Ball Mounts > Fixed Ball Mount > Locking Ball Mount > Rise - 5 Inch, Drop - 6 Inch > Class IV, 14000 lbs GTW > Fits 2 Inch Hitch > Solid Shank > Standard > Aluminum > Diversi-Tech

Self-Locking, Aluminum Ball Mount - 6" Drop, 5" Rise - Anti-Rattle Tensioned - 14,000 lbs

Code: DTLBM8600

Retail:$99.99

Price:$89.95

Shipping Weight: 6 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Diversi-Tech Self-Locking Aluminum Trailer Hitch Ball Mount Review - Video

Diversi-Tech Ball Mounts - DTLBM8600

Self-locking, solid aluminum ball mount gives you a 6" drop or, when flipped over, a 5" rise. Fits balls with a 1" shank diameter. Supports tongue weight of up to 2,000 lbs and tows up to 14,000 lbs.

Features:

Solid, one-piece ball mount with built-in drop or rise lets you match the ball height of your vehicle with the tongue height of your trailer
Convenient, self-locking system locks ball mount to receiver tube
- Built-in locks can't get lost like other kinds of hitch locks
- Lock seals are double-sealed to keep out water
  - Resists corrosion
  - Requires no maintenance
- Uses pick-resistant, tube-style keys (2 included)
Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
  - Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
Made in the USA

Specs:

Fits: 2" x 2" trailer hitch receivers
Ball hole diameter: 1"
Towing capacity: 14,000 lbs
Tongue weight capacity: 2,000 lbs
Rise: 5" from the top of the hitch receiver opening
Drop: 6" from the top of the hitch receiver opening
Distance from center of hitch pin hole to center of ball: 8-3/4"
1-Year limited warranty

cut away view of DT locking mechanism in action

This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.

DT-LBM8600 Diversi-Tech Self-Locking Series 6" Drop, 5" Rise Hitch - Solid Billet Aluminum

Video of Self-Locking, Aluminum Ball Mount - 6" Drop, 5" Rise - Anti-Rattle Tensioned - 14,000 lbs

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video Demo Diversi Tech Ball Mount DTLBM8600

Diversi-Tech Self-Locking Aluminum Trailer Hitch Ball Mount Review

Video Transcript for Diversi-Tech Self-Locking Aluminum Trailer Hitch Ball Mount Review

This is the Self-Locking Aluminum Ball Mount from Diversi-Tech, part number DTLBM8600. Diversi-Tech Ball Mounts are made from aircraft grade billet aluminum, meaning the ball mount is machined from a solid block of aluminum. This ball mount has a 14,000 lbs trailer weight capacity and a 2,000 lbs tongue weight capacity. When used in the position, this ball mount offers 6 inches, from the top of the shank to the top of the ball platform. When flipped over and used in the rise position, it offers 5 inches of rise, from the top of the shank to the top of the ball platform. Diversi-Tech also builds in stainless steel, spring-loaded, anti-rattle balls. These balls take out some of the noise created from the ball mount being inside of the receiver hitch. This model also has Diversi-Tech self-locking system. There is no need for a hitch pin with this ball mount. The hitch pins are built in to the ball mount itself. When you need to remove the ball mount you will take the key, turn the lock, and the pins will retract, allowing you to remove the ball mount from the hitch. This is a great security feature, as there is nothing sticking outside of the hitch for thieves to cut, and it is also convenient, because you will not need to remember a pin and clip or a separate ball mount lock. And that is it for the Diversi-Tech Ball Mount, part number DTLBM8600.

Replacement parts available for this product

Diversi-Tech Re-Keying Kit for DTLBM and DTALBM Series Self-Locking Aluminum Ball Mounts - 2 Locks $20.95

Diversi-Tech Ball Mounts Reviews

Be the first to review this Ball Mounts - DTLBM8600

Ask the Experts about this Diversi-Tech Ball Mounts

Expert Answers about Self-Locking, Aluminum Ball Mount - 6" Drop, 5" Rise - Anti-Rattle Tensioned - 14,000 lbs - DTLBM8600 Do you have a question about this Ball Mounts?

Custom Fit Trailer Hitch