Adapter Sleeve with Hitch Lock for Diversi-Tech 2" Locking Ball Mounts to 2-1/2" Receivers

Diversi-Tech Hitch Accessories - DTADP35

Increase the versatility of your Diversi-Tech locking ball mounts. This adapter lets you use 2" shank DTLBM and DTALBM series ball mounts in 2-1/2" receivers. Includes a long span hitch lock to secure the adapter to the receiver.

Note: Some 2-1/2" receivers are too wide for the included lock. Draw-Tite and Reese brand Titan hitches with an 18,000 lb. towing capacity and 2010 or newer GM HD 2-1/2" receivers are too wide for this lock. The lock will not fit these receivers.

Features:

• Designed to let your Diversi-Tech DTLBM and DTALBM ball mounts fit into 2-1/2" receivers
• Includes two sets of hitch pin holes
  • One set lines up with the locking pins of the Diversi-Tech ball mount
  • One set lines up with the hitch pin holes in the 2-1/2" receiver
• Includes long span hitch lock
  • Tube-style lock prevents theft, keeping the things that you attach to your hitch on your hitch
  • Long span fits 2-1/2" receivers
  • Chrome-plated steel construction ensures that your lock will look good for a long time
  • Easy-to-use design requires only a quarter-turn of the key to lock or unlock
  • Tube key lock cylinder provides better security than standard key mechanisms
    • Harder to pick
    • More difficult to duplicate keys
  • Water-tight cap keeps water out of the lock to prevent corrosion
  • High strength ball interlock design prevents false locking
  • Includes 2 keys
• Made in the USA

Specs:

• Applications: 2" Diversi-Tech locking ball mounts to 2-1/2" hitch receivers
• Overall length: 5-3/4"
• Overall width: 2-1/2"
• Inside width: 2-1/8"
• 1-Year limited warranty

DT-ADP35 Diversi-Tech Reducer Sleeve with Lock for 2" x 2" Ball Mounts to 2-1/2" x 2-1/2" Hitch Receivers

Video of Adapter Sleeve with Hitch Lock for Diversi-Tech 2" Locking Ball Mounts to 2-1/2" Receivers

Customers Who Purchased This Hitch Accessories Also Bought...

Ask the Experts about this Diversi-Tech Hitch Accessories
Do you have a question about this Hitch Accessories?

• Diversi-Tech Adapter Kit for Aluminum Ball Mounts Tow Capacity
  
• Actually, the 2-1/2 inch to 2 inch Adapter Kit for DTLBM and DTALBM Series Locking Ball mounts, item # DTADP35, does not have a tow capacity. It will not affect the tow rating of your hitch or ballmount. This adapter is specifically designed for use with Diversi-Tech Aluminum Ballmounts and Adjustable Aluminum Ballmounts.
  view full answer...


• 2 Inch to 2-1/2 Inch DTADP35 Adapter Measurments
  
• The part you selected has an overall length of 5-13/16 inches. Other pertinent measurements on the DTADP35 are 2-1/2 inches overall width, 2-1/16 inches inside width, 2-1/8 inches from one end to the center of the hitch pin hole and 1-9/16 inches from the other end to the center of the hitch pin hole.
  view full answer...


• Options for Carrying Bikes on a 1991 Chevrolet S10 with a Ball Mount Bumper and No Ball
  
• No, this adapter is designed to work with Diversi-Tech Aluminum Ball Mount and you would have no way to attach the adapter to your bumper. We carry the Curt 2 inch Bumper Hitch, # E-3S, which is a 2 inch receiver that mounts to the underside of the bumper on most step bumpers but may require some modification (see instructions link below) to mount to your S-10 Pickups bumper. If the Universal Step Bumper Hitch will not work for you, and if a bike rack that mounts to the rear bumper with
  view full answer...


• Using Adapter DTADP35 With a 2-1/2 Inch Hitch
  
• The adapter, part # DTADP35, is like a sleeve. It slips over the ball mount or drawbar. Then you simply slide the ball mount, with this adapter sleeve around it, into your 2-1/2 inch hitch. You can put a piece of masking tape on the adapter to hold it in place on the ball mount to make sliding it into the hitch a bit easier.
  view full answer...


• Is the Adapter Kit for DTLBM and DTALBM Locking Ball Mounts Just for Aluminum Components
  
• The Adapter Kit for DTLBM and DTALBM Series Locking Ball mounts, # DTADP35, is designed specifically for trailer hitch ball mounts in the DTLBM and DTALBM series. If you just need a reducer sleeve, I recommend the Titan Reducer Sleeve 2-1/2 inch to 2 inch, # 58102.
  view full answer...