Dutton-Lainson Trailer Winch - DL10952
Worm Gear, Split Drum Handle Drive - 1,500 lb
Applications requiring safe, controlled movement of loads need the D-L worm gear winch. The reel automatically stops turning whenever cranking is stopped. There is no free wheel mode, no special mechanism required to stop gear movement and they do not require a minimum load for operation. The split drum will allow cable to pull from opposite directions.
- Capacity: 1,500 lbs.
- Capacity is based on direct line pull on the first layer of line on the drum. Capacity is reduced as line builds up on the drum
- Laminated high carbon steel gears are heat treated for longer life
- Heavy gauge embossed steel base for extra strength
- Permanently lubricated bearing on drive shaft are maintenance free
- Handle drive
- Heavy duty 1/2" variable speed drill may speed up operation
- Split reel allows operation of 2 lines for greater versatility
- Powder coated copper bronze finish
- 5 year limited warranty
- Made in the USA
All D-L winches are built for multipurpose hauling and lifting operations. They are not to be used as hoists for lifting, supporting or transporting people, or for loads over areas where people can be present.
| Worm Gear Specifications |
|---|
| Model | Winch Description | Rated Capacity (1) | Drum Hub Diameter | Gear Ratio | Handle Length | Max. Mechanical Advantage | Max. Drum Capacity - Cable (2) |
|---|
| DL10952 | Split Reel Handle Drive | 1,500 lb. | 1-1/2" | 30:1 | 7" | 240 | 1/4" x 43' (21-1/2' per side) |
(1) Capacity is based on direct line pull on the first layer of line on the drum. Capacity is reduced as line builds up on the drum. (2) Drum capacity shown is based on cable size listed. (Cable not included.) |
10952 Worm Gear, Split Drum Handle Drive - 1,500 lb by Dutton-Lainson Model WG1500SR
Ask the Experts about this Dutton-Lainson Trailer Winch
Do you have a question about this Trailer Winch?
- Can Split Reel Worm Gear Hand Winch, # DL10952 be Used to Secure a Tractor in a Trailer
- The Dutton-Lainson Worm Gear Hand Winch with Split Reel, # DL10952, is not designed to secure the tractor and is not rated for this type of application.
I would use ratchet straps like the Erickson Re-Tractable, Ratcheting, Bolt-On Tie-Down Strap (2 Pack), # EM31319, to secure the tractor in the trailer. I have included a link to a video review of these straps below. These straps will work well for securing loads but should not be used to hoist or pull the tractor into the trailer.
view full answer...
- Availability of a Two Way Trailer Winch with Braking, Low Gear Ratio, and Top Wind Handle
- A worm gear winch is what you will need. The closest gear ratio to what you are looking for is going to be 30 to 1 though. That is because of the nature of worm gear winches. They are designed for controlled movements of heavy loads. The downside in this case is that you have to turn the handle 30 times for 1 revolution of the drum. However, for the Dutton-Lainson Worm Gear Hand Winch with Split Reel for 2 Cables, # DL10952, that you have referenced, you can use a heavy duty 1/2 inch variable sp
view full answer...
- Load Rating Clarification for the Split Reel Worm Gear Hand Winch # DL10952
- The Overall weight limit for the Dutton-Lainson Worm Gear Hand Winch with Split Reel, item # DL10952, is 1500 lbs.
Winch capacity is based on direct line pull on the first layer of line on the drum. Capacity is reduced as line builds up on the drum. For each additional layer, the capacity is reduced by an additional 10 percent.
We cannot recommend exceeding the weight capacity rating of any of the winches that we carry.
We have an informational article on winches that you may find hel
view full answer...
