Dutton-Lainson Trailer Winch - DL15103
Pulling Winch - Standard Duty - 1,100 lb
All D-L winches are built for multipurpose hauling and lifting operations.
- 1,100 lb capacity winch for horizontal pulling applications
- 7/8" drum hub diameter
- High carbon steel gears
- Permanently lubricated bearings
- Ergonomic handle grip
- Zinc TUFFPLATE finish
- Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish. Results of lab test using 5 percent neutral salt spray confirms our TUFFPLATE finish provides in excess of 500 hours against First Red Rust and in excess of 100 hours of First White Corrosion.
- Handle included
- 5 year limited warranty
- Made in the USA
| Single Speed Pulling Winch Specifications |
|---|
| Model | Rated Capacity (2) | Drum Hub Diameter | Gear Ratio | Handle Length | Max. Mechanical Advantage | Reversible Ratchet | Max. Drum Capacity - Cable (3) | Max. Drum Capacity - Strap |
|---|
| DL15103 | 1,100 lb. | 7/8" | 3.7:1 | 7" | 49 | | 3/16" x 79' | 29' |
(2) Capacity is based in direct pull on the third layer of line on the drum. Capacity is reduced as the line builds up on the drum.(3) Drum capacity based on cable size listed. (Cable is not included.) |
15103 Pulling Winch - Standard Duty - 1,100 lb by Dutton-Lainson Model DL1100A
Winches are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.
Customers Who Purchased This Trailer Winch Also Bought...
Ask the Experts about this Dutton-Lainson Trailer Winch
Do you have a question about this Trailer Winch?
- Does Duton-Lainson Hand Winch # DL15103 Require Cable Fastener # DL24361 to Secure the Cable
- Yes, you would need to get the Cable Fastener, # DL24361, to secure the cable to the winch. The winch will also require a cable if you do not already have one that will fit. I recommend Hand Winch Cable with Safety Hook, # DL24044.
view full answer...
- Recommendation for a Replacement Boat Winch for a Boat Trailer
- Dutton Lainson moved from an 800 pound boat winch and now have a 900 pound winch that I think would work well for you. Take a look at Hand Winch, # DL15002. This is a 900 pound winch with a TUFFPLATE finish that resists corrosion and would be a good choice for marine applications.
This winch can be used with either a cable or a strap. For a cable, you can use # DL24044 with fastener # DL24360. Or, if you prefer a strap instead of a cable, you can use # DL24043. I have included a link to our
view full answer...
- Recommended Winch for Loading Cars On and Off of a Flat Bed Trailer
- Pulling cars onto a trailer will undoubtedly require pulling the vehicle up an incline, which will add extra resistance to the equation. If you are pulling a rolling load, not dragging the car and no flat tires, up just a slight incline like a 3 degree slope the weight capacity of the winch can be multiplied by 6.67 times, see hand winch article, Winching on an Incline, which I have linked for you to review. A steeper incline causes more resistance and reduces the rolling load capacity of a winc
view full answer...
