Dutton-Lainson Trailer Winch - DL10974
Worm Gear, Loop Drive - 2,000 lb
Applications requiring safe, controlled movement of loads need the D-L worm gear winch. The reel automatically stops turning whenever cranking is stopped. There is no free wheel mode, no special mechanism required to stop gear movement and they do not require a minimum load for operation.
- Capacity: 2,000 lbs.
- Capacity is based on direct line pull on the first layer of line on the drum. Capacity is reduced as line builds up on the drum
- Laminated high carbon steel gears are heat treated for longer life
- Heavy gauge embossed steel base for extra strength
- Permanently lubricated bearings on drive shaft are maintenance free
- Loop drive allows the Winch to be mounted out of reach and operated with an extension pole fitted to engage the loop
- Heavy duty 1/2" variable speed drill may speed up operation
- Powder coated copper bronze finish
- 5 year limited warranty
- Made in the USA
All D-L winches are built for multipurpose hauling and lifting operations. They are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.
| Worm Gear Specifications |
|---|
| Model | Winch Description | Rated Capacity (1) | Drum Hub Diameter | Gear Ratio | Handle Length | Max. Mechanical Advantage | Max. Drum Capacity - Cable (2) |
|---|
| DL10974 | Reg. Drum Loop Drive | 2,000 lb. | 1-1/2" | 40:1 | -- | -- | 9/32" x 49' |
(1) Capacity is based on direct line pull on the first layer of line on the drum. Capacity is reduced as line builds up on the drum. (2) Drum capacity shown is based on cable size listed. (Cable not included.) |
10974 Worm Gear, Loop Drive - 2,000 lb by Dutton-Lainson Model WG2000LD
Ask the Experts about this Dutton-Lainson Trailer Winch
Do you have a question about this Trailer Winch?
- Unspooling or Reversing of Hand Winch with Loop Drive DL10974
- This hand winch has a worm gear, which when turned, turns the gear. It cannot be reversed by the load, but simply stops when you stop turning. The reel will not unspool with added weight since there is no free spool mode. Just make sure the you don't go over the capacity of the winch and you should be fine.
view full answer...
- How to Reverse the Winch Strap Feed from Top to Bottom on a Worm Gear or Standard Trailer Winch
- To get the cable to come off of the Dutton-Lainson Worm Gear Hand Winch, item # DL10974, you would need to crank the winch until the cable is all the way unwound from the winch drum and then continue cranking in the same direction until the cable is wound back onto the drum in the opposite direction it was wound before. This will reverse the feed of the cable from top to bottom or vice versa and will also reverse the direction the handle needs to be turned to winch a load with the winch.
If y
view full answer...
