Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Rating: 
6 reviews
Code: SR25219
Retail:$36.99
Price:$33.29
Shipping Weight: 1 pounds
Shipping SpecialSilence that obnoxious "clanking" noise that occurs while towing. This locking hitch pin adapts to any 2" ball mount or rack device. An insert fitted with a nut slides inside the ball mount to pull it tightly against the receiver tube.
Features:
Specs:
This hitch pin's unique design improves the towing experience by protecting the vehicle's powertrain and safely minimizing that annoying "clanking" sound. Engineered to fit 2" ball mounts, it features an anti-rattle nut enclosure that slides inside the ball mount. A 5/8" stainless steel threaded pin clinches the nut securely to the side of the receiver tube, reducing "wiggle room" between the tube and the ball mount. To prevent theft, the hitch pin includes a brass lock with a rubber dust cover to block out debris.
The insert piece fitted with a nut slides inside the ball mount or any other hitch accessory with a hollow shank. The pin clinches the nut securely to the side of the receiver tube to reduce excess slack between the tube and the ball mount.
Video of Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are going to show you part number 25219 from Softride. This is the Quiet Ride Hitch Pin and Lock. What this does is basically is an anti-rattle device for your ball mount, and it is designed for 2-inch receivers only. This pin is constructed of stainless steel and brass construction and is rated for 12,000 pounds towing capacity.
At this point we will go ahead and install it on a typical ball mount and show you how it works. The kit contains a bolt that gets screwed into the block right here, which consists of two parts itself. And then you have a lock and the keys. The bolt and this sleeve are stainless steel construction and the lock itself has brass construction. Obviously,galvanized steel and plastic components here. We will go ahead and install this inside the ball mount and then show you how it gets tightened down on a vehicle.
Once you get it aligned, bring your bolt in and out just to make sure, so you have it square. And now it is ready to be installed into the hitch. We will go ahead and install it in a typical receiver hitch here. Take the bolt and start threading it inside. Before we tighten it down you can see we have a lot of movement. We will tighten it down and see what we get then. This does use a 7/8 wrench or socket. For extra security, once you have the bolt tightened down you can go ahead and just add the lock. And there you have it for part number 25219, the Quiet Ride from Softride.
Customers Who Purchased This Locks,Hitch Accessories Also Bought...
Replacement parts available for this product
Average Customer Rating: 4.7 out of 5 stars (6 Customer Reviews)
by: Andy R.02/09/2009
Is this review helpful?
Removed rattle & all sway, Use on 2005 Chrysler with vertical hotch mount & Pin lock not removed all the rattle but controled my sway problem.Would recommend this product to anyone that pulls a trailer,or flat towes a vehicle. Thanks.1559
by: Dave D.02/03/2012
Is this review helpful?
I bought this product to keep my hitch mounted cargo carrier from moving around and to secure it so it couldn't be stolen. The carrier doesn't fit snug in the receiver so it rattles and wiggles up and down. This hitch pin threads into a nut that is held inside the hollow tube that slides into the receiver. The nut is held inside by a rubber bushing that does a good job of lining the nut up with the hole and KEEPING IT THERE! The bolt threads through the nut making everything snug (no more noise or movement) and then the lock (seems heavy duty for a hitch pin) locks on the other end.30955
by: Jon G.10/20/2011
Is this review helpful?
Great product, fit and finish. There is a trick to getting this little guy installed. Get the bolt near tight, where you still have play in the hitch. You need the play to get the silver shield on the top of the lock to enter the receiver so the lock can lock onto the pin. Once its locked onto the pin, tighten up the bolt and you are done. No wobble, nice and secure. 25871
by: Tom K10/17/2011
Is this review helpful?
Ordered the threaded hitch pin, got in less than a week with standard delivery. Not a problem.25705
by: Jay M.09/12/2011
Is this review helpful?
What I like: Depending on the hitch and receiver you use, the hitch pin may do an excellent job in controlling sway : vertical and horizontal. What I am not entirely happy about: Depending on the hitch and receiver you use, the hitch pin may do an excellent job in controlling sway on the horizontal but not as much on the vertical. Also be careful about over tightening the bold to the anti-rattle assembly. It can twist the rubber stabilizing assembly a little bit. I think that may be the reason for the lack of vertical control. The problem is, my specific pin holes are a bit deep so I can't grab the assembly to line it up correctly. Also the lock sleeve maybe a little big for the pin hole so don't completely tighten the pin so you have a little wiggle room. However it is much better improvement over the standard pin with clip.23798
by: Jeff07/26/2011
Is this review helpful?
Very well constructed! Easy to use. Absolutely no rattle at all. Great shipping time. Very Satisfied!20290
Ask the Experts about this Softride Locks,Hitch Accessories
Do you have a question about this Locks,Hitch Accessories?
