Features:
- Advanced technology
- Inertia accelerometer instantly activates brake
- Proportional controller mirrors the braking action of the tow vehicle
- On-the-fly sensitivity adjustment - "boost"
- Easiest to use
- Fully digital settings with large readout screen
- Flexible mounting options - self-leveling
- Innovative vertical slide for manual braking
- Short-proof protected
- Plug-in harness for quick disconnect
- Includes 2 plugs
- 1 Plug is inserted into the back of the Hopkins Agility Brake Control Unit
- 1 Plug is inserted into the factory-installed port under the dash
Specs:
- Dimensions: 1-1/4" thick x 5" long x 3" wide
- Made for up to 3-axle trailer brake systems (6 brakes)
- Operating range: -20 degrees to +70 degrees
- Unit must be pointed in the direction of travel
- 5 Digital sensitivity settings for different loads and driving conditions
- Plug-in Simple connection
- Limited lifetime warranty
Towing large trailers hinders your ability to stop quickly. Protect the investment you made in your trailer and vehicle with the Agility trailer brake control.
The Agility is a proportional brake controller, meaning the trailer decelerates at the same rate as the vehicle. This not only makes for the smoothest of stops but also the most efficient. If both truck and trailer are stopping at the same rate then the truck (or the trailer) brakes are not getting over worked and will therefore last longer. Brakes will also not be overheated after driving through traffic no power will be sent to the trailer brakes when the rig is stopped.
The Agility is designed for use with electric trailer brakes. It is not designed to operate with electric-hydraulic brake systems.
47294 Hopkins Agility Brake Controller with 47755 Plug-in Connector
Instructions
