Derale Transmission Coolers - D13950
12-3/4" Wide x 9-3/8" tall x 4-5/16" deep, remote cooler assembly features a high-efficiency, plate-and-fin heat-exchanger core with a 500-CFM tornado fan for maximum airflow, ensuring optimum performance for your automatic transmission.
Features:
- Improves performance and overall functioning of transmission
- Has highly efficient, plate-fin cooler core for optimum heat transfer and minimum pressure drop
- Offers superior airflow with 500-CFM, reversible tornado fan
- Mounts anywhere with aluminum mounting brackets
- Includes:
- Complete cooler assembly
- Aluminum AN fittings
- Brass hose-barb adapters
- 10' OEM spec hose with stainless steel clamps
- Additional compression fittings
- 180-Degree, in-line thermostat for power-saving fan shut-off
- Insta-dapt radiator adapter
- All necessary mounting hardware
- Made in USA
Specs:
- Inlets: -6 AN
- Adapters: -6 AN x 3/8" hose barb
- Overall dimensions: 12-3/4" wide x 9-3/8" tall x 4-5/16" deep
- Distance between inlets: 8-9/16"
- Mounting dimensions: 4" tall x 11-5/8" wide
- 1-Year warranty
Note: The Derale Insta-dapt radiator adapter fits most vehicles with 5/16" transmission lines, but not all. In some cases, additional fittings or alteration of the OEM lines or hoses may be required for installation.
With a fan-mounted heat exchanger unit, you can be sure that there will always be optimum airflow for your engine oil cooler no matter where your cooler is mounted or what sort of environment you are traveling through. Couple that with the highly efficient, plate-fin core - wherein finned chambers provide increased surface area, allowing superior heat transfer with minimum pressure drop - and you have a truly effective heat-exchange system.
This system is ideal for late-model, electronic overdrive transmissions in which ensuring proper cooling and pressure maintenance is of the utmost importance.
13950 Derale Atomic-Cool Remote Transmission Cooler with Installation Kit
Ask the Experts about this Derale Transmission Coolers
Do you have a question about this Transmission Coolers?
- Transmission Cooler Options and Installation for a 2009 Chevy Equinox Pulling a 2,800 Pound Trailer
- I am not sure what, if any, benefit new cooler lines would offer. But the right transmission cooler will do the trick. If your 2009 Chevy Equinox has the 3.4 liter engine, we have several options.
I recommend the Derale Transmission Cooler, # D12901. This has the simplest, tube fin design. It is fairly small so it should be easy to find the best mounting point.
There are essentially three places to mount a transmission cooler. The best place is between the grille and AC condenser core. T
view full answer...
- Do Inlet And Outlet Ports Need To Be Mounted In A Particular Direction On Derale Cooler, # D13950
- The ports on the Derale Atomic-Cool Remote Transmission Cooler Kit w/ Fan, # D13950, do not need to be mounted in any particular direction. The transmission cooler is not directional so having the inlet on the top or bottom does not matter. You will want to choose the inlet or outlet port location by what will make your installation easier.
Since this cooler comes with a fan-mounted heat exchanger you can mount the exchanger wherever you want because the fan will provide optimum airflow.
view full answer...
- Can a Remote Transmission Cooler be Used in Place of a Factory Cooler on a 2005 Nissan Pathfinder
- Basically, an aftermarket transmission cooler is used as a supplemental system and not a primary unit. But, when a leak like what you are describing does happen, the options are to bypass the factory cooler and plug the radiator so it does not continue to leak, or replace the radiator.
You could use the Derale Remote Cooler, # D13950, that you have selected. You would need to plug the transmission line inlet and outlet, so the OEM trans cooler could fill with fluid without leaking out. Draini
view full answer...
