Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Rating: 




3 reviews
Code: DTSTBM6800
Retail:$244.99
Price:$214.95
Shipping Weight: 19 pounds
Shipping SpecialSwitch easily between trailers with this adjustable, aluminum ball mount. Go from an 8" drop to a 9" rise in 1" steps, and swap 2" and 2-5/16" chrome-plated balls. Solid-Tow system prevents rattling. Tow up to 10,000 lbs.
Features:
Specs:


This Diversi-Tech Solid Tow adjustable ball mount provides solid, rattle-free towing performance. A stainless steel pin, operated by the included hex tool, extends out from the shank and tightens the ball mount in your receiver. The balls and the adjustable ball platform tighten also, eliminating movement. You'll enjoy the quiet, rattle-free towing experience.

A bolt in the side of the ball platform tightens it to the mount. When you loosen the bolt with the hex tool, you can slide the platform up or down to change the ball height. Or, you can slide the platform off and reverse it to use the other ball.

A bolt in the end of the platform tightens the ball set in place. When the bolt is removed, you can take out the ball set. Then you can easily replace the balls.
Video of Solid-Tow Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 8" Drop, 9" Rise - 10K
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
This is Diversi-Tech Adjustable Solid Aluminum Ball Mount, part number DTSTBM6800. The ball mount is made from an aircraft grade billet aluminum. It is made from a single piece of aluminum, machined down into our ball mount. It is designed to fit 2 inch by 2 inch trailer hitches. It is rated for up to 10,000 lbs trailer weight and up to 1,500 lbs tongue weight. It will provide a 9 inch rise or an 8 inch and can be adjusted in 1 inch increments. On the ball platform are 2 fixed balls. A common 2 inch and a larger 2-5/16. To attach the ball platform to our shank we are going to unlock the Allen bolt on the side and remove it. There is a second Allen bolt that locks into one of the adjustment holes on our shank, so again we are going to use our Allen key and undo this bolt from the front of the platform. We do not need to remove it, just back it out until it is flush on the inside of the ball platform. Next, we can slide it on to our ball mount, and begin to tighten the bolt down. You will know it is seated properly on one of the adjustment holes when you can get this bolt flush with the face of the ball platform. Once we have our adjustment bolt set, we will re-install our locking bolt on the side. This ball mount also uses Diversi-Tech adjusting system. The adjusting system puts tension between our ball mount and the inside of our receiver hitch to remove any hitch noise. Tighten the bolt and the adjustment pin pops out, removing any gap between the ball mount and the receiver hitch. And that is it for the Diversi-Tech Adjustable Ball Mount, part number DTSTBM6800.
Customers Who Purchased This Ball Mounts Also Bought...
Replacement parts available for this product
Average Customer Rating: 



5.0 out of 5 stars (3 Customer Reviews)




by: Bryan Snyder03/17/2011
Is this review helpful?
I ordered thie DTSTBM6800 for my GMC HD2500. The quality is great. You cannot turn the ball to the inside because the holes do not go all the way through the vertical drop beam. The rattle free screws do as advertised... prevent rattling. Unfortunatelly DT does not offer this in a 2 1/2 inch size to fit my 2011 GMC HD2500. The sleeve that comes with the truck reduces the receiver size from 2.5 inches to fit the 2 inch receiver... this is the part that rattles and drives me crazy!!! I'm currently troubleshooting to resolve this issue. 9611




by: Jason G.03/06/2011
Is this review helpful?
I'm impressed with the fit, finish, & quality of this adjustable ball mount. The adjustment is quick/easy and it doesn't rattle like most other ball mounts I've used. Another key feature for me is that this mount is constructed of aluminum. My truck is exposed to the elements of New England (excessively salted roads & living on the Seacoast), so I will never have to worry about this mount deteriorating due to rust.8635




by: Dave W.06/27/2009
Is this review helpful?
Serves my purpose very well! Execellent service and delivery. I would recommend etrailer to anyone!2057
Ask the Experts about this Diversi-Tech Ball Mounts
Do you have a question about this Ball Mounts?
Related Products...