 amps at 12.8 volts. The light features a screw-down, replaceable lens. The light is a universal mount with two studs on 2" centers. The three-wire design includes the lead wires for power and a ground wire for mounting to any surface.

• Red, square trailer light serves 7 functions for trailers less than 80" wide
  • Stop, Turn, Tail, Rear Clearance, Rear Reflex, Side Marker, Side Reflex, and License Plate Illuminator
• Submersible
• Corrosion resistant
• 14 LEDs (Light Emitting Diode)
• Replaceable lens
• Stud mounts on left side of trailer with two studs on 2" centers
• Wiring design contains lead wires and a ground wire to mount to all surfaces
• Dimensions: 5-3/16" L x 4-3/4" W x 2-11/16" D
• Light draws 0.254/.112 amps at 12.8 volts

Manufacturer Specifications

Universal stud-mount stop, turn and tail lights for trailers under 80". The 8-function: stop, turn, tail, rear reflex, side marker, rear clearance and side reflex with license plate light. All weather molded plastic housing and durable lens protect against corrosion. Features screw on, replaceable lens. Mounts on 2" centers, grounds through mounting studs.

STL-9RB STL-7RS Combination LED Tail Light with License Plate Illuminator for trailers under 80" wide - Red - 14 diode 0.254V/0.112A by Optronics, Inc.

Customers Who Purchased This Trailer Lights Also Bought...

Ask the Experts about this Optronics Trailer Lights
Do you have a question about this Trailer Lights?

• Why is the Left Hand Light More Expensive than the Right Hand Light?
  
• The left hand taillight is more expensive because it contains more LED lights than the right side, due to the addition of the license plate light on the bottom of the light. The white LED is more expensive to produce also and that adds to the cost of the left hand light because the license plate lamps are white.
  view full answer...


• Left Handed, Submersible Trailer Light and License Plate Bracket Recommendation
  
• What you will need is a Over 80 inch Wide, Square Submersible Trailer Tail Light with License Plate Light, 8-Function, Left, part # ST5RB. For a license plate bracket you will need a Trailer License Plate Mount Bracket, Angled, Rust Proof Polymer - Black, part # LP10SB. If you need a right handed light, you would want a Over 80 inch Wide, Square Submersible Trailer Tail Light, 7-Function, Right Hand, part # ST4RB. The reason I recommend a different Tail Light from the one you referenced i
  view full answer...


• Troubleshooting Left Side Running Light Problem on a Boat Trailer after Installing a New Tail Light
  
• It sounds as if you either have a weak ground at the first light on the left side of the trailer that is not working or you have a broken or pinched wire on the left side after the light that is working. You have effectively eliminated the vehicle and trailer connectors by observing the fact that the first running light inline on the left side of the trailer is functioning properly and that all of the other trailer lighting is working. Start, by making sure the lights that are not working are
  view full answer...