Swagman 3 Bike Carrier Ball Hole Mounted Bike Rack

Swagman Hitch Bike Racks - S64101

The simple design on this original three-bike rack offers riders basic carrier functionality. Its solid steel construction provides lasting toughness. Kraton vinyl cushioning helps protect frames and offers additional gripping power. The top plate accommodates several different frame sizes. Keep your bikes safe by adding a couple of optional padlocks. This rack attaches to a flat surface with a 3/4" diameter hole, making it great for step bumpers or trailer hitch ball mounts.

Features:

• Carries up to 3 bikes
• Solid steel construction
• Kraton vinyl cushioning helps protect frames and offers additional gripping power
• Flexible top plate accommodates several different frame sizes
• Turning knobs with top plate secure bikes to the rack
• Bikes can be locked to the rack with 2 padlocks (sold separately)

Specs:

• Holes for optional padlocks are 5/8" in diameter
• Attaches to a flat surface with a 3/4" diameter hole, making it great for step bumpers or trailer hitch ball mounts
  • If you have a 2" trailer hitch receiver, a bushing and hitch ball with a 3/4" shank are required

Each cradle contains grooved, kraton vinyl cushioning to offer additional gripping power and prevent bikes from sliding during transit.

Bike Carrier installed through a ball hole on the step bumper.

64101 Swagman Original 3-Bike Rack

Tow Ready # 63133

Customers Who Purchased This Hitch Bike Racks Also Bought...

Swagman Easy-Out Women's and Alternative Frame Bike Adapter for Hitch Bike Racks $25.20

Hitch Ball with 2" Diameter and Short Shank, 3,500 lbs GTW - Chrome $7.49

Softride Soft Velcro Tie Down for Bike Racks $1.79

Hitch Ball Bushing - 1" to 3/4" $2.49

Ask the Experts about this Swagman Hitch Bike Racks
Do you have a question about this Hitch Bike Racks?

• Bushing and Hitch Ball Required for Mounting the Ball Mount Bike Rack # S64101 on a 2 Inch Drawbar
  
• The bushing required to install the Swagman 3 Bike Ball Hole Mounted Bike Rack, item # S64101, is the Hitch Ball Bushing - 1 inch to 3/4 inch, item # 320000. Along with this bushing you will need a hitch ball with a 3/4 inch diameter shank in an appropriate size. You could select from the following balls. Hitch Ball with 1-7/8 inch Diameter and Short Shank, 2000 lbs GTW - Chrome, item # 19256 Hitch Ball with 2 inch Diameter and Short Shank, 3,500 lbs GTW - Chrome, item # 19258 With the
  view full answer...


• Measurements On The Swagman 3 Bike Carrier Ball Hole Mounted Bike Rack # S64101
  
• I went out to the warehouse and pulled the Swagman 3 Bike Carrier Ball Hole Mounted Bike Rack # S64101. I measured from the center of the ball hole on the bottom plate that mounts to the hitch ball to the upright post, and it measures 2 inches. The upright post is 2 inches in diameter. I also have a diagram of the bike rack that has measurements of the height of the upright pole (33-1/2 inches) and the overall length of the top plate (17-1/2 inches). If you use these measurements and mea
  view full answer...


• Replacement Vinyl Cradle Padding # P0023 for a Swagman 3 Bike Carrier # S64101
  
• The replacement kraton wraps that you would need for your Swagman 3 Bike Carrier Ball Hole Mounted Bike Rack, part # S64101, would be the Replacement Vinyl Cradle Padding for Swagman Original Series Bike Carriers, part # P0023.
  view full answer...


• Availability of Replacement Cradle Pad for Swagman Bike Rack
  
• If your Swagman Rack was manufactured after 1999, we do offer a replacement pad, part # P0023. Ordering that part # would give you 1 pad.
  view full answer...