Hopkins Plug-in Simple Brake Wiring Adapter - Dodge

Hopkins Accessories and Parts - HM47755

Why mess with wires and splicing, when you can plug it in? Designed to fit Hopkins Agility brake controllers, this wiring adapter will have you on your way in no time!

Features:

• Includes 2 plugs
  • 1 Plug is inserted into the back of the Hopkins Agility Brake Control Unit
  • 1 Plug is inserted into the factory-installed port under the dash
• Fits Hopkins Agility Trailer Brake Controller (HM47294)

Specs:

• Compatible with Dodge / Chrysler / Jeep vehicles
  • 1995-09 Dodge Ram pickups
  • 1997-09 Dodge Dakota
  • 1998-08 Dodge Durango
  • 2007-08 Chrysler Aspen
  • 2001 Jeep Grand Cherokee

You have a lot to think about when you are connecting a vehicle to a trailer or RV. Hopkins makes it easier with a vehicle-specific wiring adapter, designed to fit the Agility brake controller. Simply plug it in and go.

47755 Brake Control Connectors

Customers Who Purchased This Accessories and Parts Also Bought...

Ask the Experts about this Hopkins Accessories and Parts
Do you have a question about this Accessories and Parts?

• Wiring Adapter Needed to Install an Impulse Brake Controller on a 2008 Dodge Ram 1500
  
• Yes, we have the adapter that you need. To connect the Impulse brake controller to your 2008 Dodge Ram pickup you will need the Hopkins Plug-in Simple Brake Wiring Adapter - Dodge, item # HM47755. This is the vehicle specific connector and wiring along with the connector that plugs into the back of the Impulse and Agility, item # HM47294, brake controllers.
  view full answer...


• Hopkins Agility Brake Controller Display Blank with No Trailer Connected, 2008 Dodge Ram 1500
  
• On the Hopkins Agility Electric Brake Controller, # HM47294, the display will be blank with no trailer connected. With a trailer connected, you should see one red dot on the display. Take a look at the OPERATING / SETTING YOUR CONTROLLER section of the installation details linked below.
  view full answer...


• Which Wiring Adapter Do I Need For Hopkins Brake Controller Part # HM47294 on 2010 Dodge Ram Laramie
  
• The correct wiring adapter you will need for your 2010 Laramie Dodge Ram Pickup with 7-way pre-installed is the Universal Brake Control Wiring Adapter, Dodge Ram, part # 20273, which fits 2010 Dodge Ram with factory 7-way. You will plug the connector of part # 20273 into the port under the dash of your 2010 Dodge Ram, and the other end with the 4 wires will be wired to the wires coming out of the brake controller using butt connectors, part # 05732-2. The connector you referenced, Hopkin
  view full answer...


• How To Wire a Brake Controller with no Tow Package in a 05 Dodge Dakota
  
• The Hopkins Plug-in Simple Brake Wiring Adapter - Dodge, part # HM47755 is designed to be used on vehicles that have a factory tow-package. Since your 2005 Dodge Dakota does not have the tow package, you will need to connect each of the wires individually from your brake controller to your truck. I attached a link below that details how this is done. To determine which wire you will use for the brake switch, you will want to use a circuit tester like the Quickee Circuit Tester, part # 3808, t
  view full answer...


• Which Hopkins Trailer Brake Controllers Work with Plug-in Simple Brake Wiring Adapter, # HM47755
  
• The Hopkins Plug-in Simple Brake Wiring Adapter, # HM47755, for your 2008 Dodge Ram will fit Hopkins Agility, Reliance, Impulse, and Brake Force brake controllers. I have included a link to the installation details for reference.
  view full answer...


• Electric Trailer Brake Controller Port Location on a 2006 Dodge Ram 2500
  
• From what I was able to find, you will plug in the HM47755 harness in an empty slot located under the dash at the very back, between the emergency brake and steering column U-joint. It could also be up under the dash, on the left side and above some other harnesses and/or components, so it will not be in plain sight. If your 2006 Dodge Ram came with a 4-Way trailer connector and not a 7-Way, there will not be a plug present and you will need to hard wire the brake controller using 4 and 7 -Wa
  view full answer...


• Installing Hopkins Agility Brake Controller on 1999 Dodge Ram
  
• If your Ram was factory equipped with either the 4-pole or 7-way trailer connector, the wiring adapter you referenced, part # HM47755 would plug into the connector under the dash. The connector can be found on top of the white box on the firewall behind the emergency brake pedal. If your truck has the 7-way, the install will be complete. If you have the factory 4-pole, the brake output circuit is not run from the under dash connector back to the rear of the truck. You will need an adapter, pa
  view full answer...


• Hopkins Trailer Brake Controller Wiring Harness for a 2012 Dodge Ram
  
• For a 2012 Dodge Ram with either a factory 7-Way or factory 4-Way and a Hopkins brake controller, the correct wiring adapter is # 20273. This adapter plugs into the 4-pin connector on the trucks built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. The other end has blunt cut wires that will attach color for color to the Hopkins brake controller. If your 2012 Dodge Ram
  view full answer...


• Is there a Brake Controller Adapter for 2003 Chrysler Town and Country?
  
• I am sorry, you will not be able to use a brake controller adapter. You will need to hardwire a 4-way plug, part # 118376, and use the Brake Controller 7 & 4 Way Installation Kit - 10 Gauge, part #ETBC7, with your brake controller.
  view full answer...