Tube Stainless Steel Trailer Hitch Receiver Step for 1-1/4" and 2" Trailer Hitches

Video Transcript for Bully Round Tube Trailer Hitch Receiver Steps Review

We have part # CR-605 which were going to show you some of the aspects of that. As you can see this tube cover is convertible from a 2 inch to 1-1/4 inch receiver hitches. As you can see on the right here we have a sleeve that will convert it up to 2 inch receiver. Also you can see it has three positions for adjustablility. So depending on the space between your hitch and bumper, you can extend it out to have clearance or push it all the way in if you can. Also this tube cover comes with a wedge which gets adhered to the shank and it keeps it from rattling on a looser fitting hitch. Some will require this bushing while others will not. Well now show you how this looks on a typical hitch. Now well show you how the bush gets typically used. Now well cover part # CR-605LED, with this step unit you can actually see one additional feature: it has a row of LED lights.

This light will come on when you have your running lights on, and it will come on brighter when you hit your breaks. It will work like a third brake light on the back of the vehicle and now you have one nice and low and more towards the rear. The wiring on this tube set hooks up to your truck via four pole flat which is very common on most vehicles. Well plug it up and show you the features. You can see theres plenty of leader there depending on where your four pole is located on your vehicle, so it should really help out in adaptability. A couple other things about these tube covers is constructed of T304 stainless steel and has a high impact plastic step pad on top. First well show you the running lights and there intensity. Now well show you the brake lights on and off. This is a great accessory to have for your pickup, if you want to reach in over your tailgate quickly and reach in and grab what you need. Also if you have a SUV and you store stuff on the top rack this is great for reaching up there and grabbing your stuff. There you have it for part # CR-605, and CR-605LED the tube covers from Bully.