Pollak Accessories and Parts - PK52249
This circuit breaker junction box provides a neat, clean way to mount multiple circuit breakers to the firewall of your vehicle. Junction box has space for seven separate circuit breakers.
Features:
- Junction box for studded circuit breakers
- Provides neat, clean mounting point for multiple circuit breakers
- Has space for 7 studded circuit breakers
- Includes bus bar to dissipate heat buildup
Specs:
- Breaker slots: .20" x .30"
- 1-Year limited warranty
52-249 Pollak 7-Circuit-Breaker Junction Box
Customers Who Purchased This Accessories and Parts Also Bought...
Ask the Experts about this Pollak Accessories and Parts
Do you have a question about this Accessories and Parts?
- Instructions for Circuit Breaker Installation in the Pollak 7-Circuit-Breaker Junction Box # PK52249
- I spoke with my contact at Pollak and found that the Pollak 7-Circuit-Breaker Junction Box, item # PK52249, has a metal bar in the bottom of the junction box that is designed to accept metal base circuit breakers that do not have a mounting bracket attached to the bottom. These circuit breakers have recesses in the bottom that accept the studs sticking up from the metal bar in the junction box. There are no directions available for the junction box.
Our part numbers for the appropriate circui
view full answer...
- What Are The Dimensions Of The Pollak 7-Circuit-Breaker Junction Box # PK52249
- The dimensions on the Pollak 7-Circuit-Breaker Junction Box, part # PK52249, are as follows,
With the mounting holes on the left and the right the length (right to left) from one edge of the mounting hole tab to edge of the other mounting hole tab is 8-11/16 inches. The dimension from center of one mounting hole to the center of the other mounting hole is 8-5/64 inches.
Width is 3-3/4 inches. The dimension from mounting hole center to other mounting hole center is 3-3/16 inches.
Height
view full answer... 
- Is the Bus Bar the Common Power Point on the Pollak 7-Circuit-Breaker Junction Box
- On the Pollak 7-Circuit-Breaker Junction Box, # PK52249, the bus bar is the common power point for all of the circuit breakers attached to it. You would connect power to one of the studs at either end of the bar to supply power for all the breakers.
The bus bar was also designed to dissipate excess heat generated from the items attached to the circuit breakers in the box. The box accepts studded circuit breakers like # PK54-120, # PK54-130, and # PK54-140.
view full answer...
