Fulton Plastic Fender - Black - 8" to 12" Tires

Fulton Trailer Fenders - F008550

7" wide x 20-1/4" long x 6-1/4" tall. Made of high-density polyethylene, these fenders are corrosion proof, impact resistant and able to handle temperature extremes. Molded-in color means scratches are virtually invisible.

Features:

• Mounting slots for easy installation
• High-density polyethylene material - corrosion proof and impact resistant
• "Scratchproof", molded-in color - black
• Built-in fender skirt
• Made in the USA

Specs:

• Application: fits 8" to 12" tires
• Dimensions: 7" wide x 20-1/4" long x 6-1/4" tall

Dimensional Information

A	C	D	E	M3	M4	Wheel Size	Part No. - White	Part No. - Black	Part No. - Silver
Style A
7"	20.25"	6.25"	4.62"	2.25"	2.5"	8" - 12"	F008540	F008550	F008560

008550 Fulton Plastic Fender, Style A, Black, 8" to 12" Tires

Customers Who Purchased This Trailer Fenders Also Bought...

Ask the Experts about this Fulton Trailer Fenders
Do you have a question about this Trailer Fenders?

• How to Mount the Fulton Trailer Fender # F008550
  
• The Fulton Plastic Fender - Black - 8 to 12 inch Tires, item # F008550, is designed to be mounted to existing hardware or mounted with brackets designed to attach to the specific trailer frame they are being installed on. No mounting hardware is included. We do have some mounting hardware available (see link) that may work on your trailer. You will need to determine the mounting location and style of bracket that will work on your trailer.
  view full answer...


• Can the Fulton Trailer Fender # F008550 be mounted to the Sidewall of a Tear Camper Trailer
  
• You should be able to mount the Fulton Trailer Fender, # F008550, to the side of your camper trailer. Depending on the trailers construction you may need to use a mounting bracket and some carriage bolts to utilize the square attachment holes in the front and rear of the fender, or you may be able to bolt the fender directly to the side of the trailer through the fender skirt on the back side of the fender.
  view full answer...


• Will Fulton Trailer Fender # F008550 Fit a 2006 Snowbear 8000 Trailer
  
• I did a little research and found that the model 8000 Snowbear trailer had a fender that is a little different than the Fulton Plastic Fender, # F008550. The Fulton fender has a fender skirt while the Snowbear OEM one does not. If you are looking to have this style of fender with a fender skirt, then you will need to make sure there is enough clearance inside the fender for the tire so that it does not rub the fender skirt. If your tires are more than 7 inches wide, the fender will not fit.
  view full answer...


• Dimensions of Trailer Fender Mounting Area for part # F008550
  
• The flat area on the inside of the Fulton Plastic Fender, part # F008550, is 2-1/2 inches tall at its highest point and curves downward to meet the side of the fender on each end. The distance across the flat area at its lowest point is 12 inches. There are also two mounting holes on each end of the fender.
  view full answer...


• Mounting brackets for Mounting the Fulton Trailer Fenders # F008550 to a Motorcycle Trailer
  
• We carry fender mounting brackets that may work for your application. Check out the Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF775X21W (Pair), item # PF775-BKT-2. These brackets are designed for the Plastic, Single-Axle Trailer Fender - White - 8 inch to 12 inch Tires, item # PF775X21W. This style of fender is only available in white. At this time we do not have specific mounting brackets designed to work with the Fulton Plastic Fender - Black - 8 inc
  view full answer...