Dutton-Lainson Trailer Winch - DL15002
Pulling Winch, Standard Duty - 900 lb
All D-L winches are built for multipurpose hauling and lifting operations.
- 900 lb winch for horizontal pulling applications
- 5/8" drum hub diameter
- High carbon steel gears
- Permanently lubricated bearings
- Ergonomic handle grip
- Zinc TUFFPLATE finish
- Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish. Results of lab test using 5 percent neutral salt spray confirms our TUFFPLATE finish provides in excess of 500 hours against First Red Rust and in excess of 100 hours of First White Corrosion.
- Handle included
- 5 year limited warranty
- Made in the USA
| Single Speed Pulling Winch Specifications |
|---|
| Model | Rated Capacity (2) | Drum Hub Diameter | Gear Ratio | Handle Length | Max. Mechanical Advantage | Reversible Ratchet | Max. Drum Capacity - Cable (3) | Max. Drum Capacity - Strap |
|---|
| DL15002 | 900 lb. | 5/8" | 3.2:1 | 7" | 55 | | 3/16" x 40' | 16' |
(2) Capacity is based in direct pull on the third layer of line on the drum. Capacity is reduced as the line builds up on the drum.(3) Drum capacity based on cable size listed. (Cable is not included.) |
15002 Pulling Winch, Standard Duty - 900 lb by Dutton-Lainson Model DL900A
Winches are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present
Customers Who Purchased This Trailer Winch Also Bought...
Ask the Experts about this Dutton-Lainson Trailer Winch
Do you have a question about this Trailer Winch?
- Winch Recommendation for a Personal Water Craft (PWC) Lift
- There could be any number of brand winches on your personal water craft lift. The winch should have some sort of serial number and/or a manufacturer on it somewhere on in the owners literature for the lift. If you cannot find this information, I may be able to determine what winch is used based on the model and manufacturer of the lift itself.
You could also use a different brand winch provided that it has the same mounting hole pattern as the existing winch. You will need to measure the cent
view full answer...
- Winch Recommendations for Lifting Canoes and Kayaks to Storage Position
- For lifting and storing your canoes and kayaks, you will want to use either a worm gear or a brake winch. Worm gear and Brake winches, see links, prevent runaway loads, and do not have a free spool mode.
The pulling winch you selected would not be the best choice for your application, because it could potentially release the load if not operated safely.
I would recommend a worm gear winch for ease of operation. The Dutton-Lainson Worm Gear Hand Winch, # DL10950, or # DL10954, would be a gr
view full answer...
