Redline Trailer Spindles - R50642
- Includes washer, castle nut and pin
| Part No. |
Capacity |
A |
B |
C |
D |
E |
F |
Round/Square |
| R50642 |
2500 lb |
2.25 |
2.24 |
1.74 |
1.25 |
1.00 |
6.00 |
Round |
Customers Who Purchased This Trailer Spindles Also Bought...
Ask the Experts about this Redline Trailer Spindles
Do you have a question about this Trailer Spindles?
- Which Hub Do I Need for the R50642 Spindle.
- The hub you will need for the Spindle 2.25 inch RD x 6 inch STUB, item # R50642, is the Trailer Hub Assembly - 5,200 & 6,000 lbs Axles - 6 on 5-1/2, item # 42655UC1.
view full answer...
- Complete Spindle Length Dimensions by Section for the # R50642 2500 Pound Spindle
- For the Spindle 2.25 inch RD x 6 inch STUB, item # R50642, the width of the B or seal surface area of the spindle is .550 inches, and the width of the C or inner bearing surface of the spindle is 1.00 inches. The width of D or the outer bearing surface is 1.075 inches and the distance between the inner and outer bearing surfaces is 1.350 inches. The width of the threaded portion is .780 inches and the overall length of the spindle is 10-7/8 inches.
These dimensions are usually not needed. To
view full answer...
- Which Spindle Do I Need To Use with 8 on 6-1/2 Drum and Hub Assembly part # 8-219-4UC3
- I cross referenced the bearings that Trailer Hub & Drum Assembly - 5,200, 6,000, 7,000 lbs. Axles - 8 on 6-1/2, PART # 8-219-4UC3, uses to determine which spindle you will need. The correct spindle you will need is EZ Lube Spindle 2.25 Inch RD x 3 Inch STUB, part # R50342EZ.
view full answer...
- Size of Axle Spindle For M/H trailer
- The axle spindle you need to order will depend on the weight capacity of your trailer and on the type of spindle (see link) already being used, if you only need to replace one spindle.
To figure out which spindle is correct you can use the bearing part numbers, both inner and outer, and the shape and length of the spindle stub on your trailer. The bearing numbers will let you cross reference the correct spindle measurements for your hub. The axle stub shape and length will allow you to use th
view full answer...
