Edge EZ for Dodge Cummins 5.9L, 24V

Edge Performance Chip - EP30200

The Edge EZ Module can be quickly installed to provide additonal horsepower and torque through easy power level adjustments

• Adds up to 65 Horsepower
• Adds up to 180 Foot Pounds of Torque
• Increases Fuel Economy
• Helps eliminate downshifting while towing
• Maximizes efficiency by monitoring the RPM, Timing, Turbo Boost Pressure, and Fueling Parameters
• Uses engine information to control and enhance timing and fueling
• Easy installation needs no mechanic labor, no drilling, and no computer downloads.
• Completely Weatherproof

The Cummins motor is one of the most powerful motors ever put in a pickup truck. The Edge EZ module unleashes the potential of this monster by carefully monitoring RPM, timing, turbo boost pressure and fueling parameters and adjusting fueling and timing to maximize power, torque, and driveability.

The Power Edge EZ is a plug-in module that maximizes engine efficiency by monitoring the RPM, timing, turbo boost pressure and fueling parameters. The module uses this information to determine and control both fueling and timing enhancements for the Bosch fuel injection pump. The re-mapping of the fueling and timing parameters is done via the CAN-BUS communication system. The CAN-BUS protocol is used to communicate between the Cummins Engine Control Module (ECM) and the Bosch fuel injection pump. All data sent from the EZ is within the limits of the Bosch fuel injection pump. This enables smooth and predictable power delivery without compromising integrity. This increase in power does not increase the exhaust smoke from a stock engine.

The Edge EZ allows maximum fueling at full turbo boost and provides an additional 65-rear wheel horsepower, an additional 180 foot pounds of torque and installs in minutes. Simply plug the EZ connectors into the ECM Data Link connection and MAP sensor. There is no need to unplug the Bosch fuel injection pump connector, it is completely weatherproof and mounts easily under the hood.

The EZ can also be stacked with other upgrades to deliver even more power. There is not an upgrade on the market today that can deliver as much power and install so simply.

*Legal in California only for racing vehicles which may never be used upon a highway.

Edge Products #30200

Old Part Number: EZD1000

This Product Fits The Following Vehicles

1998 - 2000 Dodge Ram Pickup 5.9L, Cummins ISB

Ask the Experts about this Edge Performance Chip
Do you have a question about this Performance Chip?

• Does Fuel Pump on a 1999 Dodge Ram 3500 with 5.9L Cummins Need to be Replaced to Use a Programmer
  
• On the Edge EZ, # EP30200, it is designed to work with stock equipment on a 1999 Dodge Ram 3500 with the 5.9 Liter Cummins. It is not required to replace the fuel pump or any other component to use the programmer. However, when set to the higher power levels it can be beneficial to have an upgraded pump as long as the new pump has the same output parameters as the old pump. I have included a link to the installation details for the EZ. You will see that it does not mention a need to replace t
  view full answer...