See What Fits Your Vehicle
customer service | view cart  View Cart

Hitch Accessories > Anti-Rattle > Universal > Fits 2 Inch Hitch > Non-Locking > Sleeve Style > Roadmaster

RM-061Hitch Accessories RM-061Hitch Accessories RM-061Hitch Accessories RM-061Hitch Accessories RM-061

Roadmaster Quiet Hitch for 2" Trailer Hitches

Roadmaster Hitch Accessories

Rating: ratingratingratingratingrating
50 reviews


Code:   RM-061

Price:$23.95

Shipping Weight: 2 pounds

Shipping Special
Quantity: 




Roadmaster Hitch Accessories - RM-061

Ring slips over the hitch accessory shank. Tightening the bolt removes any free play between the shank of the hitch accessory and the trailer hitch.

  • U-bolt and bar design fits most 2" trailer hitches
  • Reduces vibration and rattle
  • Inside height: 2-1/2"
  • Inside width: 3-1/8"

061 Roadmaster Quiet Hitch



Video of Roadmaster Quiet Hitch for 2" Trailer Hitches


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video Review Quiet Hitch RM061
Roadmaster Quiet Hitch Anti-Rattle Device Review

Video Transcript for Roadmaster Quiet Hitch Anti-Rattle Device Review

Today we are going to review the quiet hitch anti-rattling ring from Roadmaster, part number RM-061. This anti-rattle ring works with class III 2 inch receiver hitches and bolts on in seconds. It will help eliminate the loud rattling noises that you get from the hitch connection. To install the unit, all we need to do is take the anti-rattle ring. And you will notice at the bottom we have a jam nut and a regular tightening nut on it. We can go ahead and remove the jam nuts for the time being. 0:26

And just go ahead and release the tightening nuts all of the way to the bottom of the thread. We can then take it and slide it over our hitch accessory that we are going to be using inside the trailer hitch. For this purpose we are just going to be using a regular ball mount. Slide that in there and go ahead and line up our pin and clip. And what we will want to do is take the outer ring here and we are actually going to seat it over the collar of the hitch itself. And the bottom tumbler here will tighten on to the bottom of the ball mount. 1:09

With that tightened down, it will pull the ball mount and the hitch together thus removing the rattle. You can see, with the two tightened together, the rattle is gone. Once you have it tightened on there, you can just go ahead and put the jam nuts on. It is going to prevent the tightening up from loosening up on us. Now you are ready to tow in peace and quiet. And that will conclude the review of part number RM-061, the Quiet Hitch Anti-Rattle Ring from Roadmaster.






Customers Who Purchased This Hitch Accessories Also Bought...






Customer Reviews  -  Write a review about this product

Roadmaster Quiet Hitch for 2 - RM-061

Average Customer Rating:  ratingratingratingratingrating4.9 out of 5 stars   (50 Customer Reviews)




Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Paul05/21/2011

Is this review helpful?


Well built, high quality machined bar. I use the clamp upside-down, with the nuts facting up and back, and it is much easier to get on and off. It also holds the receiver tube in its original position rather than pulling it up.14999



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Augie11/20/2011

Is this review helpful?


Arrived on time as advertised. Have not had a chance to try it yet, But it does look and feel solid and simple.27205



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: D. Rex U.03/25/2011

Is this review helpful?


Here is my setup using the items from my two orders, including the two ant-rattle devices. The pictures aren't that great of quality, since I just used my cell phone (my only camera anymore). Everything works perfectly. 10379



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: HBR05/25/2011

Is this review helpful?


Got tired of the rattles with an unloaded trailer. Put Quiet Hitch on before hauling an empty trailer 440 miles - what a difference. Couldn't use the stock Lexus/Toyota hitch, though - not enough clearence. Used an aftermarket hitch wtih the Quiet Hitch pulling down, rather than up. (See photo)15355



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Picc01/14/2011

Is this review helpful?


Won't fit class 4 hitches This unit did not fit over the flange on my Class IV hitch - it is not mentioned in the eTrailer online description but the packaging clearly states it is for use with Class III hitches - wish I had know that before purchasing.5483



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: John Groom02/05/2012

Is this review helpful?


works very well - I used it on a 2 inch extension and this was the only option. 31108



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Dave D.02/03/2012

Is this review helpful?


It shipped quickly and arrived in just a few days. I tried it out on my receiver and it fit fine. I used it to try and keep the rattling and movement of the hitch when pulling a medium size utility trailer. It worked! I no longer have to listen to the rattle and clatter while I am driving down the road. It also helped with the little amount of swaying I would get on the highway. Overall, good product.30954



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Bob L.01/25/2012

Is this review helpful?


Works as advertised - keeps the bike rack from moving all around. No more jamming wood or other things into the receiver to try and keep it still.30337



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Ryan01/21/2012

Is this review helpful?


Product as advertised, eliminates all the play up/down and left/right on the hitch bar. 30083



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Augie01/19/2012

Is this review helpful?


The product is so simple and it works as advertised. I did turn it around so it is clamping the drawbar down rather than lifting it up. It also makes it eaiser for me to reach the nuts. Also tighten both sides equally will help it from coming loose.29939



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Augie01/19/2012

Is this review helpful?


The product is so simple and it works as advertised. I did turn it around so it is clamping the drawbar down rather than lifting it up. It also makes it eaiser for me to reach the nuts. 29936



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Arnold M12/24/2011

Is this review helpful?


Had a lot of play in the reciever hitch and this product took care of the problem.28664



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Mike S.12/23/2011

Is this review helpful?


The Roadmaster Quiet Hitch worked great. It did a great job of taking the wiggle out of my Cargo Carrier.28662



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Ray12/23/2011

Is this review helpful?


Stops hitch rattle great product works as specified'28644



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: ted s.12/22/2011

Is this review helpful?


just what i have been looking for. simple design, easy to use. eliminated all movement of the ball mount. have not had a chance to road test, but don't anticipate any problem.28568



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Bob S12/05/2011

Is this review helpful?


It is simple, I like that. 27712



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Bob S.11/26/2011

Is this review helpful?


This hitch quieter does just that. Works on both my two inch bar, and a 1.25 inch bar with adaptor, with either going into a 2 inch receiver. No need for shims and the like to remove play from the bar-receiver interface. Wish I had discovered this years ago!27399



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Dalton K10/29/2011

Is this review helpful?


This item worked like advertised and was really easy to install and remove. We haul our utility trailer 2 hours each way to our property and the noise would have driven us crazy without this item. It shipped really fast as well. Great experience with etrailer.com!26318



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Mike J10/27/2011

Is this review helpful?


Excellent product for the price. Does exactly what is is suppose to do, no drilling, simply bolt it on. Very pleased with etrailer, quick shipping (same Day) and delivery. 26205



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Jimbo G09/14/2011

Is this review helpful?


Works great; had to order another one....my son 'borrowed' mine for his hitch and I'm having a hard time getting it back!23947



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: mt08/30/2011

Is this review helpful?


Seems to fit well and should work from the looks of it. Haven't been on the road yet.23218



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Bill E.08/24/2011

Is this review helpful?


A very nice part to keep the hitch from ratteling with or without a trailer attached.22700



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Tony Andis08/24/2011

Is this review helpful?


Excellent service,item exactly as described and fast shipping item arrived sooner than expected , will look at e trailer.com again if i need anything for my trailer and will recommend it to friends needing any trailer items . 22670



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Larry B.08/24/2011

Is this review helpful?


As a past, present and future customer of etrailer I can sum up my review with one word. OUTSTANDING!! Thanks etrailer and keep up the great work.22608



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Steve E.08/21/2011

Is this review helpful?


Great device! Easy to install. Removed all of the rattle and movement out of the hitch mouted cargo carrier. Perfect performance.22399



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Mark F.08/11/2011

Is this review helpful?


I was using a hitch stabilizer consisting of two threaded eye bolts that slide over the hitch receiver pin and a square bracket with rubber flange that slides over the hitch receiver but it only eliminated front to back rattle. Before buying the RM-061 Roadmaster Quiet Hitch I ruled out other more expensive and elaborate hitch stabilizers due to lack of depth of clearance of my hitch receiver. I wasn't sure if the Roadmaster Quiet Hitch would only eliminate up and down rattle but I put it on and it eliminated ALL play in my hitch receiver; front to back, left to right and up and down. I should have bought one of these a long time ago, thanks etrailer!21649



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Al F.08/05/2011

Is this review helpful?


Quiet at last, NO More Clunking from the hitch drawbar!21220



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Eric08/01/2011

Is this review helpful?


Simple to install and keeps the hitch from moving up and down. I used in conjunction with another device (locking pin with anti-rattle device) which keeps it from moving side to side also. Now my hitch is silent and does not move in any direction.20660



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Fred V07/28/2011

Is this review helpful?


Simple, secure and does not mar my hitch like the "bolt-on" stabilizers do20468



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Guy H.07/23/2011

Is this review helpful?


I was worried that the Quiet Hitch would not fit on a Class IV hitch (with a 2" receiver), but it did and holds the ball mount tight to the receiver. Simple to put on and take off. 20061



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Monique R07/20/2011

Is this review helpful?


Works Great! 19733



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Steve R.07/18/2011

Is this review helpful?


Installed very easily. Have not had a chance to road test. After installation ALL wobble with the bike rack was gone, will add further details after taking it on the road. Etrailer customer service is very good !! The item was recieved in a matter of days.19637



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Jacan06/20/2011

Is this review helpful?


I purchase a road-master high low 6'' adapter, the product is perfect, shipping was super fast, superb communication, however rattling becomes a problem, so I purchase a roadmaster quiet hitch which stop my adapter from rattling, but now my bicycle rack is rattling so I need to purchase another quiet hitch, I just wish there was an automatic recommendation for the two quiet hitch from my original purchase of the 6'' adapter. 17377



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Lonnie06/09/2011

Is this review helpful?


I found that I had to re-tighten after about three runs but now the hitch is good and tight - solid - and the trailer and truck now seems as one. Great little product.16562



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Steve A.06/07/2011

Is this review helpful?


Everything I expected. 16334



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Chris06/07/2011

Is this review helpful?


Very fast shipping and the product woks great. Thank you16240



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Mike G.05/24/2011

Is this review helpful?


Fast shipping, product works great!!!!! !!!!!!!!!!!!15228



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Jim G05/19/2011

Is this review helpful?


It works, period. Rattle, rattle, thump, thump....GONE!14800



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Great Accessory05/16/2011

Is this review helpful?


Product as described...worked great on my recent 1000 mile roadtrip...fastens securely to the hitch, removes quickly and easily, positively removed the play from my cargo carrier. Would highly recommend to others.14210



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Steve N.05/13/2011

Is this review helpful?


I have shown this product to my friends and they said they are going to get one.13874



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: t smith05/13/2011

Is this review helpful?


Nice product. East to install. No Noise. 13851



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Phat Tran05/13/2011

Is this review helpful?


Great product. Worked well and I did not hear or feel my hitch move around while travelling from Oregon to AZ. Thx13801



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: James K05/11/2011

Is this review helpful?


the roadmaster quiet hitch is a great product. I t is very simple to install and really does the job of controlling hitch wobble and noise. E trailer does a great job of meeting the customer requirements and getting great products shipped on time. 13608



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Big Jim05/11/2011

Is this review helpful?


The most cost efficient method of reducing hitch noise. Works great for my needs. 13425



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Lee05/11/2011

Is this review helpful?


Works as advertised 13421



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Thad K.03/28/2011

Is this review helpful?


I used this item in conjunction with an anti-rattle lock (part # 63232). The lock left a slight amount of up and down play in my hitch extension. After installing this quiet hitch, though, the thing feels like it's welded on. Regardless of your application, this item is an affordable addition to your towing setup. I give it top marks.10534



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Vic Wardlaw02/09/2011

Is this review helpful?


The product works exactly as advertised. It works great. Immediately stopped receiver hitch rattle. Recommend to anyone looking for a simple solution to a noisy trailer hitch.6862



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Aaron F.01/31/2011

Is this review helpful?


I searched several different types of anti-wobble devices and decided to try this one. I'm glad that I did because it works great! No more wobble on my hitch-mounted cargo carrier. The package arrived with perfect timing as I was just loading up our vehicle. I am very happy with this product and would highly recommend it.6461



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: JP01/15/2011

Is this review helpful?


problem solver I tried this in place, yet to use it while towing, but it is obvious that this will cure my noisy towing.5534



Roadmaster Quiet Hitch for 2 - RM-061

ratingratingratingratingrating by: Jim12/13/2010

Is this review helpful?


Quick and accurate As with all my etrailer orders, they are well processed, well communicated, and delivered quickly. I have not had any problems when online shopping at etrailer. 4044




Ask the Experts about this Roadmaster Hitch Accessories
Expert Answers about Roadmaster Quiet Hitch for 2" Trailer Hitches - RM-061                                            Do you have a question about this Hitch Accessories?


  • 2 Anti-Rattle Device RM-061 Can be Placed on the Underside of a Hitch Opening
  • Yes, the 2 inch anti-rattle device, part # RM-061, can be placed on the underside of a hitch opening, as long as clearance allows it. The nuts will not vibrate loose as long as they are securely tightened down. There is not a safety device made specifically for this part.
    view full answer...

  • Where To Mount a Roadmaster Quiet Hitch Anti-Rattle Device # RM-061
  • The anti rattle ring needs to butt up directly against the hitch and the bar butts up to the drawbar. The bolts on the device then need to be tightened down. This keeps the unit in position and working to keep the accessory nice and snug. We have a video installation of the Roadmaster Quiet Hitch Anti-Rattle Device, item # RM-061, for you to review, that shows the complete installation procedure.
    view full answer...

  • What Anti-Rattle Device Would Work On A Class III 2 inch Hidden Hitch
  • If the rattling is coming from between the hitch and the drawbar you can use something as simple as a wedge type anti-rattle device. The No-Rattle Trailer Hitch Wedge, # 93347, works well for this application. The Roadmaster Quiet Hitch, # RM-061, is a good solution as well. Other than the fact that the 93347 is a wedge design and the RM-061 is a sleeve design, the only major difference is that the RM-061 is tightened down in two places. I am including video links that will review both of the
    view full answer...

  • The Diameter of the U-Bolt in the Roadmaster Quiet Hitch for 2 Inch Trailer Hitches # RM-061
  • The U-Bolt portion of the Roadmaster Quiet Hitch for 2 Inch Trailer Hitches, # RM-061, is 11/32 inches in diameter. The thickest part of the base is 7/8 inches in diameter. The most narrow part of the base (where the nuts are) is about 11/16 inches in diameter. The inside diameter across is about 3-1/8 inches. The outside diameter across is just under 3-7/8 inches (3.819 inches).
    view full answer...

  • What Material Is The Roadmaster Quiet Hitch # RM-061 Made From
  • I contacted our representative at Roadmaster and he informed me that the item you selected, Roadmaster Quiet Hitch, part # RM-061, is made of mild steel and is Zinc plated. I have linked a video review of the Roadmaster Quiet Hitch, part # RM-061.
    view full answer...

  • Can the Roadmaster Quiet Hitch # RM-061 be Installed with the U-Bolt on the Underside of Ball Mount
  • Installing the Roadmaster Quiet Hitch for 2 inch Trailer Hitches, item # RM-061, with the U-Bolt around the underside of the hitch receiver would not present a problem. You will just need to make sure there is room at the top of the receiver to tighten the nuts and lock nuts on the U-Bolt.
    view full answer...

  • From What Material is the Roadmaster Quiet Hitch Anti-Rattle Device # RM-061 Made
  • According to our contacts at Roadmaster, the Quiet Hitch Anti-Rattle Device, # RM-061, is made of mild steel and it is zinc-plated. I have included a link to a video review of this part for you to view.
    view full answer...

  • Can an Anti-Rattle Device be Used With a Weight Distribution System
  • I spoke with my contact at Reese about weight distribution and anti-rattle devices. He stated that the use of an anti-rattle device is permissible and cited the Draw-Tite J-Pin Stabilization Pin and Barrel Lockset, # 63201, as the type of anti-rattle he would use. I have included a link to a video review of the J-Pin for you to view. If your trailer hitch is not J-Pin compatible, then using the Roadmaster Quiet Hitch, # RM-061, should be fine. Depending on the weight of the trailer, the force
    view full answer...

  • Fit of Roadmaster Quiet Hitch Part RM-061 on 2011 Jeep Grand Cherokee
  • The Quiet Hitch should fit the receiver on your Grand Cherokee. Just to be sure, I would recommend measuring the outside dimension of the receiver. The inside dimensions of the Quiet Hitch are 2-1/2 by 3-1/8 inches. You will need about 3/4 inch of exposed receiver tube behind the flange on the receiver tube for the Quiet Hitch to attach to.
    view full answer...

  • Installation of the Roadmaster Quiet Hitch # RM-061
  • You can install the Roadmaster Quiet Hitch # RM-061, reverse of how it is installed as pictured or to either side. Basically what the Quiet Hitch does is take up or eliminate the play between the ball mount and the hitch. This play is there because of the difference in tolerances between the ball mount and the receiver opening. I have produced a short video showing the other ways to install the Roadmaster Quiet Hitch # RM-061.
    view full answer...

  • How to Charge Two 12 Volt Batteries on an RV Towed by a Ford F-150
  • The 12 volt circuit on a 7-Way trailer connector can provide a maintenance charge to a 12 volt battery but it will not be able to fully charge it because the wiring for a 7-Way is too small to carry the current required. What you can do to charge the batteries on the RV is to first install a battery isolator, # TR118665, in the truck. You will need to attach one terminal to the positive on the truck battery and then connect the center terminal to a 12 volt ignition source (something that is o
    view full answer...






Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com