Hopkins Accessories and Parts - HM47635
Why mess with wires and splicing, when you can plug it in? Designed to fit Hopkins Agility brake controllers, this wiring adapter will have you on your way in no time!
Features:
- Includes 2 plugs
- 1 Plug is inserted into the back of the Hopkins Agility Brake Control Unit
- 1 Plug is inserted into the factory-installed port under the dash
- Fits Hopkins Agility Trailer Brake Controller (HM47294)
Specs:
- Compatible with pre-wired Nissan and Infiniti vehicles with a tow package
- 2004-09 Nissan Armada
- 2004-09 Nissan Titan
- 2004-09 Nissan Frontier
- 2004-09 Nissan Pathfinder
- 2004-09 Nissan Xterra
- 2004-09 Infiniti QX56
You have a lot to think about when you are connecting a vehicle to a trailer or RV. Hopkins makes it easier with a vehicle-specific wiring adapter, designed to fit the Agility brake controller. Simply plug it in and go.
47635 Brake Control Connectors
Customers Who Purchased This Accessories and Parts Also Bought...
Ask the Experts about this Hopkins Accessories and Parts
Do you have a question about this Accessories and Parts?
- Hopkins Brake Controller Wiring Adapter, Part # HM47635 for 2010 Nissan Titan
- I have spoken with our contacts at Hopkins Manufacturing, who have told me that the Hopkins Plug-in Simple Brake Controller Wiring Adapter, part # HM47635 is the correct wiring adapter for your 2010 Nissan Titan.
view full answer...
- Installing Agility Brake Control HM47635 on 2010 Nissan Pathfinder with a Factory Harness
- From the Nissan description of the wire functions on the harness, it does look like you have correctly identified almost all the wire connections on your 2010 Nissan Pathfinder, except for the red wire with a light blue tracer.
On Nissan models, the red with light blue tracer would be an illumination wire, and would actually not be used in your brake controller installation. You can just tie up this wire.
You also have the electric brake and stop light wires switched. The red wire with
view full answer...
- Location of the Electric Trailer Brake Controller Connection Port on a 2004 Nissan Frontier
- From what I was able to learn, the connection point for the Hopkins Plug-in Simple Brake Wiring Adapter - Nissan, # HM47635, can be found underneath and left of the steering column, taped to another harness near the emergency brake pedal. There should be a 6-pin connector that mates with the one on the adapter.
If you cannot find this port, and the truck did not come with a factory installed 7-Way trailer connector, you will probably need to install a 4-Way (if needed), # 33515, and then inst
view full answer...
- Will the Hopkins Brake Wiring Adapter Work with Hopkins Impulse Brake Controller on a Nissan Titan
- I checked with Hopkins and yes, the Hopkins Plug-in Simple Brake Wiring Adapter # HM47635 that you referenced will work with the Hopkins Impulse brake controller and your 2004-2009 Nissan Titan.
One side of the harness will plug into the port on the back of your brake controller, and the other side will plug into the factory-installed port under your dash.
view full answer...