CE Smith Tie-Down Bracket for Boat Trailers - Galvanized Steel - Bolt On - Qty 1

CE Smith Boat Trailer Parts - CE26214G

Create a fixed-position tie-down point on your boat trailer with this heavy-duty mounting bracket. It bolts onto your trailer and provides a 45-degree mounting angle. Made of corrosion-resistant galvanized steel.

Features:

• Creates a fixed-position tie-down on your trailer
• Bolts to trailer's frame, wall or floor
  • Mounting hardware not included
• 45-Degree mounting angle accommodates most tie-down applications
• Constructed of galvanized steel - long-lasting and corrosion resistant
• Made in USA

Specs:

• Quantity: 1 bracket

The 45-degree mounting angle of this bracket makes it simple to attach a rope or to hook up straps by spacing the anchor away from the wall or floor, proving easy access to the tie-down hole.

Galvanized Steel

Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.

26214G Galvanized Steel Tie Down Bracket by CE Smith

Customers compare CE26214G to these similar products

CE Smith Bolster and Swivel Bracket Assembly for Boat Trailers - Galvanized Steel - 9" - Qty 1$7.99

Erickson Eye Tie-Down Anchor for Boat Transom or Bow - Stainless Steel - Qty 1$4.89

Erickson U-Bolt Eye Tie-Down Anchor for Boat Transom or Bow - Stainless Steel - Qty 1$8.99

CE Smith Bow Roller Bracket for Winch Stands - Pre-Galvanized Steel - 13-3/16" Tall - Bolt On$12.99

CE Smith Winch Stand - Pre-Galvanized Steel - 30" Tall x 2" Wide$36.95

Customers Who Purchased This Boat Trailer Parts Also Bought...

Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot $1.21

Primary Wire - 16-Gauge - White - per Foot $0.13

CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1 $0.45

Pal Nut for Steel Roller Shaft (Qty 1) $0.55

Stainless Steel Hex Lag Screw - 3/8" $0.70

Ask the Experts about this CE Smith Boat Trailer Parts
Do you have a question about this Boat Trailer Parts?

• Dimensions of the CE Smith Tie-Down Bracket for Boat Trailers # CE26214G
  
• I went and pulled a CE Smith Tie-Down Bracket # CE26214G from our warehouse to measure the dimensions and found that the overall length is 4 inches, the width is 1-15/16 inches, the bigger hole is 7/8 of an inch and the smaller hole is 9/16 of an inch. Check out the video I attached that shows me taking these measurements.
  view full answer...