RoadMaster Tracker Tow Bar - 5,000 lbs

Roadmaster Tow Bars - RM-020

Safely and easily tow your vehicle without spending a fortune. RoadMaster's Tracker series tow bar has a 5,000-lb capacity, connects to any 2" ball and fits RoadMaster XL, EZ and standard brackets.

Features:

• A-frame tow bar allows you to tow your vehicle safely behind your RV
• Full-length crossbar provides maximum strength
• Foldable design makes it easy to store
• Sealed arms guard against moisture and debris
• High-tech, powder coat finish offers superior durability
• Tracker model fits RoadMaster XL, EZ and standard base-plate brackets
  • Requires RoadMaster quick disconnects for removal of XL and EZ front extensions
  • Will not work with MX series base plates
• Made in the USA

Specs:

• Coupler: 2" ball
• Capacity: 5,000 lbs

Please note: The Tracker tow bar does not work with RoadMaster MX series base plates.

020 RoadMaster Tracker Tow Bar

Customers Who Purchased This Tow Bars Also Bought...

Ask the Experts about this Roadmaster Tow Bars

• Tow Bar for a 1991 Geo Tracker
  
• Yes, the Roadmaster Tracker Tow Bar, product number RM-020, will work with your base plate and your vehicle. If you also need to wire the vehicle for towing, products number 38955 and 118158 will take care of those needs. I will attach links to the above referenced products and available videos for your review.
  view full answer...


• Tracker Tow Bar for 1999 Saturn SL Behind 2006 Dodge Dakota
  
• This towbar setup, RoadMaster Tracker part # RM-020 will work with your vehicles. However, there are other components you will need. You will need base plates for your 1999 Saturn SL. You could use part # 154-3 or part # 52181-1. If you went with the EZ Base Plate kit you will also need part # RM-222. You will also need safety cables like part # RM-643 You will also need to have tail lights for the Saturn. You can either wire the Saturn lights to your Dakota with part # RM-154, or you can
  view full answer...


• Can RoadMaster Tracker Towbar Be Used with a 2000 Dodge Neon
  
• Yes the RoadMaster Tracker Tow Bar will work with a Neon, but you will need appropriate base plates on the Neon in order for the tracker tow bar to attach to it. The Tracker Towbar will fit any RoadMaster standard, XL or EZ style base plates. There is one set of base plates available for your 2000 Neon, and they are the EZ style. Your base plates are part # 52255-1.
  view full answer...


• Are Base Plates Necessary to Tow 2005 Chevy Aveo with a Tow Bar
  
• A vehicle specific Base Plate Kit is required to complete the connection between the tow bar system and the towed vehicle. The base plates remain permanently affixed to the vehicle being towed. A 2005 Chevy Aveo would need the part # 3129-1 XL Style Base Plate Kit. You would then choose a tow bar with the features you want that is compatible with the XL style base plates. The Roadmaster Tracker Tow Bar, part # RM-020, or any other tow bar that is compatible with the XL base plates would work
  view full answer...


• WhatTow Bar And Brackets Fit 2002 Mazda Miata MX5 That Will Not Damage Bumper
  
• When towing a vehicle with a tow bar you will need a tow bar, the required base plates and lights for the vehicle being towed. Also recommended are safety cables. For your 2002 Mazda Miata the RoadMaster Tracker Tow Bar - 5,000 lbs, # RM-020, will work with an additional base plate kit. You will need the Roadmaster XL Base Plate Kit, # 711-4, to attach to your car for the tow bar to connect to. The brackets attach to your car and the visible portions of the brackets can be removed when not
  view full answer...


• What Parts Do I Need to Flat Tow a 1999 Chevrolet Suburban
  
• For a complete towing procedure and to see if any additional transmission parts are needed, please refer to your vehicle owner manual. It should have a complete section on towing. The Roadmaster Tracker Tow Bar, part # RM-020, includes the tow bar and crossbar. The tow bar attaches to the cross bar, and the cross bar attaches to a set of base plates. You will also need a set of base plates. These bolt to the underside of your Suburban frame, close to the front bumper. These are the attachm
  view full answer...


• Base Plate Kit, Tow Bar, Safety Cables, and Wiring to Tow a 2005 Automatice Volkswagen Golf Diesel
  
• You will be able to tow the 2005 Golf, automatic diesel using a tow bar. But first, you will need to install base plate kit, # 521228-1. You will then need a tow bar compatible with EZ style base plates. The RoadMaster Tracker Tow Bar, # RM-020, will work with these base plates. If you want the base plates to be removable and use the Tracker Tow Bar, you will also need Roadmaster Tow Bar Quick Disconnect Kit, # RM-201. You will also need safety cables and a light kit as required by law. Fo
  view full answer...


• Additional Equipment Required for Flat Towing a 2010 Toyota Tacoma with Roadmaster Tracker Tow Bar
  
• The Roadmaster Tracker Tow Bar is compatible with the XL bases plates, part # 1175-1, that will fit your 2010 Tacoma as long as it is not an X-Runner model. With these two parts, your tow bar is set. All you have left is wiring/lights and possibly a supplemental braking system. We have two basic options for wiring/lights. You can use a diode wiring kit like part # RM-154. This kit wires diodes into your existing Tacoma wiring and will use the factory Tacoma lights when towing. I have added a
  view full answer...


• Will the RoadMaster Tracker Tow Bar # RM-020 Work to Flat Tow a 2001 Jeep Wrangler
  
• As long as the curb weight of your Jeep Wrangler is less than 5,000 pounds, check owners manual, the RoadMaster Tracker Tow Bar - 5,000 lbs, item # RM-020, can be used to tow the vehicle. You will also need a set of base plates to tow the 2001 Wrangler. There are several styles of bumper for the wrangler and you will need to select the base plate kit that will work with the bumper on your vehicle. If you have a U-Channel bumper or double tube bumper the Roadmaster XL Base Plate Kit, item # 14
  view full answer...


• Base Plates, Tow Bar, Safety Cables, and Wiring to Flat Tow 1991 Mazda Miata MX-5
  
• The first item you will need to flat tow your 1991 Mazda Miata are base plates. We carry two different options of base plates for your vehicle. First are the XL Plates, # 711-4. These have removable drawbars held in place with a pin and clip. With the drawbars removed the base plates are virtually invisible. For these, trimming of the spoiler, air damn, grille, or plastic fascia may be required for installation. The other option are Standard Plates, # 711-2. These are fixed brackets and will be
  view full answer...


• Tow Bar Recommendation for the 1995 Suzuki Sidekick
  
• If your 1995 Suzuki Sidekick has RoadMaster, EZ, XL, or standard base plates installed on it then the RoadMaster Tracker Tow Bar - 5,000 lbs, item # RM-020, will work directly with the base plates on the vehicle. Most of the RoadMaster tow bars will work with these base plates (see link). To ease installation and removal of the tow bar you will need the Roadmaster Tow Bar Quick Disconnect Kit, item # RM-201. This will allow you to remove that towbar and cross bar easily and also allows easy r
  view full answer...


• List of Parts Needed to Flat Tow A 2010 Honda CR-V with a RoadMaster Tracker Tow Bar
  
• Along with the Roadmaster Tracker Tow Bar, item # RM-020, you will need a set of base plates for the 2010 Honda CR-V. The correct base plate kit for your vehicle is the Roadmaster XL Base Plate Kit, item # 1559-1. This kit will not work on vehicles with a brushguard installed on the front. You will also need a set of Roadmaster Tow Bar Quick Disconnects, item # RM-201. These will allow you to disconnect the tow bar, cross bar from the vehicle brackets so the brackets can easily be removed.
  view full answer...


• Everything Needed to Allow Flat Towing of My 2000 Chevy Tracker 4 door Behind Motorhome
  
• You are headed in the right direction. The Roadmaster XL Base Plate Kit, item # 1012-1, will fit your 2000 Chevrolet Tracker, as long as you do not have the factory brush guard option on your vehicle. The RoadMaster Tracker Tow Bar, item # RM-020 will work nicely with the 2000 Tracker that should weigh in at less than 4,000 lbs. To connect the Tracker tow bar to the XL base plate kit and be able to remove the base plate draw bars you will also need the Roadmaster Tow Bar Quick Disconnect Kit, it
  view full answer...


• What Do I Need to Flat Tow my 2001 Toyota Camry
  
• In order to tow your 2001 Toyota Camry you could use the RoadMaster Tracker Tow Bar - 5,000 lbs, part # RM-020, that you referenced. For base plates I would recommend you use Roadmaster EZ Base Plate Kit, part # 521157-1. I attached a link below to a page on vehicle specific base plates below that you might find helpful. You will also need the following to complete your setup: Magnetic Towing Light Kit, part # C-ATL20A, for an easy to install, less permanent solution. Or for a more perman
  view full answer...


• What Would I Need to Flat Tow my 2005 Chevy Aveo
  
• I did some checking and it looks like manual transmission 2005 Chevy Aveos can be flat towed without issue, but the automatic transmission Aveos can not be flat towed. You would have to check your owners manual to see if a tow dolly like a RoadMaster Tow Dolly with Electric Brakes, part # RM-2000-1 could be used. I attached installation instructions below for you to check out also. If you had a manual transmission you could use a RoadMaster Tracker Tow Bar - 5,000 lbs, part # RM-020, like you
  view full answer...


• Base Plates, Tow Bar, Wiring, Safety Cables, Braking System to Flat Tow a 2002 Jeep Grand Cherokee
  
• The first thing you will need to flat tow your 2002 Jeep Grand Cherokee is a set of base plates, # 1419-7 (fits models without brushguard). Next, you will need a compatible tow bar. You can use the RoadMaster Tracker Tow Bar, # RM-020, and add Roadmaster Tow Bar Quick Disconnect Kit, # RM-201, for removal of front base plate extensions. To complete the towing set up for your Jeep, you will need safety cables, lighting, and a supplemental braking system as required by law. For safety cables, I
  view full answer...


• Parts Needed To Flat-Tow My 1997 Geo Tracker 2 door 4x4
  
• In addition to base plates, tow bar, and wiring, you will also need safety chains and a supplemental braking system to flat-tow your 1997 Geo Tracker 2 door 4x4. The Roadmaster XL Base Plate Kit, part # 118-15, would be a good option for base plates for your Tracker. The XL Base Plate Kit features removable drawbars so that when the vehicle is not being towed, the base plates are less visible. The tow bar you selected, RoadMaster Tracker Tow Bar, part # RM-020, would work to tow your Track
  view full answer...


• Recommendation for Tow Bar, Base Plate Kit and Wiring to Flat Tow a 2010 Mazda5 Manual Transmission
  
• The only company that has a base plate kit available for the 2010 Mazda 5 is Blue Ox. The Base plate kit needed is the Blue Ox Base Plate Kit with Removable Arms, item # BX2525. You will also need a tow bar, for a motor home with a 2 inch receiver I would recommend the Blue Ox Aladdin Tow Bar, item # BX4325. This tow bar comes with safety cables. For a tow bar that utilizes a hitch ball, the Blue Ox Acclaim Tow Bar, item # BX4330, would be a good choice. Safety cables are included with th
  view full answer...


• Base Plates, Tow Bar, Wiring, Safety Cables, Braking System to Flat Tow a 2010 Dodge Caliber
  
• Yes, you can use a tow bar to flat tow your 2010 Dodge Caliber. There are a few items you will need in order to flat tow the vehicle. First, you will need base plates. Base plates provide attachment points required by the tow bar. For your Caliber, you can use Roadmaster EZ Base Plates, # 52281-1. With these tow bars installed you will be able to use the Tracker Tow Bar, # RM-020, that you have referenced, along with the Quick Disconnect Kit, # RM-201 (needed to allow the removable arms to be re
  view full answer...


• What Is Needed To Flat Tow a 2011 Jeep Wrangler Sahara Unlimited 4 Door
  
• Yes, this RoadMaster Tracker Tow Bar, part # RM-020, will work to flat tow your 2011 Jeep Wrangler Sahara Unlimited 4 door. You will also need the following products as well to complete your setup: Roadmaster XL Base Plate Kit, part # 1432-1. This will provide the attachment point for the tow bars on your Wrangler. Roadmaster Tow Bar Quick Disconnect Kit, part # RM-201. This will give you a quick way to connect and disconnect your Wrangler from the tow bars. RoadMaster 68 inch Single
  view full answer...