Derale Engine Oil Coolers - D15505
16-5/8" Wide x 7-5/8" tall x 3/4" deep, efficient, tube-and-fin cooler core comes with a sandwich adapter and all necessary installation hardware, making it easy to prolong the life of your engine and improve its overall performance.
Features:
- Prolongs life of engine oil, reducing number of necessary changes
- Improves overall functioning and performance of engine
- Reduces oil temperature by as much as 50 degrees
- Cools effectively through use of tube-fin core
- Provides external lines, via sandwich adapter, for simple installation of oil cooler without having to reposition oil filter
- Includes:
- Tube-and-fin cooler core
- Sandwich adapter
- High-temperature, high-pressure rubber hose with stainless steel clamps
- Brass hose-barb adapters
- Multiple sleeve nuts to ensure proper thread size
- Complete mounting kit
- Made in USA
Specs:
- Heat exchanger:
- Dimensions: 16-5/8" wide x 7-5/8" tall x 3/4" deep
- Distance between inlets: 6-1/4"
- Core width: 13-7/8"
- Sandwich adapter:
- Inlet/Outlet ports: 3/8" NPT
- O-ring diameters: 2-3/4" and 3-1/2"
- Engine filter thread size: 3/4"-16, 13/16"-16, 18 mm x 1.5 mm, 20 mm x 1.5 mm and 22 mm x 1.5 mm
- 1-Year warranty
Perhaps the simplest type of heat exchanger, the tube-fin effectively cools a variety of automotive systems. The concept is simple: Fluid cools as it travels through the core by transferring heat out to the fins. The fins then provide the surface area necessary for sufficient heat exchange to take place, allowing the heat pulled from the fluid to dissipate into the surrounding air. The result is longer-lasting oil and a better-functioning engine.
The sandwich adapter in this kit provides the external oil lines necessary to install a cooler without requiring you to move the factory spin-on oil filter, making it even easier to extend the life of your vehicle's engine. In addition, the thermostatic bypass feature allows oil cooler than 180 degrees to bypass the heat exchanger, so your engine will warm up faster.
15505 Derale Tube and Fin Engine Oil Cooler Kit with Sandwich Adapter, Type A
Ask the Experts about this Derale Engine Oil Coolers
Do you have a question about this Engine Oil Coolers?
- What Transmission Cooler Kit is Best for a 2001 Saturn L300
- The D15505 is a bit larger than what a 2001 Saturn L300 would need or could fit. There are 5 recommended kits for your L300 based on the vehicle size and towing capacity. I have added a link to them below.
Transmission kits are not vehicle specific. However, you need to make sure you have space to accommodate the cooler. On each of the cooler pages, you can find the dimensions of the cooler. Measure the space on your vehicle where you would like to mount the cooler and make sure you have enou
view full answer...
- Engine Oil Cooler Recommendation for a Pre-1980 Chevy 350 Small Block
- The 1958-1980 Chevrolet oil filters had 13/16 inch-16 thread sizes and used a gasket that have a diameter of 3-1/2 inches. The Derale Tube-Fin Engine Oil Cooler Kit # D15505 that you referenced would be the correct choice for you since it has components that will fit both of those requirements.
view full answer...
