Pollak 6 Pole to 4 Pole Connector Adapter

Pollak Wiring - PK12717

Quickly and easily convert a 6-pole, round pin connector to a 4-pole, round pin connector with this RV connector adapter. Adapter has a non-corrosive nylon shell.

Features:

• 6-Pole to 4-pole RV flat adapter
  • Quick and easy conversion of 6-pole, round pin connector on your vehicle to the 4-pole flat connector on your trailer
  • Connects Ground, Left Turn, Right Turn, Stop and Tail Light circuits
• Non-corrosive nylon shell and insert

Specs:

• Application: Vehicles with 6-pole connectors
• 1-Year limited warranty

This adapter will make the two trailer connectors pictured below work together.

12-717 Pollak 6-Way to 4-Way Connector Adapter
Replaces 37308
Similar to 37325

Customers Who Purchased This Wiring Also Bought...

Ask the Experts about this Pollak Wiring
Do you have a question about this Wiring?

• Brake Lights on RV Not Working When Using 6 Round to 4 Flat On 2007 Dodge Sprinter Cab and Chassis
  
• I would start by checking the wiring connector on your 2007 Dodge Sprinter without anything hooked up. You will want to use a circuit tester, part # 3808 to test the the functions on the 6-way connector without anything hooked up. You will want to have a friend help you, and with the vehicle in the power accessory mode, in park and parking brake engaged have them operate the light functions (see picture) as you test each pin. The pin at the 12 oclock position should be tail and running lights, a
  view full answer...


• Need to Adapt 6-Way Connector on Motor Home to 4-Pole Round Tow Bar Cable
  
• I would recommend installing a 4-pole round socket, part # PK11404 on the rear of the motor home, rather than trying to construct an adapter. The socket would need to be tapped into the wires feeding your 6-way. We offer 4 conductor wire, part # 16-4B-1 that is sold by the foot, you would probably want at least two feet. The wire is conveniently color coded, and would attach to the 4-pole socket as follows: Attach the brown wire to the # 2 terminal. Terminal # 1 would be grounded to the motor
  view full answer...