Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient

Derale Transmission Coolers - D13502

11" Wide x 7-1/4" tall x 7/8" deep, efficient heat exchanger will prolong the life of your transmission and improve its overall performance. Specifically designed for vehicles with late-model, electronic overdrive transmissions.

Features:

• Prolongs life of transmission
• Improves overall performance
• Prevents heat-related failures
• Has furnace-brazed aluminum construction and 3/4" wide turbulator plates for more efficient cooling
• Includes complete mounting kit, OEM spec hose with stainless steel clamps and Insta-dapt radiator adapter
• Recommended for mid-size cars, trucks and SUVs

Specs:

• Inlets: 11/32" hose barb
• Overall dimensions: 11" wide x 7-1/4" tall x 7/8" deep
• Distance between inlets: 10-1/4"
• Mounting dimensions: 6-1/8" tall by either 5-1/4" or 6-3/4" wide
• 1-Year warranty

Note: The Derale Insta-dapt radiator adapter fits most vehicles with 5/16" transmission lines, but not all. In some cases, additional fittings or alteration of the OEM lines or hoses may be required for installation.

One of the more popular cooling systems available, the radiator-style, plate-and-fin heat exchanger provides increased surface area so that fluids can spread out along the finned chambers to cool faster. In addition to the increased surface area, this cooler also features turbulator technology, whereby fluids are agitated continuously, not only to facilitate heat transfer, but also to prevent any undesirable drop in pressure.

13502 Derale Series 8000 Plate and Fin Heat Exchanger with Installation Kit
Hidden Hitch # HH41310
Hayden Automotive # 677

Video of Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient

Customers Who Purchased This Transmission Coolers Also Bought...

Ask the Experts about this Derale Transmission Coolers
Do you have a question about this Transmission Coolers?

• Can Parts Be Added To a 2005 Chrysler Town and Country to Increase The Towing Capacity
  
• In short, no; adding a transmission cooler and distributing trailer weight does not constitute a tow package. Transmission coolers do not add to the tow capacity of the vehicle. They can reduce wear and tear on transmissions used for towing by keeping heat levels down, but they do not make the transmission capable of pulling more weight. Tow packages often include things like a heavier suspension, integrated hitch, wiring, stronger transmission, stronger/braced frames, and the larger of the a
  view full answer...


• What are Transmission Coolers Made Out Of
  
• Transmission coolers are not made out of stainless steel, they are made out of aluminum and copper because the cooler needs to transfer heat away from the transmission fluid and metal as quickly as possible and aluminum and copper are the most efficient metals for this process. Stainless steel tends to hold heat rather than dissipate it quickly as aluminum does. I have attached links to some information on transmission coolers that may be helpful also.
  view full answer...


• Transmission Cooler Recommendation for a 2008 Honda CRV
  
• I would recommend the Derale Series 8000 Plate-Fin Transmission Cooler Kit, item # D13502, for your vehicle and the towing that you will be doing. We have a video of the installation (see link) on a 2006 model CR-V and it is a rather simple install once you get the front fascia out of the way.
  view full answer...


• Is There a Transmission Cooler Available for the 2009 Ford Escape
  
• Transmission coolers are not vehicle specific. So you will have to measure the three areas mentioned below and then find one that fits in one of those areas. 1) Mount cooler between your vehicles grille and the AC condenser core for the greatest efficiency. 2) Mounting the cooler between the condenser and the radiator still allows for ample airflow, but cuts effectiveness by 25 percent. Installation of a larger cooler unit in this position may help make up for that loss. 3) Mounting the co
  view full answer...


• Does a Transmission Cooler Require a Professional Install
  
• Transmission coolers are universal fit items. As long as you have space in front of your radiator to accommodate this cooler then it will fit. The dimensions of the cooler are 11 inches wide, 7-1/4 inches tall and 7/8 thick. A person with average mechanical ability should be able to install a transmission cooler with little difficulty. It may be necessary to use a jack and jack stands to gain access underneath the car and as always, use proper safety practices when jacking and working under
  view full answer...


• Installing Derale Series 8000 Transmission Cooler D13502 on a 2002 Dodge Grand Caravan
  
• Yes, I would be happy to give you an explanation on the installation procedures for installing a transmission cooler. Installing a transmission cooler on your 2002 Dodge Grand Caravan, like the Derale Transmission Cooler, # D13502, is not as difficult as it perhaps sounds. There are three possible mounting points for the cooler, and it plugs in line with the hoses already on the vehicle. If you have enough space, the most efficient mounting location is between the vehicles grille and the AC c
  view full answer...


• Does a 2008 Pontiac Torrent Require a Transmision Cooler to Pull a Camper Under the GTW Limit
  
• You would use a transmission cooler if, when towing your trailer, your transmission fluid is above 200 degrees Fahrenheit. However, if the manufacturer says not to install one, then you need to follow their recommendation. There could be any number of reasons why an aftermarket transmission cooler should not be installed. It might not fit anywhere, depending on where mounted it could block the engine cooling system too much, or the vehicles just have not been tested for one. If they did not give
  view full answer...


• Recommended Transmission Coolers for a 2001 Ford F-250 Super Duty 7.3 Liter V-8
  
• Transmission coolers are not vehicle specific, but there are some that are recommended for your 2001 Ford F-250. The Derale, # D13502 is one of them. Basically, regardless of a super cool feature, you will need to choose a transmission cooler based on where you can mount it. The most efficient place is between the grille and AC condenser core(position A on the picture to the right). The second most efficient place is between the condenser and radiator(position B). In this position, it will be
  view full answer...


• Recommended Transmission Cooler and Installation on 2003 Mazda MPV and Will it Block Airflow
  
• Transmission coolers are universal fit items, if you have space in front of your radiator then it will fit. The installation can be done with average mechanical ability. On the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13502 the overall dimensions are 11 inches wide x 7-1/4 inches tall x 7/8 inches deep. On the Derale Series 8000 Plate-Fin Transmission Cooler Kit # D13504 the overall dimensions are 11 inches wide x 12 inches tall x 7/8 inches deep. If after measuring your cle
  view full answer...


• What Size Transmission Cooler would be Best for a 2005 Toyota Avalon Towing 1500 Pounds
  
• A Class II or a Class III Transmission cooler would be sufficient. You could use the D13502 that you were looking at, but it may be a bit big or cumbersome to fit and install easily. I would probably use the Class II, part # D13501 from Derale. It is a bit smaller, 11 inches wide, 5-3/4 inches tall and 7/8 of an inch thick. Make sure you have room either in front or behind your radiator for this cooler to lay flat against. I have also added a link to a video of a cooler being installed on a 2
  view full answer...


• Will Derale Transmission Cooler, # D13502, Fit On 2005 Honda Odyssey EXL
  
• The Derale Transmission Cooler, # D13502, is rated for your 2005 Honda Odyssey EXL. It is a universal fit application and has dimensions of 11 inches X 7-1/4 inches tall X 7/8 inches deep. So you would need to measure on your Honda Odyssey to make sure you will have clearance for this transmission cooler. There are three possible mounting points for the cooler, and it plugs in line with the hoses already on the vehicle. If you have enough space, the most efficient mounting location is be
  view full answer...


• Installing a Transmission Cooler In Line with Factory Transmission Cooler on a 2006 Dodge Caravan
  
• When installing a transmission cooler, it is recommended to install the aftermarket transmission cooler in line with the factory cooler and not remove the factory cooler. In this case, you would have the factory system run to the Derale Transmission Cooler, # D13502, and then to the transmission. The pump would still work as it normally would, there would just be a little more fluid in the system. There are essentially three places to mount a transmission cooler on your 2006 Dodge Caravan. Th
  view full answer...


• How to Install a Transmission Cooler on a 2005 Ford Expedition
  
• The lines you traced from your transmission run to a small transmission cooler built into the radiator. It is a separate compartment from the engine coolant that runs through the rest of the radiator. You can cut these lines if you do not wish to use the factory cooler but I do not recommend it because transmission fluid cannot be overcooled. Most people retain this factory cooler. The fluid path needs to flow from transmission, to factory cooler, to your new Derale cooler and back to the tra
  view full answer...


• Is a Transmission Cooler and a Power Steering Cooler Required to Tow with a 2003 Honda Pilot
  
• A transmission cooler is a good idea when you are towing with your 2003 Honda Pilot. A power steering cooler would help extend the life of the power steering pump, but it is not a necessity when towing. For a transmission cooler, the best place to mount it would be in front of the AC condenser core for maximum efficiency. In this location, a Class II cooler like # D13502, that you have referenced would work well. Transmission fluid cannot be over-cooled but with the extra capacity in the syst
  view full answer...


• What Fittings Are Available For Connecting A Transmission Cooler To A 2007 Chevrolet Tahoe
  
• Here are some of the fittings that I have available that are used to connect a transmission cooler to a radiator on a 2007 Chevy Tahoe. You might want to try and measure the fitting size that is on your vehicles radiator. The Derale Insta-Dapt Radiator Adapter, # D13004, is used in the transmission coolers that we sell. It is a radiator adapter that fits most vehicles with 5/16 inch transmission lines. The Derale Radiator Adapter Fittings for GM, # D13018, are 5/8 inch inverted flare fitti
  view full answer...


• Do the Derale Transmission Coolers like Part D13502 Have a GVWR for Determining Cooler Size
  
• There is not a gross vehicle weight rating provided for the Derale transmission coolers. There are more factors than just weight that should be taken into consideration when selecting a transmission cooler. If you write back and let me know what vehicle the cooler would be for, what you will be towing and road conditions, hot and hilly or cool and flat, I can help you figure out which cooler or coolers would suit your needs.
  view full answer...


• Do I Need To Add Transmission Cooler To 2010 Chevy Silverado 1500 2WD LT 5.3L V8 With Factory Cooler
  
• Installing an additional transmission cooler in-line with the current transmission cooler would help in cooling the transmission fluid. The item you selected, the Derale Series 8000 Plate-Fin Transmission Cooler Kit, part # D13502, would be a good choice as it will fit your 2010 Chevy Silverado 1500. To install Part # D13502, you will also need the Derale Snap-In Radiator Adapter Fitting, part # D13035. I would recommend finding a spot in front of the radiator, behind the front grille of the
  view full answer...


• Recommendation for a Transmission Cooler for a 4 Cylinder 2009 Toyota Highlander
  
• You can install a transmission cooler on your 2009 Toyota Highlander, even though the ones recommended are for the larger 3.3L engine. Because you have the 4 cylinder model that does not come up in the fit guide, I spoke with my contact at Derale for some recommendations. Take a look at the Derale Series 9000 Plate-Fin Transmission Cooler Kit with NPT Inlets - Class IV - Extra Efficient, # D13613. You will just need to make sure the fittings on your Highlander match the fittings included wit
  view full answer...


• Transmission Cooler Options for a 1994 Chevrolet C/K 1500
  
• We carry numerous transmission coolers that are recommended for your 1994 Chevy C/K 1500. The determining factor on which is the best for your particular truck is the size engine it has and how much space there is to mount it in the location you want. I have included a link to the available coolers below. Each cooler comes with the necessary fittings for installation. We also carry various other fittings separately, should you need additional parts when installing the cooler. I have included
  view full answer...


• Is a Transmission Cooler Needed to tow an 1800lb Camper with a 2009 Subaru Forester
  
• A transmission cooler is not necessarily mandatory for towing, but you will definitely want to check your owners manual to see if there are any stipulations from Subaru saying a cooler is required. You will sometimes see that the vehicle manufacturer requires a transmission cooler be installed for towing purposes, just to retain the vehicle warranty. The Derale Transmission cooler # D13502 would be a good choice for your 2009 Subaru Forester. It would work well for your application, even
  view full answer...