Pollak Wiring - PK11609
Establish a secure connection between your trailer and your towing vehicle with this 6-pole, round pin, wire-insertion-style socket. Zinc die-cast socket is self-grounding and includes floating pins for easy alignment and maximum pin contact.
Features:
- Die-cast, 6-pole socket connects trailer to towing vehicle
- Round, split brass pins
- Minimum voltage drop is ensured
- Dielectric (non-conducting) grease coating
- Protects against corrosion and resistance
- Wire gauges up to #12 accepted
- Concealed terminals for durability
- Spring-loaded lid
- Keeps dust and moisture out of interior
- 2-Hole mounting style
Specs:
- Mounting dimensions: 1-3/8" diameter hole
- Mounting screw holes: 1/4"
- Wiring configuration:
- Color - circuit:
- White - Ground Return
- Brown - Tail Lights
- Yellow - Left Turn
- Red - Stop and/or Electric Brakes
- Green - Right Turn
- Blue - Auxiliary Circuit
- 1-Year limited warranty
11-609 Pollak 6-Way, Round Pin, Trailer Wiring Socket- Vehicle End
Replaces 30200
Customers Who Purchased This Wiring Also Bought...
Ask the Experts about this Pollak Wiring
Do you have a question about this Wiring?
- Completing the Wiring for a 7-Way Trailer Connector
- The black wire coming out of the 7-way connector should be connected to 12 volt power from the vehicle battery. The blue wire connects to the trailer brake feed circuit coming from the brake controller mounted in the vehicle.
If you need to run these wires for your connector you will need a 40 amp circuit breaker, item # PK54540, to attach the black power wire to the positive battery terminal. You can use the Wiring Kit for Electric Brake Controllers, item # 5506 and the 40 amp circuit breake
view full answer...
- 6-Way Fifth Wheel Trailer Connector for 2011 GMC Sierra
- If your Sierra already has the 7-way connector installed in the bed, you can use an adapter to convert the 7-way to a 6-way. Hopkins makes a great heavy-duty adapter. If the center pin on the 6-way connector on the trailer carries the power to the trailer brakes, use part # HM47085. If the center pin is used for an auxiliary circuit, use part # HM47083.
If you do not have the connector in the truck bed, I would recommend part # 31156. You could then use the connector you referred to, part # P
view full answer...
- Wiring for Light Functions on a 2004 Jeep Grand Cherokee Flat Towed Behind a Motor Home
- There are a couple of different ways to add lighting functions on your 2004 Jeep Grand Cherokee so that it can be flat towed behind your motor home. If the motor home has a 6-Pole trailer connector, it would be easiest to use an adapter, 6-Pole to 4-Way flat, like # PK12717.
You can then use diode kit, # RM-154. I have included a link a couple of videos that show typical installations of this kit for you to view.
Another option would be to use the adapter and a magnetic kit, # C-ATL20A, if
view full answer...
- Availability of a 4-Way Flat to 6-Way Round Trailer Connector Adapter
- We actually have a pre-made 4-Way to 6-Way round adapter that you could use if you wanted to, # 30637. For this you would plug in the 4-Way on the vehicle to the 4-Way on the adapter, ground the white wire to the frame of the vehicle, and tape up the other 2 wires on the adapter if those functions are not needed (if you just needed lighting functions).
To make your own you would need a 4-Way trailer end connector, like # HM48110, and wire the blunt cut bare wire ends to the 6-Way round you ha
view full answer...
