Fulton Grease Caps - F001524
Grease cap fits trailer hubs with 1.943" inner diameter.
Features:
- Grease cap for trailer hubs
- Drive-in installation
- 20-Gauge steel construction
Specs:
- Quantity:1
- Flange diameter: 1.943"
- Crown height: 1.04"
- Flange length: 0.34"
- Overall height: 1.38"
Dimensional Information

| Part No. | Material Gauge | Flange Diameter (A) | Crown Height (B) | Flange Length (C) | Overall Height (D) |
|---|
| 1500 Series |
| F001524 | 20 | 1.943" | 1.04" | 0.34" | 1.38" |
001524 Fulton Grease Cap, 1.943" x 0.34" Flange
Customers Who Purchased This Grease Caps Also Bought...
Ask the Experts about this Fulton Grease Caps
Do you have a question about this Grease Caps?
- Triton Grease Cap Size
- Measuring the inside diameter of the hub where the cap press fits into it is the best bet to get the right replacement grease caps. If you have access to a dial caliper, that would make the job that much easier. Measuring with a tape measure is difficult in this application. If you would like to try to find a part number and or manufacturer on your hub I would be happy to try to find the correct grease caps for your application. I am here to help let me know any information you can come up with.
view full answer...
- Do You have Grease Caps for a 1.935 Bore Diameter Hub
- If there is any corrosion built up on the hub, it could be built up corrosion built up on the hub bore making the hole read smaller.
Grease caps do not have to be very deep. They only have to go in far enough to fit snug and tight inside the hub bore. Many grease caps have a flange length of just a little over a 1/4 inch, and most are well under a 1/2 inch.
If their is a bit of corrosion, try lightly scrubbing with some steel wool. After cleaning it up, a 1.943 cap like part # F001524 shou
view full answer...