Ball Mounts > Multi-Ball Mount, Adjustable Ball Mount > Two Ball Mount, Locking Ball Mount > Rise - 9 Inch, Drop - 8 Inch > Class IV, 10000 lbs GTW > Fits 2 Inch Hitch > Solid Shank > Standard > Aluminum > Diversi-Tech

Self-Locking, Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 8" Drop, 9" Rise - 10K

Rating: rating rating rating rating rating
2 reviews

Code: DTALBM6800

Retail:$284.99

Price:$239.95

Shipping Weight: 19 pounds

Shipping Special

Orders of $150 qualify for free shipping.
Lowest Price Pledge

Diversitech Aluminum Adjustable Ball Mount Review - Video

Diversi-Tech Ball Mounts - DTALBM6800

Switch easily between trailers with this adjustable, aluminum ball mount. Go from an 8" drop to a 9" rise in 1" steps, and swap 2" and 2-5/16" chrome-plated balls. Self-locking system stops theft. Tow up to 10,000 lbs.

Features:

Adjustable ball mount makes it easy for you to haul different trailers
- Ball height adjusts in increments of 1" so that you can easily switch between trailers with different tongue heights
- Reversible ball platform lets you swap between 2 different-size balls
Convenient, self-locking system locks ball mount to receiver tube and ball platform to ball mount
- Built-in locks can't get lost like other kinds of hitch locks
- Lock seals are double-sealed to keep out water
  - Resists corrosion
  - Requires no maintenance
- Uses pick-resistant, tube-style keys (4 included)
Ball mount is machined from a solid piece of aircraft-grade billet aluminum
- Solid aluminum produces a lightweight yet strong ball mount
  - Avoids welds, which can cause weak points that might break
- Polished finish creates a high-quality appearance
2 Chrome-plated steel hitch balls included
Built-in anti-rattle system keeps ball mount quiet and lessens wear
- Stops movement of ball mount when no trailer is attached
Made in the USA

Specs:

Fits: 2" x 2" trailer hitch receivers
Ball diameters: 2" and 2-5/16"
Towing capacity: 10,000 lbs
Tongue weight capacity: 1,500 lbs
Maximum rise: 9" from the top of the hitch receiver opening
Maximum drop: 8" from the top of the hitch receiver opening
- Height adjustment: 1" increments
Distance from center of hitch pin hole to back of upright bar: 4-1/4"
Distance from center of hitch pin hole to center of ball: 8-1/2"
1-Year limited warranty

cut away view of DT locking mechanism in action

This cutaway view of the shank shows the locking mechanism in action. The locking pins extend out from the shank when the key is turned, locking the ball mount into the hitch.

Key in lock that locks ball platform to leg of ball mount

The ball platform locks to the ball mount with an internal lock. When you unlock the platform you can slide it up or down to adjust the ball height. You can also slide the platform off, reverse it, and slide it back on to change ball sizes.

Ball mount shank showing anti-rattle balls

The built-in anti-rattle balls prevent the shank from rattling when the ball mount isn't hooked up to a trailer, preventing movement that could cause noise and wear.

DT-ALBM6800 Diversi-Tech Self-Locking Series 8" Drop, 9" Rise Adjustable Hitch - Solid Billet Aluminum

Video of Self-Locking, Adjustable, Aluminum Ball Mount - 2 Chrome Balls - 8" Drop, 9" Rise - 10K

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Video review of diversitech adjustable ballmount AC8L

Diversitech Aluminum Adjustable Ball Mount Review

Video Transcript for Diversitech Aluminum Adjustable Ball Mount Review

This is a ball mount that uses a 2 inch and 2 5/16 ball. As you can see this is an adjustable ball mount which means that this platform here can travel up and down as necessary. Theres two locks on here that use coke machine keys, theres one up top right here. This lock controls the pin that locks it into the hitch. This lock here facilitates the adjustments up and down the shank. Well show you how the locks work starting with the hitch pin. Basically you take the key and twist it and you can see how the pin retracts when you want to slide it into the hitch. When you have it in the right spot, take the key back and it forces the pin back out. This does so on both sides. With the same key you can go down here, it pretty much works the same way, it just allows it to adjust in different increments.

We will install it in our two inch receiver hitch here, and show you how the pin works. You get it lined up and take your key, twist it, you see it comes through the hole and thats all it needs. In fact if it goes off to one side it will sit flush with or a little bit below it. That wont hurt a thing because anything that sticks past the hitch is not being used anyway. So you can tow with that being perfectly flush. Well show you the adjustments of the ball mount again as well. Like before, take your key and unlock it. Take it off and you can see you have seven indentions you can use the change the height of the ball mount. While talking about the ball mount itself you can see it has a 2 inch ball on one side and a 2 5/16 inch ball on the other. As you can see on the inside it uses the same pin and key combination, you turn it and it locks into place. The total capacity for this hitch is 1500 pounds tongue weight, and 10000 pounds gross trailer weight. Also as one final note, as a storage option you can take this part here and reverse it on the other side so it takes up less space in your storage spot. Theres an indent on the back side of it too, so you can lock it in position and it takes up less space in your tool box. Also Id like to point out the structure of this ball mount is aluminum. There you have it for part # DTALBM6800 from Diversitech.

Customers Who Purchased This Ball Mounts Also Bought...