Ball Mounts > Fixed Ball Mount > Locking Ball Mount > Rise - 1 Inch, Drop - 2 Inch > Class IV, 14000 lbs GTW > Fits 2 Inch Hitch > Solid Shank > Aluminum > Diversi-Tech

Self-Locking, Aluminum Ball Mount - 2" Drop, 1" Rise - Anti-Rattle Tensioned - 14,000 lbs

Rating: rating rating rating rating rating
1 reviews

Code: DTLBM9200

Retail:$82.99

Price:$79.95

Shipping Weight: 5 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Diversi-Tech Self-Locking Aluminum Ball Mount Review - Video

Diversi-Tech Ball Mounts - DTLBM9200

Self-locking, solid aluminum ball mount gives you a 2" drop or, when flipped over, a 1" rise. Fits balls with a 1-1/4" shank diameter. Supports tongue weight of up to 2,000 lbs and tows up to 14,000 lbs.

Features:

Solid, one-piece ball mount with built-in drop or rise lets you match the ball height of your vehicle with the tongue height of your trailer
Convenient, self-locking system locks ball mount to receiver tube
- Built-in locks can't get lost like other kinds of hitch locks
- Lock seals are double-sealed to keep out water
  - Resists corrosion
  - Requires no maintenance
- Uses pick-resistant, tube-style keys (2 included)
Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
  - Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
Made in the USA

Specs:

Fits: 2" x 2" trailer hitch receivers
Ball hole diameter: 1-1/4"
Towing capacity: 14,000 lbs
Tongue weight capacity: 2,000 lbs
Rise: 2" from the top of the hitch receiver opening
Drop: 1" from the top of the hitch receiver opening
Distance from center of hitch pin hole to center of ball: 8-1/4"
1-Year limited warranty

cut away view of DT locking mechanism in action

This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.

DT-LBM9200 Diversi-Tech Self-Locking Series 2" Drop, 1" Rise Hitch - Solid Billet Aluminum

Video of Self-Locking, Aluminum Ball Mount - 2" Drop, 1" Rise - Anti-Rattle Tensioned - 14,000 lbs

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video Demo Diversi Tech Ball Mount DTLBM9200

Diversi-Tech Self-Locking Aluminum Ball Mount Review

Video Transcript for Diversi-Tech Self-Locking Aluminum Ball Mount Review

This is a Self-Locking Aluminum Ball Mount from Diversi-Tech, part number DTLBM9200. Diversi-Tech ball mounts are made from aircraft grade billet aluminum. They are machined from a solid block of aluminum. This ball mount has a 14,000 lbs trailer weight capacity and a 2,000 lbs tongue weight capacity. When used in the position it offers 2 inches of , from the top of the shank to the top of the ball platform. When used in the rise position, it offers 1 inch of rise, from the top of the shank to the top of the ball platform. Built into the ball mount are spring-loaded, stainless steel anti-rattle balls. These balls help take out some of the noise created from the ball mount being inside your receiver hitch.

This is also one of their self-locking models. There is no need to use a hitch pin with this model, as it is built into the ball mount itself. To remove the ball mount from your vehicle, turn the lock and the pins will retract. This is a great security feature, because there is nothing sticking outside of the receiver, for potential thieves to cut off. It is also convenient, because you will not need to remember a separate pin and clip or a separate hitch lock. And that is it for the Diversi-Tech Ball Mount, part number DTLBM9200.

Customers Who Purchased This Ball Mounts Also Bought...

Chrome Trailer Wheel Lug Nut - 1/2" (Each) $0.85

10 Gauge Blue Primary Wire - per foot $0.65

Hitch Ball with 2-5/16" Diameter and Medium Shank, 14,000 lbs GTW - Chrome $21.95

Trailer D-Ring Tie Down, Bolt On 2-1/2" x 2-3/8" Surface Mount $5.99

7-Year Conspicuity Tape, 2" x 18" $2.39

Replacement parts available for this product

Diversi-Tech Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks $20.95

Customer Reviews - Write a review about this product

Self-Locking, Aluminum Ball Mount - 2 - DTLBM9200

Average Customer Rating: rating rating rating rating rating 5.0 out of 5 stars (1 Customer Reviews)

Self-Locking, Aluminum Ball Mount - 2 - DTLBM9200

rating rating rating rating rating by: Tom S.03/03/2011

Is this review helpful?

Great product, well built and light weight. Anti rattle works good. Customer service from etrailer was outstanding, YOU ROCK! Item was at my door the next day...8383

Ask the Experts about this Diversi-Tech Ball Mounts

Expert Answers about Self-Locking, Aluminum Ball Mount - 2" Drop, 1" Rise - Anti-Rattle Tensioned - 14,000 lbs - DTLBM9200 Do you have a question about this Ball Mounts?

Custom Fit Trailer Hitch