|
Establish a secure connection between your trailer and semi or other tow vehicle with this 7-pole, solid pin, wire-insertion-style socket. Zinc die-cast socket is self-grounding and includes floating pins for easy alignment and maximum pin contact.
Features: - Zinc die-cast 7-pole socket connects trailer to towing vehicle
- Round, floating, solid brass pins
- Easy alignment and maximum contact
- Minimum voltage drop is ensured
- Dielectric (non-conducting) grease coating
- Protects against corrosion and resistance
- Wide range of wire gauges acceptable, from #16 wire to #8 ground wire
- Ground terminal accepts minimum #14 gauge - maximum #8 gauge
- All other terminals accept minimum #16 gauge - maximum #10 gauge
- Self-grounding to #1 Ground Terminal
- Slant-mounted with built-in drain slot on cover
- Rids housing interior of accumulated moisture
- Opens and closes with stainless steel spring
- Bottom lip extended for better plug support
- 2-Hole mounting style
- Highest quality - meets and exceeds all standards of SAE J560
- Interchangeable with all competitive makes
Specs: - Mounting dimensions: 2" diameter hole
- Volt rating: 6 volts - 28 volts
- Current rating: 40 continuous-duty amps
- Wiring configuration:
- Color - circuit - recommended wire gauge:
- White - Ground Return - 10 gauge (FMVSS-121 Anti-lock Gauge - 8)
- Black - Clearance, Side Marker, Identification - 12 gauge
- Yellow - Left Turn and Hazard Signal - 12 gauge
- Red - Stop Lamps and Anti-Lock Devices - 10 gauge (FMVSS-121 Anti-lock Gauge 10)
- Green - Right Turn and Hazard Signal - 12 gauge
- Brown - Tail, Rear Clearance, Marker and License-Plate Lamps - 12 gauge
- Blue - Auxiliary Circuit/ABS - 10 gauge
- 1-Year limited warranty
11-720 Pollak Heavy-Duty, 7-Way, Round Pin Trailer Wiring Socket - Vehicle End Replaces 52016
|