Call 800-298-8924 to order Fulton Grease Caps part number F001508 or order online at Free expert support on all Fulton products. Guaranteed Lowest Price and Fastest Shipping for Fulton Grease Cap, Zinc Plated, 2.251" O.D.. Grease Caps reviews from real customers.
view cartView Cart

Select Your Vehicle

CALL NOW - 800-298-8924

Product Experts Available Now!

Grease Caps > Standard Grease Cap > 2.25 Inch > Standard Axle > Drive-In > Fulton

Fulton Grease Cap, Zinc Plated, 2.251" O.D.

Fulton Grease Caps

(31 reviews)

Code:   F001508


Shipping Special

Shipping Weight: 0.12 pounds


Fulton Grease Caps - F001508

Grease cap fits trailer hubs with 2.251" inner diameter and has corrosion-resistant zinc plating.


  • Grease cap for trailer hubs
  • Drive-in installation
  • Corrosion-resistant zinc plating
  • Cap I.D.: 2.251"

001508 Fulton Grease Cap

Customer Reviews

Fulton Grease Cap, Zinc Plated, 2.251" O.D. - F001508

Average Customer Rating:  4.9 out of 5 stars   (31 Customer Reviews)

- F001508

by: L. B. Durham08/05/2013

as stated on you site, correct size for the wheel I have. 93392


So far the caps work as they should. The only comment I might add is that I had to modify the caps to make them fit. When I applied they, they just a shade too loose and felt like they would fall out when I put them in the water: they were on my boat trailer. So I cut the ends and spread them a little bit and they have fit since.

L. B - 02/03/2015


- F001508

by: Kevin11/03/2014

I bought this for my FWD Jeep Patriot Sport. A Jeep blog linked to this part so I ordered four. It fits PERFECTLY on the front wheels. But if you have a FWD it won't fit the back (too small). I recommend these for owners who want to remove the plastic center caps that come with the Sport version wheels. Side note: They arrive shinier than this picture portrays (a good thing). The metal finish was close to the chrome of the lug nuts. But I painted my rims black and plan to match this grease cap to them. 158959

- F001508

by: Scott B.07/11/2013

This is a hard to find cap size. Easy to order, delivered on time, and at a very reasonable price. Follow up knew it was in my mailbox before I did! Thanks. 89031

- F001508

by: Mike J12/19/2012

Worked like a champ. Exactly as advertised. I purchased a trailer with out dust caps. I replaced the bearings and races and didn't want moisture, dirt and grime getting back into the hubs. These worked great. Fit real snug and I won't fear them falling off in route. Thanks! 61813

- F001508

by: Dwayne F.10/09/2014

I was very pleased with Karen who took my order and the company, the grease caps I ordered seemed to be of good quality and very reasonable in price and reasonable S&H cost also, they arrived at my door in just a few days. I would rate them 5 out of 5. good job guys. 155294

- F001508

by: drnash09/23/2013

While there isn't much one can say about the quality of grease caps, the issue here was the size. I was unable to find one the right size in any local parts or implement stores. I was very happy to find one on etrailer at a very reasonable price. 101028

- F001508

by: MG09/11/2013

After looking for this size dust cap and being told numerous times locally that this size did not exist i was happy to find these on here. I had been unable to use my trailer for several weeks until i found them. 99391

- F001508

by: Dave Threlkeld07/04/2014

I live in the Atlanta area and thought I'd be able to find grease caps for my archaic home made utility trailer. Not so. I found them on etrailer's website. Perfect fit and a great price. Thanks etrailer! 139326

- F001508

by: Ken in Oregon05/25/2011

etrailer had the part I couldn't find at three auto parts store. Their website was easy to navigate, easy to purchase, and the discount shipping arrived fast and cheap. Thanks for the service! 15379

- F001508

by: John H08/27/2014

It is a great web site.I called for help to find new rims for my 1948 horse trailer,they had them and were just what I wanted,packing was good shipping was fast 148948

- F001508

by: Lloy P.07/02/2014

Even a small item like this was treated with utmost care. having looked around here for some time I was desperate and you came to my rescue. thanks, Lloy 138735

- F001508

by: Chuck K.12/03/2013

Had a hard time finding these bearing caps locally and was glad to find them at etrailer. Price was fair and delivery was fast. 109022

- F001508

by: Robert Downd01/04/2012

Was just what I was looking for it was hard to find at local auto parts But e trailer had it great company and great product 29078

- F001508

by: Ruben B06/23/2014

Berry good to find this uncommon size at at regular prices. I will check on you next time I need any of your products. 137152

- F001508

by: Joe R.04/11/2014

E-trailer did a great job helping me with questions and shipping was right on time. Thank you all at E-trailer. Joe R. 124642

- F001508

by: Bill J.09/04/2013

It Works, fits, was delivered in a reasonable time. I just can't say enough good things about this grease cap. 98128

- F001508

by: Mel06/07/2011

Its just what I needed. It was very easy to order. Received it within a week. Great Service....Thank you... 16297

- F001508

by: steve S09/15/2014

Found it, ordered it, got it in the mail, put it on. It could not have been easier 151093

- F001508

by: Jim12/12/2013

Fast Ship, great customer service. This is a hard to find size and they had it..!! 109959

- F001508

by: michael09/04/2013

Its a good product, found no fault with it. Does what it is designed to do. 98174

- F001508

by: Shane Gamble03/07/2011

cap worked out great,the best was purchasing a cap driver to go with it. 8666

- F001508

by: Luke06/05/2013

Not as shiny as the others I ordered but still a great grease cap. 83426

- F001508

by: Chris05/16/2014

The product is as described. Love this company. 130957

- F001508

by: Dale Dalle Nogare08/01/2013

Right item to finish the project. Looks great. 92655

- F001508

by: Sergio Diaz03/17/2014

Fast shipping and very good quality pro duct. 120995

- F001508

by: ron c06/12/2014

Very fast service, item as described. 135431

- F001508

by: Wally Baker07/11/2014

It was the right size thank you 140811

- F001508

by: Mike T.09/22/2014

Exactly what I ordered! 152497

- F001508

by: Don07/08/2013

Smooth all the way! 88173

- F001508

by: Larry G09/18/2013

No problems. 100467

- F001508

by: Arlin10/04/2013

Great 102625


Ask the Experts about this Fulton Grease Caps
Do you have a question about this Grease Caps?

  • Replacement Grease Cap for Threaded 1.98 Inch Hub Bore that are 1-1/2 Inches Tall
  • We do have a replacement grease cap/dust cover set that will replace your existing thread caps with the 1.98 diameter AND they are 1-1/2 inches from the part just before the threads out to the top of the cap. Take a look at the Bearing Buddy Bearing Protectors - Model 1980T-SS - Threaded - Stainless Steel (Pair), # BB1980T-SS. For threaded covers in the 1.98 diameter, this is the only option we carry. Bearing Buddies will keep out water and ensure there is enough grease in the hub. A definite...
    view full answer...

  • Choosing the Correct Dust Cap with a Drive-In Flange
  • At this time we do not carry a 2-1/8 inch diameter dust cap, however, we do have a few dust caps that are close to that measurement. I recommend using a precise measuring tool such as a dial caliper to measure the inner diameter of your hub bore. This will give us an exact measurement to go off of. Typically, when choosing a dust cap, you want to get an accurate measurement of the inner diameter of your hub bore and then choose a dust cap that is slightly larger. The next size dust...
    view full answer...

  • What is the Overall Height of Fulton Grease Cap, Zinc Plated, # F001508
  • I spoke with my contact at Fulton and he stated that the Fulton Grease Cap, Zinc Plated, # F001508, has an overall height of 1-1/4 inches.
    view full answer...

  • Bearing Buddy Recommendation for a 1.98 Inch Hub Bore
  • What you are looking to do is possible in theory, but we don't carry any hub/rotors that are for oil bath hubs like you are looking for so it wouldn't be a solution I could provide. The only solution I could provide for you would be to replace any lost Bearing Buddies with the # BB1980A-SS as these are confirmed to fit your 1.980 inch hub bore. You will want to make sure they are seated fully in your hubs as this is probably why your previous ones fell out. If you could find a hub/rotor...
    view full answer...

  • Choosing the Correct Grease Cap
  • At this time we do not carry a 2-1/8 inch diameter grease cap, however, we do have a few grease caps that are close to that measurement. I recommend using a precise measuring tool such as digital calipers to measure the inner diameter of your hub bore. This will give us an exact measurement as a starting point. Typically, when choosing a grease cap, you want to get an accurate measurement of the inner diameter of your hub bore and then choose a slightly larger grease cap. The next size...
    view full answer...

Do you have a question about this Grease Caps?

Info for this part was:

Photos by:
Theodore B

Expert Research:
Michael H

Expert Research:
Jameson C

At we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.

Stay Connected

Subscribe to email newsletter


privacy - we don't send unsolicited email reviews

All images, layout and content copyright