Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
This stainless steel hitch cover is perfect the avid golfer. The sleek design includes a hitch pin and lock to secure the cover to your hitch and prevent theft. The hitch cover is designed to fit either an 1-1/4" or 2" hitch and is rust proof, so that it can be enjoyed for many years to come.
Stainless Steel Golf Club with Golf Ball Trailer Hitch Cover by Bully
Video of Golf Club Stainless Steel Trailer Hitch Cover with Lock
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are going o be showing you part number CR-418. This is the Golf Club Stainless Steel Trailer Hitch Cover with an accompanying lock. Now, this fits both an 1-/14 and 2 inch hitches and it also has great random bushings to fir your hitch better. It also comes with its own lock to insure it is secure as you are traveling, to make sure nobody walks off with it. It is constructed from a rust proof stainless steel and includes a hitch pin and lock. It is designed to fit both an 1-1/4 and 2-inch trailer hitches. And the hitch cover face is 8 inches wide by 4 inches tall. This is for anybody that is a big fan of golf, who likes to show it off as you drive.
Now, we will go ahead and show off some of the pieces here. This would be the lock right here. It fits in like so, push this through and it locks it into place. And this is the bushing so it fits either an 1-1/4 or 2-inch hitch for the lock. This is the actual hitch cover itself. We have attached the hardware so it will fit a 2-inch hitch at the moment. This is the hardware, here, that you would attach so it would fit an 1-1/4 inch and it would fit on like so and screw in. And these are the bushings here that insure a better fit to the hitch. OK, we are just going to place this in a vehicle and show you how it fits in. And there you have it for part number CR-418. This is the Golf Club Stainless Steel Trailer Hitch Cover with a lock, from Bully.
Customers compare CR-418 to these similar products
Customers Who Purchased This Hitch Covers Also Bought...
Average Customer Rating: 
1.8 out of 5 stars (4 Customer Reviews)
by: Dan01/28/2013
Is this review helpful?
Avoid this. It looks good but it is cheaply made. It needed assembly with 4 machine screws. One of the 4 machine screws included was too small so I to track down a replacement. The screw holes did not come threaded so tightening the screws created the threads. This was fairly difficult given the screws are on the inside of the shaft. Once summer rolls around, I look forward to many minutes using this hitch cover until it falls apart.64351
by: Joan01/14/2013
Is this review helpful?
Liked the look of the hitch cover but could not get the lock to fit so use a different lock.62857
by: Bill E.08/24/2011
Is this review helpful?
Was a little let down by this product. It looked much heavier built in the picture. It was actually very thin metal and plastic when it arrived.22702
by: George P11/14/2011
Is this review helpful?
item was not stainless steel. also item was too big. 26929
Ask the Experts about this Pilot Automotive Hitch Covers
Do you have a question about this Hitch Covers?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
