Sealed, Uni-Lite Mini LED Side Marker and Clearance Light, 2 wire, Grommet Mount, 2 Diode - Red

Optronics Trailer Lights - MCL11RKB

11/16" Diameter x 15/16" deep; PC rated; sealed; waterproof; recessed grommet mount; 2-wire; 2 red LEDs; red lens

Features:

• Red, round, PC-rated mini-light functions as clearance, side marker or identification light
  • Combines clearance and side marker functions
    • Produces 90-degree angle of light left and right when mounted at a 45-degree angle
• Great replacement for incandescent lights
  • No bulbs to replace
  • No brittle filaments
• Sealed, waterproof housing and lens
• Recessed grommet mount
• 2-Wire design includes lead and ground for wires for mounting to all surfaces
• 2 Red LEDs (Light Emitting Diodes)
• 11/16" Diameter x 15/16" deep
  • Installation requires an 11/16" hole at desired location
• LED light draws 0.030 amps at 12 volts
• DOT approved
• Lifetime warranty on LEDs

Less than 3/4" in diameter, the Uni-Lite MCL11 series fits the tightest applications.

Recess mount design is quick and easy to install.

Features sonically sealed, waterproof lens and housing in a single unit.

PC-rated lights function as both clearance and side marker lights when properly mounted at a 45-degree angle.

Design includes both lead and ground wires.

MCL-11RKB Optronics Sealed, Uni-Lite Mini LED Side Marker and Clearance Light with Grommet, PC-rated, 2-wire, 2-Diode - Red

Video of Sealed, Uni-Lite Mini LED Side Marker and Clearance Light, 2 wire, Grommet Mount, 2 Diode - Red

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Optronics Sealed Uni-Lite Mini LED Side Marker and Clearance Light Review

Customers compare MCL11RKB to these similar products

Sealed, Uni-Lite Mini LED Side Marker and Clearance Light w Grommet, 2 wire, 2 Diode - Amber$5.50

Miro-Flex, Sealed, 6-1/2" Oval, LED Trailer Stop/Turn/Tail Light, 3-Function, 12 Diode$19.95

Uni-Lite Mini LED Side Marker/Clearance Light w/ Grommet - 2 Diode - Sealed - Amber w/Clear Lens$6.45

Sealed, Streamline LED Trailer Stop, Turn and Tail Light, 3-Function, 11 Super Diodes$18.95

Sealed, 6-1/2" Oval LED Trailer Stop, Turn and Tail Light, Flange Mount, 10 Super Diode$17.95

Customers Who Purchased This Trailer Lights Also Bought...

Sealed, Uni-Lite Mini LED Side Marker and Clearance Light w Grommet, 2 wire, 2 Diode - Amber $5.50

Bonded 4 Wire - per foot $0.57

Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot $1.21

Rubber Grommet for 6-1/2" Oval Trailer Tail Lights $0.95

Right Angle 3-Wire Pigtail for Sealed Trailer Stop, Turn and Tail Lights $1.15

Replacement parts available for this product

Replacement Flush Mount Rubber Grommet $0.95

Ask the Experts about this Optronics Trailer Lights
Do you have a question about this Trailer Lights?

• Is the Grommet Included with Sealed, Uni-Lite Mini LED Side Marker and Clearance Light, # MCL11RKB
  
• Yes, the grommet is included with the Sealed, Uni-Lite Mini LED Side Marker and Clearance Light, # MCL11RKB.
  view full answer...


• Optronics Trailer Lights # MCL11RKB Recommendation for Fender Clearance Lights
  
• You will need to drill a 3/4 inch hole in the fender of your trailer in order to install a Sealed, Uni-Lite Mini LED Side Marker and Clearance Light # MCL11RKB. These should wire up pretty easily to your trailer and would be run to the running light circuit of your trailer wiring. The amber version of this light is the Sealed, Uni-Lite Mini LED Side Marker and Clearance Light # MCL11AKB. I attached an FAQ article on trailer wiring for you to check out also.
  view full answer...


• How to Install a Mini LED Clearance Light in 1/4 inch Plywood on a Custom Made Tear Drop Trailer
  
• You are correct, the rubber grommet included with the Sealed, Uni-Lite Mini LED Side Marker and Clearance Light, # MCL11RKB, is designed to be installed in a metal housing that is significantly thinner than the 1/4 inch plywood that you are using for the skin of your tear drop trailer. I would recommend cutting a larger hole in the skin of your trailer and then adding a piece of aluminum with the light installed in that. Of course this would require a bit of body work for a professional looki
  view full answer...


• How to Determine Width of Trailer for Lighting Purposes
  
• To determine the width of your trailer for lighting purposes, the width is measured at the widest point of the trailer. It is the responsibility of the trailer owner to determine the width of their trailer, and to ensure that it lit according to state and federal regulations. Your state police, highway patrol or department of transportation is a great resource for finding the regulations that apply in your area. All clearance and marker lights are tied into the running light circuit of t
  view full answer...


• Can Sealed, Uni-Lite Mini LED Side Marker and Clearance Light be Used as Eyes in a Skull Hitch Cover
  
• Actually, yes, you could wire in the mini LED light # MCL11RKB to a 4-Way. Here is how you would need to do it. The power wire for the drivers side eye you need to connect to the left turn/brake light wire on the 4-Way. The other one would go to the right turn/brake light wire (the very last pin furthest from the ground). The ground wires could both go to the 4-Way ground. This would cause both eyes to light up when you step on the brakes and the correct eye to wink when turning left or right
  view full answer...


• What Size Hole Needs to be Drilled to Install a Uni-Lite Mini LED Side Marker # MCL11RKB in Trailer
  
• I went out to our warehouse and measured a Sealed, Uni-Lite Mini LED Side Marker and Clearance Light, part # MCL11RKB, and found that you will need to have a hole that is 11/16 inches to install the # MCL11RKB.
  view full answer...


• Could Sealed, Uni-Lite Mini LED Side Marker and Clearance Light, # MCL11RKB Be Used as a Turn Signal
  
• You could use the Sealed, Uni-Lite Mini LED Side Marker and Clearance Light, # MCL11RKB, as a turn signal light. However, on most trailers, the brake and turn signal lights are usually on the same circuit. If you have this type of trailer, the light will light up with the brakes on. When turn signals are separate, you might want to consider an amber light, # MCL11AKB, as a turn signal. These lights would probably work well on a motorcycle trailer (a trailer towed behind a motorcycle) but for
  view full answer...