Pollak Heavy-Duty, 4-Pole, Round Pin Socket, Concealed Terminals - Chrome - Vehicle End

Pollak Wiring - PK11410

Establish a secure connection between your trailer and your towing vehicle with this 4-pole, round pin, wire-insertion-style socket. Chrome-plated socket has concealed terminals to provide easy assembly and durability.

Features:

• Heavy-duty, chrome-plated, 4-pole socket connects trailer to towing vehicle
• Round brass pins
  • Minimum voltage drop is ensured
  • Dielectric (non-conducting) grease coating
    • Protects against corrosion and resistance
• Concealed terminals for durability
  • Provide easy assembly
• Spring-loaded lid
  • Keeps dust and moisture out of interior
• 2-Hole mounting style

Specs:

• Application: Chrome, 4-pole connectors measuring 13/16" in diameter
• Volt rating: 12 volts - 24 volts
• Current rating: 20 amps
• Mounting hole diameter: 1/4"
• Wiring configuration:
  • Color - circuit:
    • White - Ground Return
    • Green - Right Turn and Brake Lights
    • Yellow/Red - Left Turn and Brake Lights
    • Brown - Tail Lights
• 1-Year limited warranty

11-410 Pollak Heavy-Duty, 4-Way, Round Pin Socket, Concealed Terminals - Chrome - Vehicle End
Replaces 30101

Customers Who Purchased This Wiring Also Bought...

Ask the Experts about this Pollak Wiring
Do you have a question about this Wiring?

• 4-Way Round Chrome Car End Wiring Details
  
• There is not an industry standard wiring diagram for the 4-Way Round Car End, part # PK11410. You will need to use a circuit tester, part # 3808, to check which pins have which functions on your trailer, and then attach the corresponding wires to their respective pins on the vehicle connector. If you are towing a vehicle behind a motor home the connections are usually as follows. The top left connection inside the vehicle end, with the cover raised, is the yellow left turn/brake connector, t
  view full answer...


• 4-Way Round Chrome Car End for a 2003 Jeep Wrangler To Tow Behind Motor Home
  
• To install towing lights on your 2003 Jeep Wrangler you have two options. One way is to use a taillight isolating diode system, RM-154, to wire the motor home lighting system into the car's with diodes protecting both from damage. The second is to use a separate set of bulbs in the rear taillights, RM-155, that are run only from the motor home and do not interact with the vehicle wiring. This option requires enough space in the towed vehicles taillights to mount the extra bulb, but it eliminates
  view full answer...


• How to Wire a 4-Way Round Trailer Wiring Connector
  
• There is no standard for wiring the 4-way round connector so you will have to use a circuit tester, part # 3808 if you need one, to test the wires and wire the connector according to the wiring of your existing connector. I have posted links to the parts mentioned above and our wiring help page below.
  view full answer...