See What Fits Your Vehicle
customer service | view cart  View Cart

Trailer Lights > Clearance Lights > Submersible Lights > LED Light > 4-1/16L x 1-1/4W Inch > Rectangle > Amber > Non-PC Rated > Surface Mount > Optronics

Sealed, Miro-Flex, Thin Line, LED Trailer Marker/Clearance/ID Light, 4 Diode - Amber w/ Clear Lens

Optronics Trailer Lights

Rating: ratingratingratingratingrating
4 reviews


Code:   MCL63CAB

Price:$9.75

Shipping Weight: 0.1 pounds

Shipping Special
Quantity: 




Optronics Trailer Lights - MCL63CAB

4-1/16" L x 1-1/4" W x 1-1/8" D; sealed; waterproof; 1-wire; 4 amber LEDs; Miro-Flex - brightest light using the least energy; clear lens

Features:

  • Clear, Thin Line side marker and clearance light
  • Great replacement for incandescent lights
    • No bulbs to replace
    • No brittle filaments
  • Crystal Clear (TM) lens
  • Sealed, waterproof lens and housing
  • Mounts on industry-standard, 3" centers
  • Single-wire design
    • Grounds through mounting hardware
  • 4 Amber LEDs (Light Emitting Diodes)
  • 4-1/16" Long x 1-1/4" wide x 1-1/8" deep
  • Miro-Flex technology increases light output while using 90 percent less energy than incandescent bulbs
    • Has contemporary appearance while it maintains traditional footprint
    • LED light draws 0.086 amps at 12.8 volts
  • DOT approved
  • Lifetime warranty on LEDs


Miro-Flex faceted reflector design provides increased light output and a contemporary appearance while maintaining a traditional footprint.

Features sonically sealed, waterproof lens and housing in a single unit.

Multi-diode design optimizes light output. Mounts on industry-standard, 3" centers.

Includes industry-standard, 2-prong plug connection.



diagram

MCL-63CAB Optronics Sealed, Miro-Flex, Thin Line LED Trailer Marker, Clearance or Identification Light, 1-Wire, 4-Diode - Amber LEDs with Clear Lens





Video of Sealed, Miro-Flex, Thin Line, LED Trailer Marker/Clearance/ID Light, 4 Diode - Amber w/ Clear Lens


Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video Demo Optronics Side Light MCL63CAB
Optronics Sealed Miro-Flex Thin Line LED Trailer Marker with Clear Lens Review

Video Transcript for Optronics Sealed Miro-Flex Thin Line LED Trailer Marker with Clear Lens Review

Today we are going to take a look at Optronics Sealed Miro-Flex, Thin Line LED Side Marker, part number MCL63CAB. This light is sealed and waterproof, so it is fine for use on boat trailers. It features a crystal clear lens and 4 amber colored LEDs. The light draws .086 amps at 12.8 volts and Optronics covers the LEDs with a lifetime warranty. Next, we are going to show you how it works. We will take our power supply and connect one of the pins at the back with our ground connection and the other pin with our power source. Next we will turn off the overhead lights so you can see how bright it is. And there you have it for Optronics Sealed Miro-Flex Thin Line LED Side Marker, part number MCL63CAB.


Customers compare MCL63CAB to these similar products





Customers Who Purchased This Trailer Lights Also Bought...






Customer Reviews

Sealed, Miro-Flex, Thin Line, LED Trailer Marker/Clearance/ID Light, 4 Diode - Amber w/ Clear Lens - MCL63CAB

Average Customer Rating:  ratingratingratingratingrating5.0 out of 5 stars   (4 Customer Reviews)




- MCL63CAB

ratingratingratingratingrating by: William L.03/31/2011

Is this review helpful?


My son just started to do metal fabrication. First project is a utility trailer. I'm letting him do the project with very little help on my part. Althought I want him to get the the best product for the bests price and not get ripped off. We found that with your company.The customer service was excellent. 10810

comment on this review


- MCL63CAB

ratingratingratingratingrating by: JOE05/21/2012

Is this review helpful?


THE LIGHTS ARE VERY BRIGHT AND EASY TO INSTALL, I'M VERY HAPPY WITH MY ORDER. MY THIRD TIME ORDERING FROM YOU IN THE LAST MONTH. EVERYTHING HAS BEEN BETTER THAN EXPECTED.41177

comment on this review


- MCL63CAB

ratingratingratingratingrating by: Frank05/23/2011

Is this review helpful?


Great way to upgrade original lights! 15132

comment on this review


- MCL63CAB

ratingratingratingratingrating by: Richard01/03/2011

Is this review helpful?


Finished Product The 6 Amber LED's with clear lenses are now on my pickup. The 20 amber and red clears will outfit my trailer. I have attached a pic of the rear of my homesteader ez rider (which mainly hauls my atv) 4949

comment on this review


Ask the Experts about this Optronics Trailer Lights


  • How is Sealed, Miro-Flex, Thin Line, LED Trailer Marker/Clearance/ID Light, # 12855, Wired
  • Sealed, Miro-Flex, Thin Line, LED Trailer Marker/Clearance/ID Light, # 12855, requires a bracket to mount the light. The light itself can plug into the bracket and ground through the mounting hardware. One possible bracket is the Chrome Bracket and Single Wire Plug for Thin Line Trailer Clearance and Side Marker Lights, # A67CB. If you are unable to ground the light through mounting hardware, you can use Two Wire Plug for Thin Line Series Trailer Clearance and Side Marker Lights, # A68P. This
    view full answer...


Info for this part was:


Written by:
Ty

Edited by:
Fran

Test fit by:
Rick

Video by:
Zack

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.





Subscribe to email newsletter

Email  

privacy - we don't send unsolicited email




etrailer.com reviews etrailer.com reviews

All images, layout and content copyright etrailer.com