Edge EZ for Dodge Cummins 5.9L, 24V, Common Rail

Edge Performance Chip - EP30204

The Edge EZ Module can be quickly installed to provide more horsepower and torque with easy in-cab, on-the-fly power level adjustments

Edge Products EZ Module is an add-on Engine Control Module (ECM) for the Cummins 5.9L Engine that offers additional features not available on a stock engine. Since it is an "add on" ECM, it uses all the factory data, and then enhances the factory settings to optimize your truck's performance.

• In-Cab switch to provide adjustability On-the-Fly
• Adds up to 65 Horsepower
• Adds up to 150 Foot Pounds of Torque
• Can switch between 3 available power levels:
  • Level 1: 25 Horsepower - 50 Foot Pounds of Torque
  • Level 2: 45 Horsepower - 75 Foot Pounds of Torque
  • Level 3: 65 Horsepower - 150 Foot Pounds of Torque
• Increases Fuel Economy
• Helps eliminate downshifting while towing
• Maximizes efficiency by monitoring the RPM, Timing, Turbo Boost Pressure, and Fueling Parameters
• Uses engine information to control and enhance timing and fueling
• Easy installation needs no mechanic labor, no drilling, and no computer downloads.
• Completely Weatherproof

Close-up pictures of the connectors that plug into the MAP sensor and Fuel Pressure Sensor.

Edge Products EZ Module
The Cummins motor is one of the most powerful motors ever put in a pickup truck. The Edge EZ module unleashes the potential of this monster by carefully monitoring RPM, turbo boost pressure and fueling parameters and adjusting fueling to maximize power, torque and driveability.

The Edge EZ module allows maximum fueling at full turbo boost and provides an additional 65 rear wheel horsepower and an additional 150 foot pounds of torque. Simply plug the Power Edge EZ connectors into the ECM Data Link connection and MAP sensor. The Edge EZ is completely weatherproof and mounts under the hood. All data sent from the Edge EZ module is within the limits of the Bosch fuel injection pump. This enables smooth and predictable power delivery without compromising integrity.

Towing? Edge products were created for towing. Let's assume that in a stock truck you would pull your 5,000 lb load up grades in 3rd gear. Your EGT may run at 1,200 degrees F. With the EZ module on level 2, you have effectively increased horsepower by 45, and torque by 77 foot-pounds. That's like adding a fifth horse to pull a four horse carriage. This means you'll now be running the grades at a lower RPM (and therefore a lower EGT) and best of all you'll be going faster and the truck may already be in 4th gear.

Towing is usually done in power level 2. For heavy loads, power level 1 should be used. Level 3 is designed to take advantage of the built-in safety margins the manufacturer needs to add in order to make sure your vehicle can tow at its maximum capacity. Level 3 should not be used without an EGT gauge.

The EZ can also be stacked with other upgrades to deliver even more power. There is not an upgrade on the market today that can deliver as much power and install so simply.

*Legal in California only for racing vehicles which may never be used upon a highway.

Edge Products #30204

Old Part Number: EZD1000D

This Product Fits The Following Vehicles

2005 - 2007 Dodge Ram Pickup 5.9L

2004 - 2004 Dodge Ram Pickup 5.9L, 325hp Diesel

Ask the Experts about this Edge Performance Chip
Do you have a question about this Performance Chip?

• Can Edge EZ Plug-in Module Be Safely Used on a High Mileage Diesel Truck
  
• The part you were looking at will not work with your 2000 Cummins Dodge. It is for later model years. I have included a link to the proper modules below. The one that I think you would be most interested in is part # EP30400. Any time you alter the computer controls of a vehicle, there is a risk involved. Fortunately, Edge has designed their products to be simple to use and provide options for the hot-rodders and people like yourself that want a mild bump in power and fuel efficiency without
  view full answer...


• Does the Clutch or Transmission Need to be Upgraded to Use Edge EZ Programmer on a 2005 Dodge Ram
  
• According to the installation instructions for the Edge EZ, # EP30204, you do not need to upgrade the clutch or transmission to use the programmer. However, you just need to be aware that using the programmer can provide as much as 65 more horsepower and 150 more foot pounds of torque. If not managed properly the added stress could cause drivetrain problems. I have included a link to the installation details for reference.
  view full answer...


• Programmer Recommendations for a 2005 Dodge Ram 2500 with 5.9 Liter Cummins Diesel
  
• The reference to stacking it with other upgrades is referring to adding aftermarket exhaust, intake, or other similar items. A monitor cannot be added to the EZ, # EP30204. You have 2 options if you want some additional power but also want to monitor engine performance parameters. You can use the EZ and then also use the Insight CS, # EP83730. Or, you can use the Edge Juice with Attitude, # EP31003, and stay on stock mode or level 1, 2, or 3 which matches the power output of the EZ. In eithe
  view full answer...