Sidewinder Fifth Wheel Pin Box Coupler with Turret, Hardware, King pin by 5th Airborne - ST300-SW19K
Sidewinder is the premium fifth wheel pin box coupler designed specifically for short-bed pickups. Its worry-free turning design allows you to make up to 90-degree turns without exiting the truck, throwing a switch or even pushing a button!
- Features:
- Replaces existing king pin on fifth wheel trailer
- Make 90-degree turns without getting out of your truck, throwing a switch or pushing a button
- No fifth wheel slider needed
- Designed specifically for short-bed pickups
- Refer to the formula below to ensure proper clearance
- Length of Sidewinder arm: 22"
- King pin locking mechanism moves pivot position 22" rear of the truck and trailer attachment point
- Make 90-degree turns without getting out of your truck, throwing a switch or pushing a button
- No fifth wheel slider needed
- No contact between truck cab and coach
- Trailer tracks more closely to the truck for better driveability
- Full use of truck bed space
- Easy hookup or disconnect at any angle
- Faster steering wheel response, easier to reverse
- C-channel design provides more stability and strength than standard pin box design
- Able to support heavier loads
- Specs:
- Designed for use with Venture CJ13515 and CJ13517 pin boxes
- Capacity: 19,000 lbs
- 3-Year limited warranty
- Made in the USA
Clearance Formula:
Use the formula below to ensure there will be enough space between your truck cab and trailer when executing a 90-degree turn.
(A + B) - C = Clearance
A= Distance from center of fifth wheel hitch jaw to truck cab
B= Length of Sidewinder arm (19K = 22")
C= Width of trailer divided by 2 (to get half)
For example: If the distance from the center of the hitch to the cab is 36", 36" + 22" = 58". If your fifth wheel trailer is 102" wide, take half (51"), then plug in: 58" - 51" = 7" of clearance.
ST300-SW19K - Sidewinder Fifth Wheel Pin Box Coupler with Turret, Hardware, King pin by 5th Airborne
See Larger
Instructions
