Trailer Suspension > Hangers > For Double Eye Springs > For 1-3/4 Inch Wide Spring > 9/16 Inch Diameter > 4-1/4 Inch Tall > Redline

Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole

Rating: rating rating rating rating rating
3 reviews

Code: E4139

Retail:$9.03

Price:$4.99

Shipping Weight: 2 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Redline Trailer Suspension - E4139

Hanger can be configured to work in the front, rear or center position to suspend your double-eye leaf spring or equalizer.

Features:

Configured for use as front, center or rear hanger
Provides attachment point for leaf springs
- Hanger suspends spring or equalizer from trailer frame
Fits 1-3/4" wide double-eye springs with 9/16" diameter eyes
Outside width of hanger is 2-5/16"
Works with 9/16" diameter bolt (sold separately)

E4139 Front, Center or Rear Hanger for Double Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole

Customers Who Purchased This Trailer Suspension Also Bought...

Shackle Bolt with Locknut for Double-Eye Springs - 3" Long $1.44

Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long $1.64

Shackle Strap - 2-1/4" Long $0.70

Shackle Strap - 2-5/8" Long $0.70

Shackle Strap - 3-1/8" Long $0.70

Customer Reviews - Write a review about this product

Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4 - E4139

Average Customer Rating: rating rating rating rating rating 4.3 out of 5 stars (3 Customer Reviews)

Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4 - E4139

rating rating rating rating rating by: Chris Unger03/05/2011

Is this review helpful?

Great place to deal with, fast shipping, extensive emails, and they have the product. need this extra long spring hanger and they were the only ones I could find that had it. Rebuilding a tow behind dump trailer.8514

Click to Enlarge

Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4 - E4139

rating rating rating rating rating by: Doug S09/19/2011

Is this review helpful?

The product itself is excellent, unfortunately somewhere the incorrect label was placed on 2 inch wide spring hangers and the correct appllicationfor the part number is 1-3/4". E-trailer is correcting and providing a shipping label to return the others. Slight delay but sometimes that stuff happens. No worries. The free shipping on $150 orders make up for a lot on heavy parts. 24200

Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4 - E4139

rating rating rating rating rating by: amos02/17/2011

Is this review helpful?

just what i needed 7331

Ask the Experts about this Redline Trailer Suspension
Expert Answers about Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole - E4139 Do you have a question about this Trailer Suspension?

What is the Thickness and Weight Limit of the Hanger for Double-Eye Springs, part # E4139
I spoke with my contact at Redline and he informed me that the weight capacity of the Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4 inch Tall - 9/16 inch Bolt Hole, part # E4139, is 7,000 lbs. I went out to our warehouse to measure the thickness of the metal on the # E4139 and it came out to be 3/16 inches thick. I have also included a link below to a trailer suspension review page that you might find informative also.
view full answer...

Outside Width Dimension of the Redline Trailer Hanger # E4139
I went out into our warehouse and pulled a Front/Center/Rear Hanger for Double-Eye Springs, part # E4139, and measured the outside width of it. It measures 2-5/16 inches from the outside of one side of the # E4139 to the other side. Check out the picture to the right to see this measurement.
view full answer...

Can the Center Spring Hanger Be Taller Than Front and Rear Spring Hangers On Magic Tilt Trailer
It is possible to have a center spring hanger that will be longer than the front and rear hangers. For an example I would have the Tandem-Axle Trailer Hanger Kit for Double-Eye Springs, part # APT3HD. This kit has 2-1/2 inch tall front and rear hangers and a 5-7/16 inch tall center hanger. A longer center spring hanger is normally used in conjunction with an equalizer. The equalizers are designed to transfer the load from one axle to another when the trailer goes over a bump. I am including a
view full answer...