Pollak 5-Pole, Round Pin Trailer Wiring Connector - Chrome - Trailer End

Pollak Wiring - PK11501

Establish a secure connection between your trailer and tow vehicle with this chrome-plated, 5-pole plug. Split brass pins ensure minimum voltage drop, and pull grips enable easy insertion and removal.

Features:

• Standard, 5-pole plug connects trailer to socket on tow vehicle
• Round, split brass contacts
  • Minimum voltage drop and maximum current capacity are ensured
  • Dielectric (non-conducting) grease coating
    • Prevents corrosion and resistance
  • Solid brass terminal screws
• Chrome-plated, die-cast zinc housing for durability
  • Finger grips make insertion and removal easy
• ABS thermoplastic interior
  • High-impact, green insulators

Specs:

• Volt rating: 12 volts - 24 volts
• Current rating: 15 amps
• Wiring configuration:
  • Color - circuit:
    • White - Ground Return
    • Green - Right Turn and Brake Lights
    • Yellow - Left Turn and Brake Lights
    • Red - Auxiliary Circuit
    • Brown - Tail Lights
• 1-Year limited warranty

11-501 Pollak 5-Way, Round Pin Trailer Wiring Connector - Chrome - Trailer End

Customers Who Purchased This Wiring Also Bought...

Ask the Experts about this Pollak Wiring
Do you have a question about this Wiring?

• Availability of a 5 way Round Trailer Wiring Diagram
  
• There is no standard diagram for the 5 way round connector, item # PK11501. You will need to use a circuit tester, item # 3808, to test the wires and wire the vehicle and trailer to match. When wiring, your green wire will be right turn/brake, the yellow wire will be left turn/brake, the brown wire will be the taillights, and the white wire will be the ground. From there, you can wire the remaining pole to any function you like such as power for trailer accessories, electric brakes, or for a
  view full answer...


• Adding a Converter and 4-Way Flat Trailer Connector, # 119176KIT to a Motorcycle to Tow a Trailer
  
• While we do not carry a 5-Way round to 4-Way flat trailer connector adapter, you do have an option. Because motorcycles use a 5 wire system, you will need to use a converter, # 119176KIT, in order for the trailer to be compatible with the motorcycle wiring. I have included a link to the installation details for this wiring harness for reference. You will need to follow the steps for a 3 wire system. With this wiring harness installed it will be compatible with the 4-Way flat trailer connector on
  view full answer...


• Outside Diameter of 5-Pole Trailer Connector, Part # PK-11501
  
• The outside diameter of the Pollak 5-pole Round Trailer Connector, part # PK11501 measures .80 inches.
  view full answer...